225 		printk(KERN_DEBUG "%s: removed pending cmd_queue entry "  in prism2_clear_cmd_queue()
234 		printk(KERN_DEBUG "%s: cmd_queue_len (%d) not zero after "  in prism2_clear_cmd_queue()
263 		printk(KERN_DEBUG "%s: driver bug - re-issuing command @%p\n",  in hfa384x_cmd_issue()
277 		printk(KERN_DEBUG "%s: hfa384x_cmd_issue: cmd reg was busy "  in hfa384x_cmd_issue()
285 		printk(KERN_DEBUG "%s: hfa384x_cmd_issue - timeout - "  in hfa384x_cmd_issue()
328 		printk(KERN_DEBUG "%s: hfa384x_cmd called from interrupt "  in hfa384x_cmd()
334 		printk(KERN_DEBUG "%s: hfa384x_cmd: cmd_queue full\n",  in hfa384x_cmd()
422 		printk(KERN_DEBUG "%s: hfa384x_cmd: entry still in list? "  in hfa384x_cmd()
431 		printk(KERN_DEBUG "%s: hfa384x_cmd: interrupted; err=%d\n",  in hfa384x_cmd()
439 		printk(KERN_DEBUG "%s: hfa384x_cmd: command was not "  in hfa384x_cmd()
460 		printk(KERN_DEBUG "%s: CMD=0x%04x => res=0x%02x, "  in hfa384x_cmd()
503 		printk(KERN_DEBUG "%s: hfa384x_cmd: cmd_queue full\n",  in hfa384x_cmd_callback()
563 		printk(KERN_DEBUG "%s: __hfa384x_cmd_no_wait(%d) - timeout - "  in __hfa384x_cmd_no_wait()
605                 printk(KERN_DEBUG "%s: hfa384x_cmd_wait - timeout2 - "  in hfa384x_cmd_wait()
615 		printk(KERN_DEBUG "%s: CMD=0x%04x => res=0x%02x\n",  in hfa384x_cmd_wait()
667 			printk(KERN_DEBUG "%s: Command completion event, but "  in prism2_cmd_ev()
677 		printk(KERN_DEBUG "%s: Command completion event, but no "  in prism2_cmd_ev()
697 		printk(KERN_DEBUG "%s: Invalid command completion type %d\n",  in prism2_cmd_ev()
763 		printk(KERN_DEBUG "%s: hfa384x_setup_bap - timeout before\n",  in hfa384x_setup_bap()
774 		printk(KERN_DEBUG "%s: hfa384x_setup_bap - timeout after\n",  in hfa384x_setup_bap()
782 		printk(KERN_DEBUG "%s: hfa384x_setup_bap - offset error "  in hfa384x_setup_bap()
806 		printk(KERN_DEBUG "%s: cannot get RID %04x (len=%d) - no PRI "  in hfa384x_get_rid()
822 		printk(KERN_DEBUG "%s: hfa384x_get_rid: CMDCODE_ACCESS failed "  in hfa384x_get_rid()
847 		printk(KERN_DEBUG "%s: hfa384x_get_rid - RID len mismatch: "  in hfa384x_get_rid()
861 			printk(KERN_DEBUG "%s: hfa384x_get_rid (rid=%04x, "  in hfa384x_get_rid()
884 		printk(KERN_DEBUG "%s: cannot set RID %04x (len=%d) - no PRI "  in hfa384x_set_rid()
911 		printk(KERN_DEBUG "%s: hfa384x_set_rid (rid=%04x, len=%d) - "  in hfa384x_set_rid()
921 		printk(KERN_DEBUG "%s: hfa384x_set_rid: CMDCODE_ACCESS_WRITE "  in hfa384x_set_rid()
977 		printk(KERN_DEBUG "%s: cannot allocate fid, len=%d\n",  in hfa384x_allocate_fid()
1013 		printk(KERN_DEBUG "%s: reset port failed to disable port\n",  in prism2_reset_port()
1019 			printk(KERN_DEBUG "%s: reset port failed to enable "  in prism2_reset_port()
1029 		printk(KERN_DEBUG "%s: failed to restore fragmentation "  in prism2_reset_port()
1056 		printk(KERN_DEBUG "Could not get RID for component %s\n", txt);  in prism2_get_version_info()
1315 		printk(KERN_DEBUG "%s: init command completed too quickly - "  in prism2_hw_init()
1327 		printk(KERN_DEBUG "%s: assuming no Primary image in "  in prism2_hw_init()
1338 	printk(KERN_DEBUG "prism2_hw_init: initialized in %lu ms\n",  in prism2_hw_init()
1383 			printk(KERN_DEBUG "%s: Failed to read STA f/w version "  in prism2_hw_init2()
