Lines Matching full:kernel

10    and a basic Linux kernel WiMAX stack.
15 * Linux installation with Linux kernel 2.6.22 or newer (if building
21 + Linux kernel development package for the target kernel; to
22 build against your currently running kernel, you need to have
23 the kernel development package corresponding to the running
24 image installed (usually if your kernel is named
32 2.1. Compilation of the drivers included in the kernel
35 Configure the kernel; to enable the WiMAX drivers select Drivers >
39 If USB or SDIO are not enabled in the kernel configuration, the options
43 Compile and install your kernel as usual.
56 To install in the default kernel directories (and enable auto loading
62 If your kernel development files are located in a non standard
63 directory or if you want to build for a kernel that is not the
66 $ make KDIR=/path/to/kernel/dev/tree
90 This package contains two major parts: a WiMAX kernel stack and a
97 The i2400m kernel driver is broken up in two main parts: the bus
111 abstraction layers are used, so to port to another OS, the Linux kernel
120 and output messages in the kernel log (dmesg, /var/log/messages or
136 Module parameters can be set at kernel or module load time or by
150 During kernel bootup (if the driver is linked in the kernel), specify
151 the following to the kernel command line::
170 * /sys/kernel/debug/wimax:DEVNAME/ for the generic WiMAX stack
172 * /sys/kernel/debug/wimax:DEVNAME/i2400m for the i2400m generic
174 * /sys/kernel/debug/wimax:DEVNAME/i2400m-usb (or -sdio) for the
178 /sys/kernel/debug, those paths will change.
186 # find /sys/kernel/debug/wimax\:wmx0 -name \*dl_\*
187 /sys/kernel/debug/wimax:wmx0/i2400m-usb/dl_tx
188 /sys/kernel/debug/wimax:wmx0/i2400m-usb/dl_rx
189 /sys/kernel/debug/wimax:wmx0/i2400m-usb/dl_notif
190 /sys/kernel/debug/wimax:wmx0/i2400m-usb/dl_fw
191 /sys/kernel/debug/wimax:wmx0/i2400m-usb/dl_usb
192 /sys/kernel/debug/wimax:wmx0/i2400m/dl_tx
193 /sys/kernel/debug/wimax:wmx0/i2400m/dl_rx
194 /sys/kernel/debug/wimax:wmx0/i2400m/dl_rfkill
195 /sys/kernel/debug/wimax:wmx0/i2400m/dl_netdev
196 /sys/kernel/debug/wimax:wmx0/i2400m/dl_fw
197 /sys/kernel/debug/wimax:wmx0/i2400m/dl_debugfs
198 /sys/kernel/debug/wimax:wmx0/i2400m/dl_driver
199 /sys/kernel/debug/wimax:wmx0/i2400m/dl_control
200 /sys/kernel/debug/wimax:wmx0/wimax_dl_stack
201 /sys/kernel/debug/wimax:wmx0/wimax_dl_op_rfkill
202 /sys/kernel/debug/wimax:wmx0/wimax_dl_op_reset
203 /sys/kernel/debug/wimax:wmx0/wimax_dl_op_msg
204 /sys/kernel/debug/wimax:wmx0/wimax_dl_id_table
205 /sys/kernel/debug/wimax:wmx0/wimax_dl_debugfs
213 $ echo 3 > /sys/kernel/debug/wimax:wmx0/i2400m/dl_tx
225 $ cat /sys/kernel/debug/wimax:wmx0/i2400m/rx_stats
239 $ echo 1 > /sys/kernel/debug/wimax:wmx0/i2400m_rx_stats
254 $ echo 1 > /sys/kernel/debug/wimax:wmx0/i2400m/trace_msg_from_user
260 /sys/kernel/debug/wimax:wmx0/reset, the driver performs a warm (without
267 By writing any value to the /sys/kernel/debug/wimax:wmx0 file, the
276 If upon connecting the device, the following is output in the kernel