Lines Matching +full:ide +full:- +full:port
1 0 Unnamed devices (e.g. non-device mounts)
9 4 = /dev/port I/O port access
11 6 = /dev/core OBSOLETE - replaced by /proc/kcore
18 12 = /dev/oldmem OBSOLETE - replaced by /proc/vmcore
31 2 char Pseudo-TTY masters
37 Pseudo-tty's are named as follows:
40 the 1st through 16th series of 16 pseudo-ttys each, and
44 These are the old-style (BSD) PTY devices; Unix98
106 3 char Pseudo-TTY slaves
112 These are the old-style (BSD) PTY devices; Unix98
115 3 block First MFM, RLL and IDE hard disk/CD-ROM interface
116 0 = /dev/hda Master: whole disk (or CD-ROM)
117 64 = /dev/hdb Slave: whole disk (or CD-ROM)
126 For Linux/i386, partitions 1-4 are the primary
137 64 = /dev/ttyS0 First UART serial port
139 255 = /dev/ttyS191 192nd UART serial port
149 because the root filesystem is mounted read-only.
200 8 block SCSI disk devices (0-15)
207 Partitions are handled in the same way as for IDE
250 10 char Non-serial mice, misc features
252 1 = /dev/psaux PS/2-style mouse port
255 4 = /dev/jbm J-mouse
261 9 = /dev/pc110pad IBM PC-110 digitizer pad
269 130 = /dev/watchdog Watchdog timer port
278 141 = /dev/relay16 Berkshire Products ISO-16 relay card
281 144 = /dev/nvram Non-volatile configuration RAM
298 161 = /dev/userdma User-space DMA access
316 179 = /dev/xsvc High-speed shared-mem/semaphore service
319 182 = /dev/perfctr Performance-monitoring counters
325 189 = /dev/ussp_ctl User space serial port control
329 193 = /dev/d7s SPARC 7-segment display
330 194 = /dev/zkshim Zero-Knowledge network shim control
331 195 = /dev/elographics/e2201 Elographics touchscreen E271-2201
333 197 = /dev/pxa3xx-gcu PXA3xx graphics controller unit driver
337 201 = /dev/button/gulpb Transmeta GULP-B buttons
339 203 = /dev/cuse Cuse (character device in user-space)
354 218 = /dev/kchuid Inter-process chuid control
365 229 = /dev/fuse Fuse (virtual filesystem in user-space)
368 232 = /dev/kvm Kernel-based virtual machine (hardware virtualization extensions)
369 233 = /dev/kmview View-OS A process with a view
370 234 = /dev/btrfs-control Btrfs control device
372 236 = /dev/mapper/control Device-Mapper control device
373 237 = /dev/loop-control Loopback control device
374 238 = /dev/vhost-net Host kernel accelerator for virtio net
375 239 = /dev/uhid User-space I/O driver support for HID subsystem
377 241 = /dev/vhost-vsock Host kernel driver for virtio vsock
380 243-254 Reserved for local use
386 11 char Serial Mux device (Linux/PA-RISC only)
387 0 = /dev/ttyB0 First mux port
388 1 = /dev/ttyB1 Second mux port
391 11 block SCSI CD-ROM devices
392 0 = /dev/scd0 First SCSI CD-ROM
393 1 = /dev/scd1 Second SCSI CD-ROM
398 12 char QIC-02 tape
399 2 = /dev/ntpqic11 QIC-11, no rewind-on-close
400 3 = /dev/tpqic11 QIC-11, rewind-on-close
401 4 = /dev/ntpqic24 QIC-24, no rewind-on-close
402 5 = /dev/tpqic24 QIC-24, rewind-on-close
403 6 = /dev/ntpqic120 QIC-120, no rewind-on-close
404 7 = /dev/tpqic120 QIC-120, rewind-on-close
405 8 = /dev/ntpqic150 QIC-150, no rewind-on-close
406 9 = /dev/tpqic150 QIC-150, rewind-on-close
408 The device names specified are proposed -- if there
433 2 = /dev/midi00 First MIDI port
435 4 = /dev/audio Sun-compatible digital audio
438 8 = /dev/sequencer2 Sequencer -- alternate device
441 18 = /dev/midi01 Second MIDI port
445 34 = /dev/midi02 Third MIDI port
446 50 = /dev/midi03 Fourth MIDI port
457 15 block Sony CDU-31A/CDU-33A CD-ROM
458 0 = /dev/sonycd Sony CDU-31a CD-ROM
460 16 char Non-SCSI scanners
463 16 block GoldStar CD-ROM
464 0 = /dev/gscd GoldStar CD-ROM
467 0 = /dev/ttyH0 First Chase port
468 1 = /dev/ttyH1 Second Chase port
470 17 block Optics Storage CD-ROM
471 0 = /dev/optcd Optics Storage CD-ROM
473 18 char OBSOLETE (was Chase serial card - alternate devices)
477 18 block Sanyo CD-ROM
478 0 = /dev/sjcd Sanyo CD-ROM
481 0 = /dev/ttyC0 First Cyclades port
483 31 = /dev/ttyC31 32nd Cyclades port
496 20 char Cyclades serial card - alternate devices
501 20 block Hitachi CD-ROM (under development)
502 0 = /dev/hitcd Hitachi CD-ROM
512 device-naming practice.
