Lines Matching +full:real +full:- +full:time

4 - compatible: Should be "atmel,sama5d2-chipid"
5 - reg : Should contain registers location and length
8 - compatible: Should be "atmel,at91sam9260-pit"
9 - reg: Should contain registers location and length
10 - interrupts: Should contain interrupt for the PIT which is the IRQ line
14 - compatible: Should be "microchip,sam9x60-pit64b"
15 - reg: Should contain registers location and length
16 - interrupts: Should contain interrupt for PIT64B timer
17 - clocks: Should contain the available clock sources for PIT64B timer.
20 - compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd"
21 - reg: Should contain registers location and length
22 - interrupts: Should contain interrupt for the ST which is the IRQ line
24 - clocks: phandle to input clock.
26 - watchdog: compatible should be "atmel,at91rm9200-wdt"
29 - compatible: Should be "atmel,<chip>-rstc".
31   it also can be "microchip,sam9x60-rstc"
32 - reg: Should contain registers location and length
33 - clocks: phandle to input clock.
38 		compatible = "atmel,at91sam9260-rstc";
44 - compatible: Should be "atmel,at91rm9200-sdramc", "syscon"
45 			"atmel,at91sam9260-sdramc",
46 			"atmel,at91sam9g45-ddramc",
47 			"atmel,sama5d3-ddramc",
48 			"microchip,sam9x60-ddramc"
49 - reg: Should contain registers location and length
54 		compatible = "atmel,at91sam9g45-ddramc";
61 - compatible: Should be "atmel,<chip>-shdwc".
63 - reg: Should contain registers location and length
64 - clocks: phandle to input clock.
67 - atmel,wakeup-mode: String, operation mode of the wakeup mode.
69 - atmel,wakeup-counter: Counter on Wake-up 0 (between 0x0 and 0xf).
72 - atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
75 - atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
76 - atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
79 - atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
84 		compatible = "atmel,at91sam9260-shdwc";
89 SHDWC SAMA5D2-Compatible Shutdown Controller
94 - compatible: should be "atmel,sama5d2-shdwc" or "microchip,sam9x60-shdwc".
95 - reg: should contain registers location and length
96 - clocks: phandle to input clock.
97 - #address-cells: should be one. The cell is the wake-up input index.
98 - #size-cells: should be zero.
102 - debounce-delay-us: minimum wake-up inputs debouncer period in
103   microseconds. It's usually a board-related property.
104 - atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
106 optional microchip,sam9x60-shdwc properties:
107 - atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
109 The node contains child nodes for each wake-up input that the platform uses.
113 Wake-up input nodes are usually described in the "board" part of the Device
114 Tree. Note also that input 0 is linked to the wake-up pin and is frequently
118 - reg: should contain the wake-up input index [0 - 15].
121 - atmel,wakeup-active-high: boolean, the corresponding wake-up input described
122   by the child, forces the wake-up of the core power supply on a high level.
129 		compatible = "atmel,sama5d2-shdwc";
132 		#address-cells = <1>;
133 		#size-cells = <0>;
134 		atmel,wakeup-rtc-timer;
139 		debounce-delay-us = <976>;
147 			atmel,wakeup-active-high;
158 - compatible: Should be "atmel,<chip>-sfr", "syscon" or
159 	"atmel,<chip>-sfrbu", "syscon"
161   It also can be "microchip,sam9x60-sfr", "syscon".
162 - reg: Should contain registers location and length
165 		compatible = "atmel,sama5d3-sfr", "syscon";
176 Note that they maintain their voltage during Backup/Self-refresh.
179 - compatible: Should be "atmel,<chip>-secumod", "syscon".
181 - reg: Should contain registers location and length
182 - gpio-controller:	Marks the port as GPIO controller.
183 - #gpio-cells:		There are 2. The pin number is the
189 		compatible = "atmel,sama5d2-secumod", "syscon";
191 		gpio-controller;
192 		#gpio-cells = <2>;