Lines Matching +full:0 +full:x10101
63 hexadecimal values, one for each instance. The default is 0x1d3d.
66 - bit 0: Video Capture node
67 - bit 2-3: VBI Capture node: 0 = none, 1 = raw vbi, 2 = sliced vbi, 3 = both
71 - bit 10-11: VBI Output node: 0 = none, 1 = raw vbi, 2 = sliced vbi, 3 = both
84 n_devs=4 node_types=0x1,0x1,0x100,0x100
94 the input types for each instance, the default is 0xe4. This defines
97 pair gives the type and bits 0-1 map to input 0, bits 2-3 map to input 1,
105 So to create a video capture device with 8 inputs where input 0 is a TV
111 num_inputs=8 input_types=0xffa9
121 the output types for each instance, the default is 0x02. This defines
124 gives the type and bit 0 maps to output 0, bit 1 maps to output 1, bit
127 - 0: this is an S-Video output
130 So to create a video output device with 8 outputs where outputs 0-3 are
136 num_outputs=8 output_types=0xf0
207 each enabling (1) or disabling (0) one of the features:
209 - bit 0:
239 each enabling (1) or disabling (0) one of the features:
241 - bit 0:
290 memory allocator selection, default is 0. It specifies the way buffers
293 - 0: vmalloc
300 The hints are valid only when using MMAP streaming I/O. Default is 0.
302 - 0: forbid hints
522 frequency until it becomes 0% at +/- 50 kHz (FM) or 5 kHz (AM/SW) from the
540 0B group, and also radio text and the current time.
809 the no_error_inj module option is set to 0 (the default).
815 -1 and if the no_error_inj module option is set to 0 (the default).
822 module option is set to 0 (the default).
849 the no_error_inj module option is set to 0 (the default).
855 -1 and if the no_error_inj module option is set to 0 (the default).
862 module option is set to 0 (the default).
908 is set to 0 (the default). These controls are valid for video and vbi
1238 The driver supports all the regular packed and planar 4:4:4, 4:2:2 and 4:2:0
1245 0 otherwise.
1265 is so much more capable. By setting flag 0x10000 in the node_types module
1295 $ sudo modprobe vivid n_devs=2 node_types=0x10101,0x1
1297 /dev/fb1 is the framebuffer associated with base address 0x12800000
1349 framebuffer by setting flag 0x10000 in the node_types module option. The
1374 containing physical address A.B.C.0 where C is 1 to the number of inputs. If