Lines Matching full:charging
61 used for discharging batteries, positive values for charging
101 used for discharging batteries, positive values for charging
136 This is normally used for the charging scenario where
139 user that the temperature is critically high, and charging has
161 This is normally used for the charging scenario where user-space
164 temperature level is high, and charging current has been
178 charging.
195 charging.
212 battery, during charging.
335 Maximum allowable charging current. Used for charge rate
356 Represents a battery percentage level, below which charging will
366 Represents a battery percentage level, above which charging will
377 Represents the type of charging currently being applied to the
379 charging speeds. "Adaptive" means that the charger uses some
395 Reports the charging current value which is used to determine
396 when the battery is considered full and charging should end.
422 Reports the charging current applied during pre-charging phase
448 Represents the charging status of the battery. Normally this
450 used to enable/disable charging to the battery.
455 "Unknown", "Charging", "Discharging",
456 "Not charging", "Full"
575 A userspace daemon can monitor the battery charging logic
595 the device will terminate fast-charge mode (charging current
610 the device will terminate fast-charge mode (charging current
623 This entry shows and sets the charging current threshold for
624 entering top-off charging mode. When charging current in fast
626 interrupt and start top-off charging mode.
641 the device will terminate top-off charge mode (charging current