518 This device is used on the ARM-based Acorn RiscPC.
519 Partitions are handled the same way as for IDE disks
523 0 = /dev/ttyD0 First Digiboard port
524 1 = /dev/ttyD1 Second Digiboard port
526 22 block Second IDE hard disk/CD-ROM interface
527 0 = /dev/hdc Master: whole disk (or CD-ROM)
528 64 = /dev/hdd Slave: whole disk (or CD-ROM)
533 23 char Digiboard serial card - alternate devices
537 23 block Mitsumi proprietary CD-ROM
538 0 = /dev/mcd Mitsumi CD-ROM
541 0 = /dev/ttyE0 Stallion port 0 card 0
542 1 = /dev/ttyE1 Stallion port 1 card 0
544 64 = /dev/ttyE64 Stallion port 0 card 1
545 65 = /dev/ttyE65 Stallion port 1 card 1
547 128 = /dev/ttyE128 Stallion port 0 card 2
548 129 = /dev/ttyE129 Stallion port 1 card 2
550 192 = /dev/ttyE192 Stallion port 0 card 3
551 193 = /dev/ttyE193 Stallion port 1 card 3
553 24 block Sony CDU-535 CD-ROM
554 0 = /dev/cdu535 Sony CDU-535 CD-ROM
556 25 char Stallion serial card - alternate devices
569 25 block First Matsushita (Panasonic/SoundBlaster) CD-ROM
570 0 = /dev/sbpcd0 Panasonic CD-ROM controller 0 unit 0
571 1 = /dev/sbpcd1 Panasonic CD-ROM controller 0 unit 1
572 2 = /dev/sbpcd2 Panasonic CD-ROM controller 0 unit 2
573 3 = /dev/sbpcd3 Panasonic CD-ROM controller 0 unit 3
577 26 block Second Matsushita (Panasonic/SoundBlaster) CD-ROM
578 0 = /dev/sbpcd4 Panasonic CD-ROM controller 1 unit 0
579 1 = /dev/sbpcd5 Panasonic CD-ROM controller 1 unit 1
580 2 = /dev/sbpcd6 Panasonic CD-ROM controller 1 unit 2
581 3 = /dev/sbpcd7 Panasonic CD-ROM controller 1 unit 3
583 27 char QIC-117 tape
584 0 = /dev/qft0 Unit 0, rewind-on-close
585 1 = /dev/qft1 Unit 1, rewind-on-close
586 2 = /dev/qft2 Unit 2, rewind-on-close
587 3 = /dev/qft3 Unit 3, rewind-on-close
588 4 = /dev/nqft0 Unit 0, no rewind-on-close
589 5 = /dev/nqft1 Unit 1, no rewind-on-close
590 6 = /dev/nqft2 Unit 2, no rewind-on-close
591 7 = /dev/nqft3 Unit 3, no rewind-on-close
592 16 = /dev/zqft0 Unit 0, rewind-on-close, compression
593 17 = /dev/zqft1 Unit 1, rewind-on-close, compression
594 18 = /dev/zqft2 Unit 2, rewind-on-close, compression
595 19 = /dev/zqft3 Unit 3, rewind-on-close, compression
596 20 = /dev/nzqft0 Unit 0, no rewind-on-close, compression
597 21 = /dev/nzqft1 Unit 1, no rewind-on-close, compression
598 22 = /dev/nzqft2 Unit 2, no rewind-on-close, compression
599 23 = /dev/nzqft3 Unit 3, no rewind-on-close, compression
600 32 = /dev/rawqft0 Unit 0, rewind-on-close, no file marks
601 33 = /dev/rawqft1 Unit 1, rewind-on-close, no file marks
602 34 = /dev/rawqft2 Unit 2, rewind-on-close, no file marks
603 35 = /dev/rawqft3 Unit 3, rewind-on-close, no file marks
