Lines Matching +full:locality +full:- +full:specific
16 - Required: DSDT, FADT, GTDT, MADT, MCFG, RSDP, SPCR, XSDT
18 - Recommended: BERT, EINJ, ERST, HEST, PCCT, SSDT
20 - Optional: BGRT, CPEP, CSRT, DBG2, DRTM, ECDT, FACS, FPDT, IORT,
24 - Not supported: BOOT, DBGP, DMAR, ETDT, HPET, IBFT, IVRS, LPIT,
47 Optional, not currently supported, with no real use-case for an
55 time as ARM-compatible hardware is available, and the specification
123 UEFI-based; if it is UEFI-based, this table may be supplied. When this
139 the hardware reduced profile, and only 64-bit address fields will
156 filled in properly - that the PSCI_COMPLIANT flag is set and that
157 PSCI_USE_HVC is set or unset as needed (see table 5-37).
178 ARM-specific error sources have been defined; please use those or the
207 when using GICv3-ITS and an SMMU); on SBSA Level 0 platforms, it
230 should be used (types 0xA - 0xF).
234 **Memory-mapped ConFiGuration space**
270 **OEM Specific Tables**
274 to very specific end users, they are not recommended for use and are
312 Since this table can only provide 32-bit addresses, it is deprecated
329 **System Locality distance Information Table**
433 ------------
443 on arm64 - there are no assumptions made about
453 default to non-coherent, but be made coherent with
461 _CPC 8.4.7.1 Use as needed, power management specific. CPPC is
469 of C-states.
527 \_SB._OSC), or it may be associated with a specific
531 a device-specific method, the process described for
533 out-of-process use of _OSC is not allowed. That is,
534 submit the device-specific _OSC usage description as
555 _PRx 7.3.8-11 Use as needed; power management specific. If _PR0 is
558 _PSx 7.3.2-5 Use as needed; power management specific. If _PS0 is
588 _SWS 7.4.3 Use as needed; power management specific; this may
599 ----------------
604 There are two options: GPIO-signaled interrupts (Section 5.6.5), and
605 interrupt-signaled events (Section 5.6.9). Interrupt-signaled events are a
606 new feature in the ACPI 6.1 specification. Either - or both - can be used
608 given SoC. If possible, interrupt-signaled events are recommended.
612 ----------------------
633 performance control on arm64. C-states and P-states may become available at
644 ----------------------------------
652 -------------------------------------
672 -----------------------------------
677 may not even be a non-ARM implementation yet. Hence, they are not currently
682 - Section 9.2: ambient light sensor devices
684 - Section 9.3: battery devices
686 - Section 9.4: lids (e.g., laptop lids)
688 - Section 9.8.2: IDE controllers
690 - Section 9.9: floppy controllers
692 - Section 9.10: GPE block devices
694 - Section 9.15: PC/AT RTC/CMOS devices
696 - Section 9.16: user presence detection devices
698 - Section 9.17: I/O APIC devices; all GICs must be enumerable via MADT
700 - Section 9.18: time and alarm devices (see 9.15)
702 - Section 10: power source and power meter devices
704 - Section 11: thermal management
706 - Section 12: embedded controllers interface
708 - Section 13: SMBus interfaces