Lines Matching refs:USB
2 # USB Host Controller Drivers
4 comment "USB Host Controller Drivers"
11 host/peripheral/OTG USB controllers.
20 tristate "xHCI HCD (USB 3.0) support"
23 The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
100 tristate "EHCI HCD (USB 2.0) support"
103 The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
105 If your USB host controller supports USB 2.0, you will likely want to
109 or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports
112 probably configure the OHCI (for NEC and some other vendors) USB Host
140 (TT) in USB 2.0 hubs. Without this, only one transfer will be
145 highspeed USB hub which is connected to a highspeed USB Host
161 tristate "EHCI support for on-chip PMC MSP71xx USB controller"
167 Enables support for the onchip USB controller on the PMC_MSP7100 Family SoC's.
176 Xilinx xps USB host controller core is EHCI compliant and has
182 tristate "Support for Freescale PPC on-chip EHCI USB controller"
186 Variation of ARC USB block used in some Freescale chips.
189 tristate "Support for Freescale i.MX on-chip EHCI USB controller"
193 Variation of ARC USB block used in some Freescale chips.
196 tristate "Support for Nuvoton NPCM7XX on-chip EHCI USB controller"
213 tristate "Support for Marvell EBU on-chip EHCI USB controller"
221 Marvell PXA/MMP USB controller" for those.
224 tristate "Support for ST SPEAr on-chip EHCI USB controller"
232 tristate "Support for ST STiHxxx on-chip EHCI USB controller"
241 tristate "Support for Atmel on-chip EHCI USB controller"
254 This driver enables support for the internal USB Host Controllers
258 bool "EHCI support for PPC USB controller on OF platform bus"
262 Enables support for the USB controller present on the PowerPC
266 bool "EHCI support for SuperH USB controller"
279 bool "EHCI support for Marvell PXA/MMP USB controller"
284 USB SPH and OTG controller. SPH is a single port host, and it can
289 on-chip EHCI USB controller" for those.
295 Enables support for the W90X900 USB controller
306 It is needed for high-speed (480Mbit/sec) USB 2.0 device
330 USB 2.0 device support. All CN6XXX based chips with USB are
339 The OXU210HP is an USB host/OTG/device controller. Enable this
343 implement OTG nor USB device controllers.
352 The ISP1160 and ISP1161 chips are USB host controllers. Enable this
374 depends on USB && HAS_DMA && HAS_IOMEM
384 tristate "MAX3421 HCD (USB-over-SPI) support"
385 depends on USB && SPI
387 The Maxim MAX3421E chip supports standard USB 2.0-compliant
395 tristate "OHCI HCD (USB 1.1) support"
399 USB 1.1 host controller hardware. It does more in hardware than Intel's
400 UHCI specification. If your USB host controller follows the OHCI spec,
402 USB controller from Intel or VIA, this is appropriate. If your host
405 right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI.
421 tristate "Support for ST SPEAr on-chip OHCI USB controller"
429 tristate "Support for ST STiHxxx on-chip OHCI USB controller"
446 tristate "Support for LPC on-chip OHCI USB controller"
455 tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller"
463 tristate "Support for Atmel on-chip OHCI USB controller"
499 Enables support for big-endian USB controllers present on the
507 Enables support for little-endian USB controllers present on the
516 tristate "OHCI support for PCI-bus USB controllers"
521 Enables support for PCI-bus plug-in USB controller cards.
535 Broadcom USB OHCI core.
543 bool "OHCI support for SuperH USB controller (DEPRECATED)"
568 It is needed for low-speed USB 1.0 device support.
591 controller. It is needed for low-speed USB 1.0 device
592 support. All CN6XXX based chips with USB are supported.
601 accessing the USB hardware in the PC (which is also called the USB
602 host controller). If your USB host controller conforms to this
626 tristate "Freescale QE USB Host Controller support"
631 This driver enables support for Freescale QE USB Host Controller
633 Full and Low Speed USB.
636 bool "Freescale QE USB Host Controller debug support"
646 The U132 adapter is a USB to CardBus adapter specifically designed
656 USB client driver that interfaces to the FTDI chip within ELAN's
657 USB-to-PCMCIA adapter, and this "u132-hcd" module is a USB host
661 This driver has been tested with a CardBus OHCI USB adapter, and
662 worked with a USB PEN Drive inserted into the first USB port of
673 The SL811HS is a single-port USB controller that supports either
705 The R8A66597 is a USB 2.0 host and peripheral controller.
717 The Renesas USBHS is a USB 2.0 host and peripheral controller.
726 tristate "Wireless USB Host Controller Interface (WHCI) driver"
727 depends on USB_PCI && USB && UWB
731 A driver for PCI-based Wireless USB Host Controllers that are
739 depends on USB && UWB
743 This driver enables you to connect Wireless USB devices to
744 your system using a Host Wire Adaptor USB dongle. This is an
746 your machine via USB (specified in WUSB1.0).
755 This driver enables support for the on-chip USB host in the
794 or embedded hosts that need to undergo USB-IF compliance testing with
799 their USB hardware designs. It is not needed for normal use. If