604 36 = /dev/nrawqft0 Unit 0, no rewind-on-close, no file marks
605 37 = /dev/nrawqft1 Unit 1, no rewind-on-close, no file marks
606 38 = /dev/nrawqft2 Unit 2, no rewind-on-close, no file marks
607 39 = /dev/nrawqft3 Unit 3, no rewind-on-close, no file marks
609 27 block Third Matsushita (Panasonic/SoundBlaster) CD-ROM
610 0 = /dev/sbpcd8 Panasonic CD-ROM controller 2 unit 0
611 1 = /dev/sbpcd9 Panasonic CD-ROM controller 2 unit 1
612 2 = /dev/sbpcd10 Panasonic CD-ROM controller 2 unit 2
613 3 = /dev/sbpcd11 Panasonic CD-ROM controller 2 unit 3
615 28 char Stallion serial card - card programming
625 28 block Fourth Matsushita (Panasonic/SoundBlaster) CD-ROM
626 0 = /dev/sbpcd12 Panasonic CD-ROM controller 3 unit 0
627 1 = /dev/sbpcd13 Panasonic CD-ROM controller 3 unit 1
628 2 = /dev/sbpcd14 Panasonic CD-ROM controller 3 unit 2
629 3 = /dev/sbpcd15 Panasonic CD-ROM controller 3 unit 3
638 Partitions are handled in the same way as for IDE
648 29 block Aztech/Orchid/Okano/Wearnes CD-ROM
649 0 = /dev/aztcd Aztech CD-ROM
651 30 char iBCS-2 compatibility devices
665 Additionally, iBCS-2 requires the following links:
667 /dev/ip -> /dev/inet/ip
668 /dev/icmp -> /dev/inet/icmp
669 /dev/ggp -> /dev/inet/ggp
670 /dev/ipip -> /dev/inet/ipip
671 /dev/tcp -> /dev/inet/tcp
672 /dev/egp -> /dev/inet/egp
673 /dev/pup -> /dev/inet/pup
674 /dev/udp -> /dev/inet/udp
675 /dev/idp -> /dev/inet/idp
676 /dev/rawip -> /dev/inet/rawip
677 /dev/inet/arp -> /dev/inet/udp
678 /dev/inet/rip -> /dev/inet/udp
679 /dev/nfsd -> /dev/socksys
680 /dev/X0R -> /dev/null (? apparently not required ?)
682 30 block Philips LMS CM-205 CD-ROM
683 0 = /dev/cm205cd Philips LMS CM-205 CD-ROM
686 driver does not work with the CM-205MS CD-ROM.
688 31 char MPU-401 MIDI
689 0 = /dev/mpu401data MPU-401 data port
690 1 = /dev/mpu401stat MPU-401 status port
706 The read-write (rw) devices support back-caching
708 devices. The read-only devices (ro) support reading
712 0 = /dev/ttyX0 First Specialix port
713 1 = /dev/ttyX1 Second Specialix port
715 32 block Philips LMS CM-206 CD-ROM
716 0 = /dev/cm206cd Philips LMS CM-206 CD-ROM
718 33 char Specialix serial card - alternate devices
722 33 block Third IDE hard disk/CD-ROM interface
723 0 = /dev/hde Master: whole disk (or CD-ROM)
724 64 = /dev/hdf Slave: whole disk (or CD-ROM)
730 0 = /dev/scc0 First Z8530, first port
731 1 = /dev/scc1 First Z8530, second port
732 2 = /dev/scc2 Second Z8530, first port
733 3 = /dev/scc3 Second Z8530, second port
740 34 block Fourth IDE hard disk/CD-ROM interface
741 0 = /dev/hdg Master: whole disk (or CD-ROM)
742 64 = /dev/hdh Slave: whole disk (or CD-ROM)
