Lines Matching refs:workload
10 variety of diverse workload requirements.
82 This feature allows configuration of a server dynamically based on workload
216 workload, disable turbo::
220 Then runs a busy workload on all CPUs, for example::
262 level 0 to 2800 MHz at performance level 4. As a result, any workload, which can
518 the user control base frequency. If some critical workload threads demand
546 Before enabling Intel(R) SST-BF and measuring its impact on a workload
547 performance, execute some workload and measure performance and get a baseline
562 To compare, pick a multi-threaded workload where each thread can be scheduled on
566 Below, the workload is measuring average scheduler wakeup latency, so a lower
627 SST-BF feature particularly for the above "sched pipe" workload since only two
666 With this configuration, if the same workload is executed by pinning the
667 workload to high priority CPUs (CPU 5 and 6 in this case)::
786 MHz can be achieved. If there is some busy workload on cpu 0 - 11 (e.g. stress)
787 and on CPU 12 and 13, execute "hackbench pipe" workload::
857 In turn, for the hackbench workload, two CPUs can be set as high priority and
899 If the same hackbench workload is executed, schedule hackbench threads on high