Lines Matching full:ide
1 IDE-CD driver documentation
11 The ide-cd driver should work with all ATAPI ver 1.2 to ATAPI 2.6 compliant
12 CDROM drives which attach to an IDE interface. Note that some CDROM vendors
19 (CyCDROM CR520ie) which attaches to the IDE port but is not ATAPI;
49 0. The ide-cd relies on the ide disk driver. See
50 Documentation/ide/ide.rst for up-to-date information on the ide
53 1. Make sure that the ide and ide-cd drivers are compiled into the
55 entitled "Floppy, IDE, and other block devices", say either `Y`
61 Include IDE/ATAPI CDROM support
63 Depending on what type of IDE interface you have, you may need to
65 Documentation/ide/ide.rst.
72 3. The CDROM drive should be connected to the host on an IDE
82 on the primary IDE interface are called `hda` and `hdb`,
85 in the third position; see Documentation/ide/ide.rst.)
88 driver, you should make sure your IDE interface uses either the
90 the CDROM drive is the only device on the IDE interface, it should
94 when you boot, however. See Documentation/ide/ide.rst for more
166 Documentation/ide/ide.rst for current information about the underlying
167 IDE support code. Some of these items apply only to earlier versions
176 Documentation/ide/ide.rst, and check how your hardware is
179 - If your drive is the only device on an IDE interface, it should
182 - If your IDE interface is not at the standard addresses of 0x170
184 lilo option. See Documentation/ide/ide.rst. (This feature was
202 - Some IDE adapters require a nonstandard initialization sequence
205 IDE interfaces on sound cards often fall into this category.
210 see Documentation/ide/ide.rst.
232 number of your IDE interface matches what the driver expects.
258 likely cause is that you have a buggy IDE adapter which doesn't
264 foolproof. See Documentation/ide/ide.rst for more information
300 scripts/MAKEDEV.ide. (You may have to make it executable