Lines Matching full:lpm
131 If CONFIG_PM is set and a USB 2.0 lpm-capable device is plugged
132 in to a xHCI host which support link PM, it will perform a LPM
133 test; if the test is passed and host supports USB2 hardware LPM
134 (xHCI 1.0 feature), USB2 hardware LPM will be enabled for the
137 or disable) indicating whether or not USB2 hardware LPM is
147 If CONFIG_PM is set and a USB 3.0 lpm-capable device is plugged
150 the check is passed and the host supports USB3 hardware LPM,
151 USB3 hardware LPM will be enabled for the device and the USB
155 or not USB3 hardware LPM U1 or U2 is enabled for the device.
251 Some USB3.0 devices are not friendly to USB3 LPM. usb3_lpm_permit
252 attribute allows enabling/disabling usb3 lpm of a port. It takes
262 USB 2.0 devices may support hardware link power management (LPM)
264 tuning the timeout for L1 inactivity timer (LPM timer), e.g.
273 USB 2.0 devices that support hardware link power management (LPM)