Lines Matching +full:usb +full:- +full:sdp
1 0 Unnamed devices (e.g. non-device mounts)
11 6 = /dev/core OBSOLETE - replaced by /proc/kcore
18 12 = /dev/oldmem OBSOLETE - replaced by /proc/vmcore
31 2 char Pseudo-TTY masters
37 Pseudo-tty's are named as follows:
40 the 1st through 16th series of 16 pseudo-ttys each, and
44 These are the old-style (BSD) PTY devices; Unix98
106 3 char Pseudo-TTY slaves
112 These are the old-style (BSD) PTY devices; Unix98
115 3 block First MFM, RLL and IDE hard disk/CD-ROM interface
116 0 = /dev/hda Master: whole disk (or CD-ROM)
117 64 = /dev/hdb Slave: whole disk (or CD-ROM)
126 For Linux/i386, partitions 1-4 are the primary
149 because the root filesystem is mounted read-only.
200 8 block SCSI disk devices (0-15)
205 240 = /dev/sdp Sixteenth SCSI disk whole disk
250 10 char Non-serial mice, misc features
252 1 = /dev/psaux PS/2-style mouse port
255 4 = /dev/jbm J-mouse
261 9 = /dev/pc110pad IBM PC-110 digitizer pad
278 141 = /dev/relay16 Berkshire Products ISO-16 relay card
281 144 = /dev/nvram Non-volatile configuration RAM
298 161 = /dev/userdma User-space DMA access
316 179 = /dev/xsvc High-speed shared-mem/semaphore service
319 182 = /dev/perfctr Performance-monitoring counters
329 193 = /dev/d7s SPARC 7-segment display
330 194 = /dev/zkshim Zero-Knowledge network shim control
331 195 = /dev/elographics/e2201 Elographics touchscreen E271-2201
333 197 = /dev/pxa3xx-gcu PXA3xx graphics controller unit driver
337 201 = /dev/button/gulpb Transmeta GULP-B buttons
339 203 = /dev/cuse Cuse (character device in user-space)
354 218 = /dev/kchuid Inter-process chuid control
365 229 = /dev/fuse Fuse (virtual filesystem in user-space)
368 232 = /dev/kvm Kernel-based virtual machine (hardware virtualization extensions)
369 233 = /dev/kmview View-OS A process with a view
370 234 = /dev/btrfs-control Btrfs control device
372 236 = /dev/mapper/control Device-Mapper control device
373 237 = /dev/loop-control Loopback control device
374 238 = /dev/vhost-net Host kernel accelerator for virtio net
375 239 = /dev/uhid User-space I/O driver support for HID subsystem
377 241 = /dev/vhost-vsock Host kernel driver for virtio vsock
380 243-254 Reserved for local use
386 11 char Serial Mux device (Linux/PA-RISC only)
391 11 block SCSI CD-ROM devices
392 0 = /dev/scd0 First SCSI CD-ROM
393 1 = /dev/scd1 Second SCSI CD-ROM
398 12 char QIC-02 tape
399 2 = /dev/ntpqic11 QIC-11, no rewind-on-close
400 3 = /dev/tpqic11 QIC-11, rewind-on-close
401 4 = /dev/ntpqic24 QIC-24, no rewind-on-close
402 5 = /dev/tpqic24 QIC-24, rewind-on-close
403 6 = /dev/ntpqic120 QIC-120, no rewind-on-close
404 7 = /dev/tpqic120 QIC-120, rewind-on-close
405 8 = /dev/ntpqic150 QIC-150, no rewind-on-close
406 9 = /dev/tpqic150 QIC-150, rewind-on-close
408 The device names specified are proposed -- if there
435 4 = /dev/audio Sun-compatible digital audio
438 8 = /dev/sequencer2 Sequencer -- alternate device
457 15 block Sony CDU-31A/CDU-33A CD-ROM
458 0 = /dev/sonycd Sony CDU-31a CD-ROM
460 16 char Non-SCSI scanners
463 16 block GoldStar CD-ROM
464 0 = /dev/gscd GoldStar CD-ROM
470 17 block Optics Storage CD-ROM
471 0 = /dev/optcd Optics Storage CD-ROM
473 18 char OBSOLETE (was Chase serial card - alternate devices)
477 18 block Sanyo CD-ROM
478 0 = /dev/sjcd Sanyo CD-ROM
496 20 char Cyclades serial card - alternate devices
501 20 block Hitachi CD-ROM (under development)
502 0 = /dev/hitcd Hitachi CD-ROM
512 device-naming practice.
518 This device is used on the ARM-based Acorn RiscPC.
526 22 block Second IDE hard disk/CD-ROM interface
527 0 = /dev/hdc Master: whole disk (or CD-ROM)
528 64 = /dev/hdd Slave: whole disk (or CD-ROM)
533 23 char Digiboard serial card - alternate devices
537 23 block Mitsumi proprietary CD-ROM
538 0 = /dev/mcd Mitsumi CD-ROM
553 24 block Sony CDU-535 CD-ROM
554 0 = /dev/cdu535 Sony CDU-535 CD-ROM
556 25 char Stallion serial card - alternate devices
569 25 block First Matsushita (Panasonic/SoundBlaster) CD-ROM
570 0 = /dev/sbpcd0 Panasonic CD-ROM controller 0 unit 0
571 1 = /dev/sbpcd1 Panasonic CD-ROM controller 0 unit 1
572 2 = /dev/sbpcd2 Panasonic CD-ROM controller 0 unit 2
573 3 = /dev/sbpcd3 Panasonic CD-ROM controller 0 unit 3
577 26 block Second Matsushita (Panasonic/SoundBlaster) CD-ROM
578 0 = /dev/sbpcd4 Panasonic CD-ROM controller 1 unit 0
579 1 = /dev/sbpcd5 Panasonic CD-ROM controller 1 unit 1
580 2 = /dev/sbpcd6 Panasonic CD-ROM controller 1 unit 2
581 3 = /dev/sbpcd7 Panasonic CD-ROM controller 1 unit 3
583 27 char QIC-117 tape
584 0 = /dev/qft0 Unit 0, rewind-on-close
585 1 = /dev/qft1 Unit 1, rewind-on-close
586 2 = /dev/qft2 Unit 2, rewind-on-close
587 3 = /dev/qft3 Unit 3, rewind-on-close
588 4 = /dev/nqft0 Unit 0, no rewind-on-close
589 5 = /dev/nqft1 Unit 1, no rewind-on-close
590 6 = /dev/nqft2 Unit 2, no rewind-on-close
591 7 = /dev/nqft3 Unit 3, no rewind-on-close
592 16 = /dev/zqft0 Unit 0, rewind-on-close, compression
593 17 = /dev/zqft1 Unit 1, rewind-on-close, compression
594 18 = /dev/zqft2 Unit 2, rewind-on-close, compression
595 19 = /dev/zqft3 Unit 3, rewind-on-close, compression
596 20 = /dev/nzqft0 Unit 0, no rewind-on-close, compression
597 21 = /dev/nzqft1 Unit 1, no rewind-on-close, compression
598 22 = /dev/nzqft2 Unit 2, no rewind-on-close, compression
599 23 = /dev/nzqft3 Unit 3, no rewind-on-close, compression
600 32 = /dev/rawqft0 Unit 0, rewind-on-close, no file marks
601 33 = /dev/rawqft1 Unit 1, rewind-on-close, no file marks
602 34 = /dev/rawqft2 Unit 2, rewind-on-close, no file marks
603 35 = /dev/rawqft3 Unit 3, rewind-on-close, no file marks
604 36 = /dev/nrawqft0 Unit 0, no rewind-on-close, no file marks
605 37 = /dev/nrawqft1 Unit 1, no rewind-on-close, no file marks
606 38 = /dev/nrawqft2 Unit 2, no rewind-on-close, no file marks
607 39 = /dev/nrawqft3 Unit 3, no rewind-on-close, no file marks
609 27 block Third Matsushita (Panasonic/SoundBlaster) CD-ROM
610 0 = /dev/sbpcd8 Panasonic CD-ROM controller 2 unit 0
611 1 = /dev/sbpcd9 Panasonic CD-ROM controller 2 unit 1
612 2 = /dev/sbpcd10 Panasonic CD-ROM controller 2 unit 2
613 3 = /dev/sbpcd11 Panasonic CD-ROM controller 2 unit 3
615 28 char Stallion serial card - card programming
625 28 block Fourth Matsushita (Panasonic/SoundBlaster) CD-ROM
626 0 = /dev/sbpcd12 Panasonic CD-ROM controller 3 unit 0
627 1 = /dev/sbpcd13 Panasonic CD-ROM controller 3 unit 1
628 2 = /dev/sbpcd14 Panasonic CD-ROM controller 3 unit 2
629 3 = /dev/sbpcd15 Panasonic CD-ROM controller 3 unit 3
648 29 block Aztech/Orchid/Okano/Wearnes CD-ROM
649 0 = /dev/aztcd Aztech CD-ROM
651 30 char iBCS-2 compatibility devices
665 Additionally, iBCS-2 requires the following links:
667 /dev/ip -> /dev/inet/ip
668 /dev/icmp -> /dev/inet/icmp
669 /dev/ggp -> /dev/inet/ggp
670 /dev/ipip -> /dev/inet/ipip
671 /dev/tcp -> /dev/inet/tcp
672 /dev/egp -> /dev/inet/egp
673 /dev/pup -> /dev/inet/pup
674 /dev/udp -> /dev/inet/udp
675 /dev/idp -> /dev/inet/idp
676 /dev/rawip -> /dev/inet/rawip
677 /dev/inet/arp -> /dev/inet/udp
678 /dev/inet/rip -> /dev/inet/udp
679 /dev/nfsd -> /dev/socksys
680 /dev/X0R -> /dev/null (? apparently not required ?)
682 30 block Philips LMS CM-205 CD-ROM
683 0 = /dev/cm205cd Philips LMS CM-205 CD-ROM
686 driver does not work with the CM-205MS CD-ROM.
688 31 char MPU-401 MIDI
689 0 = /dev/mpu401data MPU-401 data port
690 1 = /dev/mpu401stat MPU-401 status port
706 The read-write (rw) devices support back-caching
708 devices. The read-only devices (ro) support reading
715 32 block Philips LMS CM-206 CD-ROM
716 0 = /dev/cm206cd Philips LMS CM-206 CD-ROM
718 33 char Specialix serial card - alternate devices
722 33 block Third IDE hard disk/CD-ROM interface
723 0 = /dev/hde Master: whole disk (or CD-ROM)
724 64 = /dev/hdf Slave: whole disk (or CD-ROM)
740 34 block Fourth IDE hard disk/CD-ROM interface
741 0 = /dev/hdg Master: whole disk (or CD-ROM)
742 64 = /dev/hdh Slave: whole disk (or CD-ROM)
778 128 = /dev/nht0 First IDE tape, no rewind-on-close
779 129 = /dev/nht1 Second IDE tape, no rewind-on-close
798 39 char ML-16P experimental I/O board
799 0 = /dev/ml16pa-a0 First card, first analog channel
800 1 = /dev/ml16pa-a1 First card, second analog channel
802 15 = /dev/ml16pa-a15 First card, 16th analog channel
803 16 = /dev/ml16pa-d First card, digital lines
804 17 = /dev/ml16pa-c0 First card, first counter/timer
805 18 = /dev/ml16pa-c1 First card, second counter/timer
806 19 = /dev/ml16pa-c2 First card, third counter/timer
807 32 = /dev/ml16pb-a0 Second card, first analog channel
808 33 = /dev/ml16pb-a1 Second card, second analog channel
810 47 = /dev/ml16pb-a15 Second card, 16th analog channel
811 48 = /dev/ml16pb-d Second card, digital lines
812 49 = /dev/ml16pb-c0 Second card, first counter/timer
813 50 = /dev/ml16pb-c1 Second card, second counter/timer
814 51 = /dev/ml16pb-c2 Second card, third counter/timer
859 44 char isdn4linux virtual modem - alternate devices
903 46 block Parallel port ATAPI CD-ROM devices
904 0 = /dev/pcd0 First parallel port ATAPI CD-ROM
905 1 = /dev/pcd1 Second parallel port ATAPI CD-ROM
906 2 = /dev/pcd2 Third parallel port ATAPI CD-ROM
907 3 = /dev/pcd3 Fourth parallel port ATAPI CD-ROM
909 47 char Comtrol Rocketport serial card - alternate devices
938 49 char SDL RISCom serial card - alternate devices
958 51 char Baycom radio modem OR Radio Tech BIM-XXX-RS232 radio modem
1013 24-hour heart monitoring equipment.
1040 56 block Fifth IDE hard disk/CD-ROM interface
1041 0 = /dev/hdi Master: whole disk (or CD-ROM)
1042 64 = /dev/hdj Slave: whole disk (or CD-ROM)
1052 57 block Sixth IDE hard disk/CD-ROM interface
1053 0 = /dev/hdk Master: whole disk (or CD-ROM)
1054 64 = /dev/hdl Slave: whole disk (or CD-ROM)
1059 58 char Hayes ESP serial card - alternate devices
1080 NAMING CONFLICT -- PROPOSED REVISED NAME /dev/rpda0 etc
1082 60-63 char LOCAL/EXPERIMENTAL USE
1084 60-63 block LOCAL/EXPERIMENTAL USE
1128 65 block SCSI disk devices (16-31)
1144 66 block SCSI disk devices (32-47)
1160 67 block SCSI disk devices (48-63)
1181 68 block SCSI disk devices (64-79)
1195 69 block SCSI disk devices (80-95)
1215 70 block SCSI disk devices (96-111)
1244 71 block SCSI disk devices (112-127)
1255 72 char Computone IntelliPort II serial card - alternate devices
1283 73 char Computone IntelliPort II serial card - control devices
1308 Currently for Dolphin Interconnect Solutions' PCI-SCI
1338 76 char Specialix IO8+ serial card - alternate devices
1384 79 char PAM Software's multimodem boards - alternate devices
1520 87 char Sony Control-A1 stereo control bus
1540 88 block Seventh IDE hard disk/CD-ROM interface
1541 0 = /dev/hdm Master: whole disk (or CD-ROM)
1542 64 = /dev/hdn Slave: whole disk (or CD-ROM)
1548 0 = /dev/i2c-0 First I2C adapter
1549 1 = /dev/i2c-1 Second I2C adapter
1552 89 block Eighth IDE hard disk/CD-ROM interface
1553 0 = /dev/hdo Master: whole disk (or CD-ROM)
1554 64 = /dev/hdp Slave: whole disk (or CD-ROM)
1566 90 block Ninth IDE hard disk/CD-ROM interface
1567 0 = /dev/hdq Master: whole disk (or CD-ROM)
1568 64 = /dev/hdr Slave: whole disk (or CD-ROM)
1573 91 char CAN-Bus devices
1574 0 = /dev/can0 First CAN-Bus controller
1575 1 = /dev/can1 Second CAN-Bus controller
1578 91 block Tenth IDE hard disk/CD-ROM interface
1579 0 = /dev/hds Master: whole disk (or CD-ROM)
1580 64 = /dev/hdt Slave: whole disk (or CD-ROM)
1663 98 block User-mode virtual block device
1664 0 = /dev/ubda First user-mode block device
1665 16 = /dev/ubdb Second user-mode block device
1672 This device is used by the user-mode virtual kernel port.
1726 write to <arla-drinkers@stacken.kth.se> or see
1744 105 char Comtrol VS-1000 serial controller
1745 0 = /dev/ttyV0 First VS-1000 port
1746 1 = /dev/ttyV1 Second VS-1000 port
1759 106 char Comtrol VS-1000 serial controller - alternate devices
1760 0 = /dev/cuv0 First VS-1000 port
1761 1 = /dev/cuv1 Second VS-1000 port
1844 There is currently a device-naming conflict between
1860 113 char ISI serial card - alternate devices
1865 113 block IBM iSeries virtual CD-ROM
1866 0 = /dev/iseries/vcda First virtual CD-ROM
1867 1 = /dev/iseries/vcdb Second virtual CD-ROM
1909 16 = /dev/tiusb0 First USB cable
1911 47 = /dev/tiusb31 32nd USB cable
1913 115 block NetWare (NWFS) Devices (0-255)
1956 The EVMS driver uses a layered, plug-in model to provide
1991 120-127 char LOCAL/EXPERIMENTAL USE
1993 120-127 block LOCAL/EXPERIMENTAL USE
1998 128-135 char Unix98 PTY masters
2004 128 block SCSI disk devices (128-143)
2015 129 block SCSI disk devices (144-159)
2028 130 block SCSI disk devices (160-175)
2039 131 block SCSI disk devices (176-191)
2050 132 block SCSI disk devices (192-207)
2061 133 block SCSI disk devices (208-223)
2072 134 block SCSI disk devices (224-239)
2083 135 block SCSI disk devices (240-255)
2094 136-143 char Unix98 PTY slaves
2095 0 = /dev/pts/0 First Unix98 pseudo-TTY
2096 1 = /dev/pts/1 Second Unix98 pseudo-TTY
2177 The SST 5136-DN DeviceNet interface driver has been
2180 144 block Expansion Area #1 for more non-device (e.g. NFS) mounts
2184 145 char SAM9407-based soundcard
2205 145 block Expansion Area #2 for more non-device (e.g. NFS) mounts
2209 146 char SYSTRAM SCRAMNet mirrored-memory network
2214 146 block Expansion Area #3 for more non-device (e.g. NFS) mounts
2233 149 char Technology Concepts serial card - alternate devices
2238 150 char Real-Time Linux FIFOs
2285 155 char Specialix RIO serial card - alternate devices
2295 157 char Specialix RIO serial card - alternate devices
2314 160 block Carmel 8-port SATA Disks on First Controller
2337 161 block Carmel 8-port SATA Disks on Second Controller
2362 164 char Chase Research AT/PCI-Fast serial card
2363 0 = /dev/ttyCH0 AT/PCI-Fast board 0, port 0
2365 15 = /dev/ttyCH15 AT/PCI-Fast board 0, port 15
2366 16 = /dev/ttyCH16 AT/PCI-Fast board 1, port 0
2368 31 = /dev/ttyCH31 AT/PCI-Fast board 1, port 15
2369 32 = /dev/ttyCH32 AT/PCI-Fast board 2, port 0
2371 47 = /dev/ttyCH47 AT/PCI-Fast board 2, port 15
2372 48 = /dev/ttyCH48 AT/PCI-Fast board 3, port 0
2374 63 = /dev/ttyCH63 AT/PCI-Fast board 3, port 15
2376 165 char Chase Research AT/PCI-Fast serial card - alternate devices
2381 166 char ACM USB modems
2386 167 char ACM USB modems - alternate devices
2397 0 = /dev/ecsa8-0 First CSA8000
2398 1 = /dev/ecsa8-1 Second CSA8000
2415 173 char Moxa Intellio serial card - alternate devices
2426 175 char SmartIO serial card - alternate devices
2464 179 char CCube DVXChip-based PCI products
2469 180 char USB devices
2470 0 = /dev/usb/lp0 First USB printer
2472 15 = /dev/usb/lp15 16th USB printer
2473 48 = /dev/usb/scanner0 First USB scanner
2475 63 = /dev/usb/scanner15 16th USB scanner
2476 64 = /dev/usb/rio500 Diamond Rio 500
2477 65 = /dev/usb/usblcd USBLCD Interface (info@usblcd.de)
2478 66 = /dev/usb/cpad0 Synaptics cPad (mouse/LCD)
2479 96 = /dev/usb/hiddev0 1st USB HID device
2481 111 = /dev/usb/hiddev15 16th USB HID device
2482 112 = /dev/usb/auer0 1st auerswald ISDN device
2484 127 = /dev/usb/auer15 16th auerswald ISDN device
2485 128 = /dev/usb/brlvgr0 First Braille Voyager device
2487 131 = /dev/usb/brlvgr3 Fourth Braille Voyager device
2488 132 = /dev/usb/idmouse ID Mouse (fingerprint scanner) device
2489 133 = /dev/usb/sisusbvga1 First SiSUSB VGA device
2491 140 = /dev/usb/sisusbvga8 Eighth SISUSB VGA device
2492 144 = /dev/usb/lcd USB LCD device
2493 160 = /dev/usb/legousbtower0 1st USB Legotower device
2495 175 = /dev/usb/legousbtower15 16th USB Legotower device
2496 176 = /dev/usb/usbtmc1 First USB TMC device
2498 191 = /dev/usb/usbtmc16 16th USB TMC device
2499 192 = /dev/usb/yurex1 First USB Yurex device
2501 209 = /dev/usb/yurex16 16th USB Yurex device
2503 180 block USB block devices
2504 0 = /dev/uba First USB block device
2505 8 = /dev/ubb Second USB block device
2506 16 = /dev/ubc Third USB block device
2519 183 char SST 5136-DN DeviceNet interface
2538 http://inter-mezzo.org/index.html
2540 186 char Object-based storage control device
2552 188 char USB serial converters
2553 0 = /dev/ttyUSB0 First USB serial converter
2554 1 = /dev/ttyUSB1 Second USB serial converter
2557 189 char USB serial converters - alternate devices
2575 193 char Kernel event-tracing interface
2609 49 = /dev/tor/49 First pseudo-channel
2610 50 = /dev/tor/50 Second pseudo-channel
2658 202 char CPU model-specific registers
2679 204 char Low-density serial ports
2680 0 = /dev/ttyLU0 LinkUp Systems L72xx UART - port 0
2681 1 = /dev/ttyLU1 LinkUp Systems L72xx UART - port 1
2682 2 = /dev/ttyLU2 LinkUp Systems L72xx UART - port 2
2683 3 = /dev/ttyLU3 LinkUp Systems L72xx UART - port 3
2688 8 = /dev/ttySC0 SCI serial port (SuperH) - port 0
2689 9 = /dev/ttySC1 SCI serial port (SuperH) - port 1
2690 10 = /dev/ttySC2 SCI serial port (SuperH) - port 2
2691 11 = /dev/ttySC3 SCI serial port (SuperH) - port 3
2692 12 = /dev/ttyFW0 Firmware console - port 0
2693 13 = /dev/ttyFW1 Firmware console - port 1
2694 14 = /dev/ttyFW2 Firmware console - port 2
2695 15 = /dev/ttyFW3 Firmware console - port 3
2703 41 = /dev/ttySMX0 Motorola i.MX - port 0
2704 42 = /dev/ttySMX1 Motorola i.MX - port 1
2705 43 = /dev/ttySMX2 Motorola i.MX - port 2
2706 44 = /dev/ttyMM0 Marvell MPSC - port 0 (obsolete unused)
2707 45 = /dev/ttyMM1 Marvell MPSC - port 1 (obsolete unused)
2708 46 = /dev/ttyCPM0 PPC CPM (SCC or SMC) - port 0
2710 47 = /dev/ttyCPM5 PPC CPM (SCC or SMC) - port 5
2722 148 = /dev/ttyPSC0 PPC PSC - port 0
2724 153 = /dev/ttyPSC5 PPC PSC - port 5
2732 187 = /dev/ttyUL0 Xilinx uartlite - port 0
2734 190 = /dev/ttyUL3 Xilinx uartlite - port 3
2735 191 = /dev/xvc0 Xen virtual console - port 0
2736 192 = /dev/ttyPZ0 pmac_zilog - port 0
2738 195 = /dev/ttyPZ3 pmac_zilog - port 3
2751 205 char Low-density serial ports (alternate device)
2787 206 char OnStream SC-x0 tape devices
2813 The OnStream SC-x0 SCSI tapes do not support the
2815 their own driver "osst". Note that the IDE, USB (and
2816 maybe ParPort) versions may be driven via ide-scsi or
2817 usb-storage SCSI emulation and this osst device and
2818 driver as well. The ADR-x0 drives are QIC-157
2884 8 = /dev/dvb/adapter0/osd0 first on-screen-display device of first card
2908 219 char The Logical Company DCI-1300 digital I/O card
2909 0 = /dev/logicalco/dci1300/0 First DCI-1300 card
2910 1 = /dev/logicalco/dci1300/1 Second DCI-1300 card
2955 228 char IBM 3270 terminal block-mode access
3033 234-254 char RESERVED FOR DYNAMIC ASSIGNMENT
3037 240-254 block LOCAL/EXPERIMENTAL USE
3052 ---LARGE MAJORS!!!!!---
3054 256 char Equinox SST multi-port serial boards
3080 258 block ROM/Flash read-only translation layer
3093 260 char OSD (Object-based-device) SCSI Device
3099 384-511 char RESERVED FOR DYNAMIC ASSIGNMENT
3102 once the 234-254 range is full.