748 0 = /dev/midi0 First MIDI port, kernel timed
749 1 = /dev/midi1 Second MIDI port, kernel timed
750 2 = /dev/midi2 Third MIDI port, kernel timed
751 3 = /dev/midi3 Fourth MIDI port, kernel timed
752 64 = /dev/rmidi0 First MIDI port, untimed
753 65 = /dev/rmidi1 Second MIDI port, untimed
754 66 = /dev/rmidi2 Third MIDI port, untimed
755 67 = /dev/rmidi3 Fourth MIDI port, untimed
756 128 = /dev/smpte0 First MIDI port, SMPTE timed
757 129 = /dev/smpte1 Second MIDI port, SMPTE timed
758 130 = /dev/smpte2 Third MIDI port, SMPTE timed
759 131 = /dev/smpte3 Fourth MIDI port, SMPTE timed
774 37 char IDE tape
775 0 = /dev/ht0 First IDE tape
776 1 = /dev/ht1 Second IDE tape
778 128 = /dev/nht0 First IDE tape, no rewind-on-close
779 129 = /dev/nht1 Second IDE tape, no rewind-on-close
782 Currently, only one IDE tape drive is supported.
798 39 char ML-16P experimental I/O board
799 0 = /dev/ml16pa-a0 First card, first analog channel
800 1 = /dev/ml16pa-a1 First card, second analog channel
802 15 = /dev/ml16pa-a15 First card, 16th analog channel
803 16 = /dev/ml16pa-d First card, digital lines
804 17 = /dev/ml16pa-c0 First card, first counter/timer
805 18 = /dev/ml16pa-c1 First card, second counter/timer
806 19 = /dev/ml16pa-c2 First card, third counter/timer
807 32 = /dev/ml16pb-a0 Second card, first analog channel
808 33 = /dev/ml16pb-a1 Second card, second analog channel
810 47 = /dev/ml16pb-a15 Second card, 16th analog channel
811 48 = /dev/ml16pb-d Second card, digital lines
812 49 = /dev/ml16pb-c0 Second card, first counter/timer
813 50 = /dev/ml16pb-c1 Second card, second counter/timer
814 51 = /dev/ml16pb-c2 Second card, third counter/timer
859 44 char isdn4linux virtual modem - alternate devices
871 Partitions are handled in the same way as for IDE
889 45 block Parallel port IDE disk devices
890 0 = /dev/pda First parallel port IDE disk
891 16 = /dev/pdb Second parallel port IDE disk
892 32 = /dev/pdc Third parallel port IDE disk
893 48 = /dev/pdd Fourth parallel port IDE disk
895 Partitions are handled in the same way as for IDE
900 0 = /dev/ttyR0 First Rocketport port
901 1 = /dev/ttyR1 Second Rocketport port
903 46 block Parallel port ATAPI CD-ROM devices
904 0 = /dev/pcd0 First parallel port ATAPI CD-ROM
905 1 = /dev/pcd1 Second parallel port ATAPI CD-ROM
906 2 = /dev/pcd2 Third parallel port ATAPI CD-ROM
907 3 = /dev/pcd3 Fourth parallel port ATAPI CD-ROM
909 47 char Comtrol Rocketport serial card - alternate devices
913 47 block Parallel port ATAPI disk devices
914 0 = /dev/pf0 First parallel port ATAPI disk
915 1 = /dev/pf1 Second parallel port ATAPI disk
916 2 = /dev/pf2 Third parallel port ATAPI disk
917 3 = /dev/pf3 Fourth parallel port ATAPI disk
923 0 = /dev/ttyL0 First RISCom port
924 1 = /dev/ttyL1 Second RISCom port
938 49 char SDL RISCom serial card - alternate devices
958 51 char Baycom radio modem OR Radio Tech BIM-XXX-RS232 radio modem
994 Parallel Port interface. PD is the Motorola Public
1007 0 = /dev/holter0 First Holter port
1008 1 = /dev/holter1 Second Holter port
1009 2 = /dev/holter2 Third Holter port
1013 24-hour heart monitoring equipment.
1040 56 block Fifth IDE hard disk/CD-ROM interface
1041 0 = /dev/hdi Master: whole disk (or CD-ROM)
1042 64 = /dev/hdj Slave: whole disk (or CD-ROM)
1048 0 = /dev/ttyP0 First ESP port
1049 1 = /dev/ttyP1 Second ESP port
1052 57 block Sixth IDE hard disk/CD-ROM interface
1053 0 = /dev/hdk Master: whole disk (or CD-ROM)
1054 64 = /dev/hdl Slave: whole disk (or CD-ROM)
1059 58 char Hayes ESP serial card - alternate devices
1080 NAMING CONFLICT -- PROPOSED REVISED NAME /dev/rpda0 etc
1082 60-63 char LOCAL/EXPERIMENTAL USE
1084 60-63 block LOCAL/EXPERIMENTAL USE
1128 65 block SCSI disk devices (16-31)
1135 Partitions are handled in the same way as for IDE
1144 66 block SCSI disk devices (32-47)
1151 Partitions are handled in the same way as for IDE
1160 67 block SCSI disk devices (48-63)
1167 Partitions are handled in the same way as for IDE
1181 68 block SCSI disk devices (64-79)
1188 Partitions are handled in the same way as for IDE
1195 69 block SCSI disk devices (80-95)
1202 Partitions are handled in the same way as for IDE
1215 70 block SCSI disk devices (96-111)
1222 Partitions are handled in the same way as for IDE
1227 0 = /dev/ttyF0 IntelliPort II board 0, port 0
1228 1 = /dev/ttyF1 IntelliPort II board 0, port 1
1230 63 = /dev/ttyF63 IntelliPort II board 0, port 63
1231 64 = /dev/ttyF64 IntelliPort II board 1, port 0
1232 65 = /dev/ttyF65 IntelliPort II board 1, port 1
1234 127 = /dev/ttyF127 IntelliPort II board 1, port 63
1235 128 = /dev/ttyF128 IntelliPort II board 2, port 0
1236 129 = /dev/ttyF129 IntelliPort II board 2, port 1
1238 191 = /dev/ttyF191 IntelliPort II board 2, port 63
1239 192 = /dev/ttyF192 IntelliPort II board 3, port 0
1240 193 = /dev/ttyF193 IntelliPort II board 3, port 1
1242 255 = /dev/ttyF255 IntelliPort II board 3, port 63
1244 71 block SCSI disk devices (112-127)
1251 Partitions are handled in the same way as for IDE
1255 72 char Computone IntelliPort II serial card - alternate devices
1283 73 char Computone IntelliPort II serial card - control devices
1308 Currently for Dolphin Interconnect Solutions' PCI-SCI
1322 0 = /dev/ttyW0 First IO8+ port, first card
1323 1 = /dev/ttyW1 Second IO8+ port, first card
1325 8 = /dev/ttyW8 First IO8+ port, second card
1338 76 char Specialix IO8+ serial card - alternate devices
1384 79 char PAM Software's multimodem boards - alternate devices
1408 Partitions are handled in the same way as for IDE
1436 Partitions are handled in the same way as for IDE
1454 Partitions are handled in the same way as for IDE
1471 Partitions are handled in the same way as for IDE
1476 0 = /dev/ihcp0 First Greensheet port
1477 1 = /dev/ihcp1 Second Greensheet port
1485 Partitions are handled in the same way as for IDE
1501 Partitions are handled in the same way as for IDE
1516 Partitions are handled in the same way as for IDE
1520 87 char Sony Control-A1 stereo control bus
1531 Partitions are handled in the same way as for IDE
1540 88 block Seventh IDE hard disk/CD-ROM interface
1541 0 = /dev/hdm Master: whole disk (or CD-ROM)
1542 64 = /dev/hdn Slave: whole disk (or CD-ROM)
1548 0 = /dev/i2c-0 First I2C adapter
1549 1 = /dev/i2c-1 Second I2C adapter
1552 89 block Eighth IDE hard disk/CD-ROM interface
1553 0 = /dev/hdo Master: whole disk (or CD-ROM)
1554 64 = /dev/hdp Slave: whole disk (or CD-ROM)
1566 90 block Ninth IDE hard disk/CD-ROM interface
1567 0 = /dev/hdq Master: whole disk (or CD-ROM)
1568 64 = /dev/hdr Slave: whole disk (or CD-ROM)
1573 91 char CAN-Bus devices
1574 0 = /dev/can0 First CAN-Bus controller
1575 1 = /dev/can1 Second CAN-Bus controller
1578 91 block Tenth IDE hard disk/CD-ROM interface
1579 0 = /dev/hds Master: whole disk (or CD-ROM)
1580 64 = /dev/hdt Slave: whole disk (or CD-ROM)
