Lines Matching +full:irqs +full:- +full:reserved
4 time, so they have to be muxed to the irq-controller appropriately.
10 - compatible : Should be "ti,irq-crossbar"
11 - reg: Base address and the size of the crossbar registers.
12 - interrupt-controller: indicates that this block is an interrupt controller.
13 - ti,max-irqs: Total number of irqs available at the parent interrupt controller.
14 - ti,max-crossbar-sources: Maximum number of crossbar sources that can be routed.
15 - ti,reg-size: Size of a individual register in bytes. Every individual
17 - ti,irqs-reserved: List of the reserved irq lines that are not muxed using
18 crossbar. These interrupt lines are reserved in the soc,
23 - ti,irqs-skip: This is similar to "ti,irqs-reserved", but these are for
24 SOC-specific hard-wiring of those irqs which unexpectedly bypasses the
25 crossbar. These irqs have a crossbar register, but still cannot be used.
27 - ti,irqs-safe-map: integer which maps to a safe configuration to use
32 compatible = "ti,irq-crossbar";
34 ti,max-irqs = <160>;
35 ti,max-crossbar-sources = <400>;
36 ti,reg-size = <2>;
37 ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
38 ti,irqs-skip = <10 133 139 140>;
43 See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt and
44 Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml for