Lines Matching +full:suspend +full:- +full:to +full:- +full:disk

17 		power to the system (assuming no error prevents it).
20 		supplying power to the system (unless some non-Linux
27 		or microamps to determine configured regulator output levels.
38 			- off
39 			- on
40 			- error
41 			- fast
42 			- normal
43 			- idle
44 			- standby
46 		"off" means the regulator is not supplying power to the
49 		"on" means the regulator is supplying power to the system,
52 		"error" indicates an out-of-regulation status such as being
53 		disabled due to thermal shutdown, or voltage being unstable
61 		not limited to control inputs from Linux.  For example,
77 		- 'voltage'
78 		- 'current'
79 		- 'unknown'
98 		measured in microvolts (i.e. E-6 Volts), for regulators
101 		NOTE: This value should not be used to determine the regulator
113 		setting measured in microamps (i.e. E-6 Amps), for regulators
116 		NOTE: This value should not be used to determine the regulator
132 		- 'fast'
133 		- 'normal'
134 		- 'idle'
135 		- 'standby'
136 		- 'unknown'
140 		NOTE: This value should not be used to determine the regulator
143 		attribute may be available to determine the actual mode.
246 		This points to the parent or supply regulator if one exists.
256 		the system is suspended to memory, for voltage regulators
257 		implementing suspend voltage configuration constraints.
267 		the system is suspended to disk, for voltage regulators
268 		implementing suspend voltage configuration constraints.
278 		the system is suspended to standby, for voltage regulators
279 		implementing suspend voltage configuration constraints.
288 		setting for this domain when the system is suspended to
289 		memory, for regulators implementing suspend mode
299 		setting for this domain when the system is suspended to disk,
300 		for regulators implementing suspend mode configuration
310 		setting for this domain when the system is suspended to
311 		standby, for regulators implementing suspend mode
321 		when suspended to memory, for regulators implementing suspend
334 		when suspended to disk, for regulators implementing
335 		suspend configuration constraints.
347 		state when suspended to standby, for regulators implementing
348 		suspend configuration constraints.
363 		- 'enabled'
364 		- 'disabled'
365 		- 'unknown'