1592 Partitions are handled in the same way as for IDE
1624 96 char Parallel port ATAPI tape devices
1625 0 = /dev/pt0 First parallel port ATAPI tape
1626 1 = /dev/pt1 Second parallel port ATAPI tape
1638 97 char Parallel port generic ATAPI interface
1639 0 = /dev/pg0 First parallel port ATAPI device
1640 1 = /dev/pg1 Second parallel port ATAPI device
1641 2 = /dev/pg2 Third parallel port ATAPI device
1642 3 = /dev/pg3 Fourth parallel port ATAPI device
1663 98 block User-mode virtual block device
1664 0 = /dev/ubda First user-mode block device
1665 16 = /dev/ubdb Second user-mode block device
1668 Partitions are handled in the same way as for IDE
1672 This device is used by the user-mode virtual kernel port.
1675 0 = /dev/parport0 First parallel port
1676 1 = /dev/parport1 Second parallel port
1714 Partitions are handled in the same way as for IDE
1726 write to <arla-drinkers@stacken.kth.se> or see
1744 105 char Comtrol VS-1000 serial controller
1745 0 = /dev/ttyV0 First VS-1000 port
1746 1 = /dev/ttyV1 Second VS-1000 port
1759 106 char Comtrol VS-1000 serial controller - alternate devices
1760 0 = /dev/cuv0 First VS-1000 port
1761 1 = /dev/cuv1 Second VS-1000 port
1840 0 = /dev/ttyM0 First ISI port
1841 1 = /dev/ttyM1 Second ISI port
1844 There is currently a device-naming conflict between
1856 Partitions are handled in the same way as for IDE
1860 113 char ISI serial card - alternate devices
1865 113 block IBM iSeries virtual CD-ROM
1866 0 = /dev/iseries/vcda First virtual CD-ROM
1867 1 = /dev/iseries/vcdb Second virtual CD-ROM
1883 114 block IDE BIOS powered software RAID interfaces such as the
1896 Partitions are handled in the same way as for IDE
1901 0 = /dev/tipar0 Parallel cable on first parallel port
1903 7 = /dev/tipar7 Parallel cable on seventh parallel port
1905 8 = /dev/tiser0 Serial cable on first serial port
1907 15 = /dev/tiser7 Serial cable on seventh serial port
1913 115 block NetWare (NWFS) Devices (0-255)
1956 The EVMS driver uses a layered, plug-in model to provide
1991 120-127 char LOCAL/EXPERIMENTAL USE
1993 120-127 block LOCAL/EXPERIMENTAL USE
1998 128-135 char Unix98 PTY masters
2004 128 block SCSI disk devices (128-143)
2011 Partitions are handled in the same way as for IDE
2015 129 block SCSI disk devices (144-159)
2022 Partitions are handled in the same way as for IDE
2028 130 block SCSI disk devices (160-175)
2035 Partitions are handled in the same way as for IDE
2039 131 block SCSI disk devices (176-191)
2046 Partitions are handled in the same way as for IDE
2050 132 block SCSI disk devices (192-207)
2057 Partitions are handled in the same way as for IDE
2061 133 block SCSI disk devices (208-223)
2068 Partitions are handled in the same way as for IDE
2072 134 block SCSI disk devices (224-239)
2079 Partitions are handled in the same way as for IDE
2083 135 block SCSI disk devices (240-255)
2090 Partitions are handled in the same way as for IDE
2094 136-143 char Unix98 PTY slaves
2095 0 = /dev/pts/0 First Unix98 pseudo-TTY
2096 1 = /dev/pts/1 Second Unix98 pseudo-TTY
2177 The SST 5136-DN DeviceNet interface driver has been
2180 144 block Expansion Area #1 for more non-device (e.g. NFS) mounts
2184 145 char SAM9407-based soundcard
2205 145 block Expansion Area #2 for more non-device (e.g. NFS) mounts
2209 146 char SYSTRAM SCRAMNet mirrored-memory network
2214 146 block Expansion Area #3 for more non-device (e.g. NFS) mounts
2229 0 = /dev/ttyT0 First TCL port
2230 1 = /dev/ttyT1 Second TCL port
2233 149 char Technology Concepts serial card - alternate devices
