Lines Matching +full:1 +full:mhz
69 Platform: API version : 1
70 Platform: Driver version : 1
71 Platform: mbox supported : 1
72 Platform: mmio supported : 1
106 package-1
131 package-1
152 enable-cpu-list:0,1,2,3,4,5,6,7,8,9,10,11,12,13,28,29,30,31,32,33,34,35,36,37,38,39,40,41
154 base-frequency(MHz):2600
168 condition is met, then base frequency of 2600 MHz can be maintained. To
181 enable-cpu-list:0,1,2,3,5,7,8,9,10,11,28,29,30,31,33,35,36,37,38,39
183 base-frequency(MHz):2800
211 This matches the base-frequency (MHz) field value displayed from the
218 # echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo
226 #turbostat -c 0-13 --show Package,Core,CPU,Bzy_MHz -i 1
231 0 1 1 2600
261 Which shows that the base frequency now increased from 2600 MHz at performance
262 level 0 to 2800 MHz at performance level 4. As a result, any workload, which can
263 use fewer CPUs, can see a boost of 200 MHz compared to performance level 0.
326 0: Proportional, 1: Ordered
357 package-1
379 package-1
402 Specify clos min in MHz with [--min|-n]
403 Specify clos max in MHz with [--max|-m]
412 clos min is not specified, default: 0 MHz
413 clos max is not specified, default: 25500 MHz
420 package-1
445 clos-min:0 MHz
447 clos-desired:0 MHz
448 package-1
455 clos-min:0 MHz
457 clos-desired:0 MHz
492 package-1
553 #echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo
556 frequency of guaranteed frequency 2600 MHz.
580 #turbostat -c 0-13 --show Package,Core,CPU,Bzy_MHz -i 1
583 0 1 1 1005
598 full guaranteed frequency of 2600 MHz.
613 high-priority-base-frequency(MHz):3000
616 low-priority-base-frequency(MHz):2400
621 offer base frequency of 3000 MHz compared to the standard base frequency at this
625 high-priority-cpu-list) can only offer up to 2400 MHz. As a result, if this
629 400 MHz.
644 package-1
678 observed that the high priority CPUs reached 3000 MHz compared to 2600 MHz.
681 #turbostat -c 0-13 --show Package,Core,CPU,Bzy_MHz -i 1
684 0 1 1 2166
762 max-turbo-frequency(MHz):3200
763 bucket-1
765 max-turbo-frequency(MHz):3100
768 max-turbo-frequency(MHz):3100
771 max-turbo-frequency(MHz):3100
774 max-turbo-frequency(MHz):3100
777 max-turbo-frequency(MHz):3100
780 max-turbo-frequency(MHz):3100
783 max-turbo-frequency(MHz):3100
786 MHz can be achieved. If there is some busy workload on cpu 0 - 11 (e.g. stress)
798 #turbostat -c 0-13 --show Package,Core,CPU,Bzy_MHz -i 1
801 0 1 1 3000
816 MHz. To check if the hackbench performance can be improved for CPU 12 and CPU
834 high-priority-max-frequency(MHz):3200
835 high-priority-max-avx2-frequency(MHz):3200
836 high-priority-max-avx512-frequency(MHz):3100
837 bucket-1
839 high-priority-max-frequency(MHz):3100
840 high-priority-max-avx2-frequency(MHz):3000
841 high-priority-max-avx512-frequency(MHz):2900
844 high-priority-max-frequency(MHz):3100
845 high-priority-max-avx2-frequency(MHz):3000
846 high-priority-max-avx512-frequency(MHz):2900
848 low-priority-max-frequency(MHz):2600
849 low-priority-max-avx2-frequency(MHz):2400
850 low-priority-max-avx512-frequency(MHz):2100
854 turbo frequency on those cores can be increased to 3200 MHz. This is 100 MHz
859 cores will be clipped to a lower frequency of 2600 MHz.
879 package--1
910 turbostat output will show that the CPU 12 and CPU 13 are getting 100 MHz boost.
913 #turbostat -c 0-13 --show Package,Core,CPU,Bzy_MHz -i 1