Lines Matching +full:50 +full:mhz

335 supports frames per second settings of 10, 15, 25, 30, 50 and 60 fps. Which ones
358 visible. For 50 Hz standards the top field is the oldest and the bottom field
363 contain the top field for 50 Hz standards and the bottom field for 60 Hz
378 The TV 'tuner' supports a frequency range of 44-958 MHz. Channels are available
379 every 6 MHz, starting from 49.25 MHz. For each channel the generated image
380 will be in color for the +/- 0.25 MHz around it, and in grayscale for
381 +/- 1 MHz around the channel. Beyond that it is just noise. The VIDIOC_G_TUNER
382 ioctl will return 100% signal strength for +/- 0.25 MHz and 50% for +/- 1 MHz.
386 The audio subchannels that are returned are MONO for the +/- 1 MHz range around
387 a valid channel frequency. When the frequency is within +/- 0.25 MHz of the
403 interlaced, for pixelclock frequencies between 25 and 600 MHz. The field
461 interlaced, for pixelclock frequencies between 25 and 600 MHz. The field
488 The XDS stream will give the current time once a minute. For 50 Hz standards
504 for 50 Hz standards and Closed Captioning + XDS for 60 Hz standards.
516 	- FM: 64 MHz - 108 MHz
518 	- SW: 2300 kHz - 26.1 MHz
520 Valid channels are emulated every 1 MHz for FM and every 100 kHz for AM and SW.
522 frequency until it becomes 0% at +/- 50 kHz (FM) or 5 kHz (AM/SW) from the
524 95 MHz.
534 errors are randomly introduced into the block I/O stream, up to 50% of all
552 	- FM: 64 MHz - 108 MHz
554 	- SW: 2300 kHz - 26.1 MHz
556 The initial frequency when the driver is loaded is 95.5 MHz.
573 The RF tuner supports 50 MHz - 2000 MHz.
1150   So it is not possible to loop a 50 Hz (720x576) S-Video output to a 60 Hz
1183 and WSS (50 Hz formats) VBI data is looped. Teletext VBI data is not looped.