2238 150 char Real-Time Linux FIFOs
2276 Partitions are handled in the same way as for IDE
2281 0 = /dev/ttySR0 First RIO port
2283 255 = /dev/ttySR255 256th RIO port
2285 155 char Specialix RIO serial card - alternate devices
2291 0 = /dev/ttySR256 257th RIO port
2293 255 = /dev/ttySR511 512th RIO port
2295 157 char Specialix RIO serial card - alternate devices
2314 160 block Carmel 8-port SATA Disks on First Controller
2325 Partitions are handled in the same way as for IDE
2337 161 block Carmel 8-port SATA Disks on Second Controller
2348 Partitions are handled in the same way as for IDE
2362 164 char Chase Research AT/PCI-Fast serial card
2363 0 = /dev/ttyCH0 AT/PCI-Fast board 0, port 0
2365 15 = /dev/ttyCH15 AT/PCI-Fast board 0, port 15
2366 16 = /dev/ttyCH16 AT/PCI-Fast board 1, port 0
2368 31 = /dev/ttyCH31 AT/PCI-Fast board 1, port 15
2369 32 = /dev/ttyCH32 AT/PCI-Fast board 2, port 0
2371 47 = /dev/ttyCH47 AT/PCI-Fast board 2, port 15
2372 48 = /dev/ttyCH48 AT/PCI-Fast board 3, port 0
2374 63 = /dev/ttyCH63 AT/PCI-Fast board 3, port 15
2376 165 char Chase Research AT/PCI-Fast serial card - alternate devices
2386 167 char ACM USB modems - alternate devices
2397 0 = /dev/ecsa8-0 First CSA8000
2398 1 = /dev/ecsa8-1 Second CSA8000
2409 0 = /dev/ttyMX0 First Moxa port
2410 1 = /dev/ttyMX1 Second Moxa port
2412 127 = /dev/ttyMX127 128th Moxa port
2413 128 = /dev/moxactl Moxa control port
2415 173 char Moxa Intellio serial card - alternate devices
2422 0 = /dev/ttySI0 First SmartIO port
2423 1 = /dev/ttySI1 Second SmartIO port
2426 175 char SmartIO serial card - alternate devices
2464 179 char CCube DVXChip-based PCI products
2509 181 char Conrad Electronic parallel port radio clocks
2519 183 char SST 5136-DN DeviceNet interface
2538 http://inter-mezzo.org/index.html
2540 186 char Object-based storage control device
2557 189 char USB serial converters - alternate devices
2575 193 char Kernel event-tracing interface
2609 49 = /dev/tor/49 First pseudo-channel
2610 50 = /dev/tor/50 Second pseudo-channel
2658 202 char CPU model-specific registers
2670 Partitions are handled in the same way as for IDE
2679 204 char Low-density serial ports
2680 0 = /dev/ttyLU0 LinkUp Systems L72xx UART - port 0
2681 1 = /dev/ttyLU1 LinkUp Systems L72xx UART - port 1
2682 2 = /dev/ttyLU2 LinkUp Systems L72xx UART - port 2
2683 3 = /dev/ttyLU3 LinkUp Systems L72xx UART - port 3
2685 5 = /dev/ttySA0 StrongARM builtin serial port 0
2686 6 = /dev/ttySA1 StrongARM builtin serial port 1
2687 7 = /dev/ttySA2 StrongARM builtin serial port 2
2688 8 = /dev/ttySC0 SCI serial port (SuperH) - port 0
2689 9 = /dev/ttySC1 SCI serial port (SuperH) - port 1
2690 10 = /dev/ttySC2 SCI serial port (SuperH) - port 2
2691 11 = /dev/ttySC3 SCI serial port (SuperH) - port 3
2692 12 = /dev/ttyFW0 Firmware console - port 0
2693 13 = /dev/ttyFW1 Firmware console - port 1
2694 14 = /dev/ttyFW2 Firmware console - port 2
2695 15 = /dev/ttyFW3 Firmware console - port 3
2696 16 = /dev/ttyAM0 ARM "AMBA" serial port 0
2698 31 = /dev/ttyAM15 ARM "AMBA" serial port 15
2699 32 = /dev/ttyDB0 DataBooster serial port 0
2701 39 = /dev/ttyDB7 DataBooster serial port 7
2702 40 = /dev/ttySG0 SGI Altix console port
2703 41 = /dev/ttySMX0 Motorola i.MX - port 0
2704 42 = /dev/ttySMX1 Motorola i.MX - port 1
2705 43 = /dev/ttySMX2 Motorola i.MX - port 2
2706 44 = /dev/ttyMM0 Marvell MPSC - port 0 (obsolete unused)
2707 45 = /dev/ttyMM1 Marvell MPSC - port 1 (obsolete unused)
2708 46 = /dev/ttyCPM0 PPC CPM (SCC or SMC) - port 0
2710 47 = /dev/ttyCPM5 PPC CPM (SCC or SMC) - port 5
