Lines Matching +full:sync +full:- +full:mode
1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Nuno Sá <nuno.sa@analog.com>
14 https://www.analog.com/media/en/technical-documentation/data-sheets/ADIS16475.pdf
19 - adi,adis16475-1
20 - adi,adis16475-2
21 - adi,adis16475-3
22 - adi,adis16477-1
23 - adi,adis16477-2
24 - adi,adis16477-3
25 - adi,adis16470
26 - adi,adis16465-1
27 - adi,adis16465-2
28 - adi,adis16465-3
29 - adi,adis16467-1
30 - adi,adis16467-2
31 - adi,adis16467-3
32 - adi,adis16500
33 - adi,adis16505-1
34 - adi,adis16505-2
35 - adi,adis16505-3
36 - adi,adis16507-1
37 - adi,adis16507-2
38 - adi,adis16507-3
43 spi-cpha: true
45 spi-cpol: true
47 spi-max-frequency:
56 reset-gpios:
63 adi,sync-mode:
65 Configures the device SYNC pin. The following modes are supported
66 0 - output_sync
67 1 - direct_sync
68 2 - scaled_sync
69 3 - pulse_sync
74 adi,scaled-output-hz:
76 This property must be present if the clock mode is scaled-sync through
77 clock-names property. In this mode, the input clock can have a range
84 - compatible
85 - reg
86 - interrupts
87 - spi-cpha
88 - spi-cpol
91 - if:
96 - adi,adis16500
97 - adi,adis16505-1
98 - adi,adis16505-2
99 - adi,adis16505-3
100 - adi,adis16507-1
101 - adi,adis16507-2
102 - adi,adis16507-3
106 adi,sync-mode:
110 - if:
112 adi,sync-mode:
117 adi,sync-mode: [ clocks ]
122 - |
123 #include <dt-bindings/interrupt-controller/irq.h>
125 #address-cells = <1>;
126 #size-cells = <0>;
128 adis16475: adis16475-3@0 {
129 compatible = "adi,adis16475-3";
131 spi-cpha;
132 spi-cpol;
133 spi-max-frequency = <2000000>;
135 interrupt-parent = <&gpio>;