1403 				printk(KERN_DEBUG "%s: Using shorter TX FID "  in prism2_hw_init2()
1531 		printk(KERN_DEBUG "%s: card already removed or not configured "  in prism2_hw_shutdown()
1568 		printk(KERN_DEBUG "%s: driver bug - prism2_hw_reset() called "  in prism2_hw_reset()
1609 		printk(KERN_DEBUG "%s: persistent download of primary "  in prism2_hw_reset()
1617 		printk(KERN_DEBUG "%s: persistent download of secondary "  in prism2_hw_reset()
1641 	printk(KERN_DEBUG "%s: scheduled card reset\n", local->dev->name);  in handle_reset_queue()
1697 		printk(KERN_DEBUG "%s: prism2_transmit_cb - res=0x%02x\n",  in prism2_transmit_cb()
1703 		printk(KERN_DEBUG "%s: prism2_transmit_cb called with invalid "  in prism2_transmit_cb()
1709 		printk(KERN_DEBUG "%s: driver bug: prism2_transmit_cb called "  in prism2_transmit_cb()
1768 		printk(KERN_DEBUG "%s: driver bug - prism2_transmit() called "  in prism2_transmit()
1784 		printk(KERN_DEBUG "%s: prism2_transmit: CMDCODE_TRANSMIT "  in prism2_transmit()
1822 			printk(KERN_DEBUG "%s: prism2_tx_80211: hw not ready -"  in prism2_tx_80211()
1875 		printk(KERN_DEBUG "%s: prism2_tx_80211 - to BAP0 failed\n",  in prism2_tx_80211()
1911 		printk(KERN_DEBUG "%s: detected fid change (try=%d, reg=%04x):"  in prism2_read_fid_reg()
1943 		printk(KERN_DEBUG "prism2_rx: rxfid=0 (next 0x%04x)\n",  in prism2_rx()
1960 		printk(KERN_DEBUG "%s: copy from BAP0 failed %d\n", dev->name,  in prism2_rx()
1986 			printk(KERN_DEBUG "%s: Received frame with invalid "  in prism2_rx()
1996 		printk(KERN_DEBUG "%s: RX failed to allocate skb\n",  in prism2_rx()
2007 		printk(KERN_DEBUG "%s: RX failed to read "  in prism2_rx()
2063 		printk(KERN_DEBUG "%s: RX: len(%d) > MAX(%d)\n",  in hostap_rx_skb()
2152 	printk(KERN_DEBUG "TXFIDs:");  in prism2_alloc_ev()
2177 		printk(KERN_DEBUG "%s: TX callback - foreign frame\n",  in hostap_tx_callback()
2191 		printk(KERN_DEBUG "%s: could not find TX callback (idx %d)\n",  in hostap_tx_callback()
2200 		printk(KERN_DEBUG "%s: hostap_tx_callback failed to allocate "  in hostap_tx_callback()
2426 		printk(KERN_DEBUG "Could not get info frame (fid=0x%04x)\n",  in prism2_info()
2441 		printk(KERN_DEBUG "%s: Received info frame with invalid "  in prism2_info()
2450 		printk(KERN_DEBUG "%s: Could not allocate skb for info "  in prism2_info()
2591 			printk(KERN_DEBUG "%s: interrupt - SWSUPPORT0=%04x "  in prism2_check_magic()
2621 			printk(KERN_DEBUG "%s: Interrupt, but dev not configured\n",  in prism2_interrupt()
2633 			printk(KERN_DEBUG "%s: Interrupt, but dev not OK\n",  in prism2_interrupt()
2647 			printk(KERN_DEBUG "%s: prism2_interrupt: ev=0xffff\n",  in prism2_interrupt()
2673 				printk(KERN_DEBUG "%s: prism2_interrupt: hw "  in prism2_interrupt()
2765 		printk(KERN_DEBUG "%s: defaulting to host-based encryption as "  in prism2_check_sta_fw_version()
2781 		printk(KERN_DEBUG "%s: defaulting to bogus WDS frame as a "  in prism2_check_sta_fw_version()
2807 			printk(KERN_DEBUG "%s: passive scan detected pending "  in hostap_passive_scan()
2829 		printk(KERN_DEBUG "%s: passive scan channel %d\n",  in hostap_passive_scan()
3026 			printk(KERN_DEBUG "%s: set_tim failed (aid=%d "  in handle_set_tim_queue()