2722 148 = /dev/ttyPSC0 PPC PSC - port 0
2724 153 = /dev/ttyPSC5 PPC PSC - port 5
2725 154 = /dev/ttyAT0 ATMEL serial port 0
2727 169 = /dev/ttyAT15 ATMEL serial port 15
2728 170 = /dev/ttyNX0 Hilscher netX serial port 0
2730 185 = /dev/ttyNX15 Hilscher netX serial port 15
2731 186 = /dev/ttyJ0 JTAG1 DCC protocol based serial port emulation
2732 187 = /dev/ttyUL0 Xilinx uartlite - port 0
2734 190 = /dev/ttyUL3 Xilinx uartlite - port 3
2735 191 = /dev/xvc0 Xen virtual console - port 0
2736 192 = /dev/ttyPZ0 pmac_zilog - port 0
2738 195 = /dev/ttyPZ3 pmac_zilog - port 3
2739 196 = /dev/ttyTX0 TX39/49 serial port 0
2741 204 = /dev/ttyTX7 TX39/49 serial port 7
2742 205 = /dev/ttySC0 SC26xx serial port 0
2743 206 = /dev/ttySC1 SC26xx serial port 1
2744 207 = /dev/ttySC2 SC26xx serial port 2
2745 208 = /dev/ttySC3 SC26xx serial port 3
2746 209 = /dev/ttyMAX0 MAX3100 serial port 0
2747 210 = /dev/ttyMAX1 MAX3100 serial port 1
2748 211 = /dev/ttyMAX2 MAX3100 serial port 2
2749 212 = /dev/ttyMAX3 MAX3100 serial port 3
2751 205 char Low-density serial ports (alternate device)
2787 206 char OnStream SC-x0 tape devices
2813 The OnStream SC-x0 SCSI tapes do not support the
2815 their own driver "osst". Note that the IDE, USB (and
2816 maybe ParPort) versions may be driven via ide-scsi or
2817 usb-storage SCSI emulation and this osst device and
2818 driver as well. The ADR-x0 drives are QIC-157
2836 0 = /dev/ttyU0 First user space serial port
2837 1 = /dev/ttyU1 Second user space serial port
2848 2 = /dev/sbei/wan00 WAN device, port 0, board 0
2849 3 = /dev/sbei/wan01 WAN device, port 1, board 0
2850 4 = /dev/sbei/wan02 WAN device, port 2, board 0
2851 5 = /dev/sbei/wan03 WAN device, port 3, board 0
2852 6 = /dev/sbei/wanc00 WAN clone device, port 0, board 0
2853 7 = /dev/sbei/wanc01 WAN clone device, port 1, board 0
2854 8 = /dev/sbei/wanc02 WAN clone device, port 2, board 0
2855 9 = /dev/sbei/wanc03 WAN clone device, port 3, board 0
2858 12 = /dev/sbei/wan10 WAN device, port 0, board 1
2859 13 = /dev/sbei/wan11 WAN device, port 1, board 1
2860 14 = /dev/sbei/wan12 WAN device, port 2, board 1
2861 15 = /dev/sbei/wan13 WAN device, port 3, board 1
2862 16 = /dev/sbei/wanc10 WAN clone device, port 0, board 1
2863 17 = /dev/sbei/wanc11 WAN clone device, port 1, board 1
2864 18 = /dev/sbei/wanc12 WAN clone device, port 2, board 1
2865 19 = /dev/sbei/wanc13 WAN clone device, port 3, board 1
2882 6 = /dev/dvb/adapter0/ca0 first common access port of first card
2884 8 = /dev/dvb/adapter0/osd0 first on-screen-display device of first card
2908 219 char The Logical Company DCI-1300 digital I/O card
2909 0 = /dev/logicalco/dci1300/0 First DCI-1300 card
2910 1 = /dev/logicalco/dci1300/1 Second DCI-1300 card
2936 0 = /dev/ttyY0 First A2232 port
2937 1 = /dev/ttyY1 Second A2232 port
2955 228 char IBM 3270 terminal block-mode access
2962 0 = /dev/hvc0 First console port
2963 1 = /dev/hvc1 Second console port
3033 234-254 char RESERVED FOR DYNAMIC ASSIGNMENT
3037 240-254 block LOCAL/EXPERIMENTAL USE
3052 ---LARGE MAJORS!!!!!---
3054 256 char Equinox SST multi-port serial boards
3055 0 = /dev/ttyEQ0 First serial port on first Equinox SST board
3056 127 = /dev/ttyEQ127 Last serial port on first Equinox SST board
3057 128 = /dev/ttyEQ128 First serial port on second Equinox SST board
3059 1027 = /dev/ttyEQ1027 Last serial port on eighth Equinox SST board
3080 258 block ROM/Flash read-only translation layer
3093 260 char OSD (Object-based-device) SCSI Device
3099 384-511 char RESERVED FOR DYNAMIC ASSIGNMENT
3102 once the 234-254 range is full.