Lines Matching refs:brcmf_err
720 brcmf_err("max tries: rd_val=0x%x err=%d\n", rd_val, err); in brcmf_sdio_kso_control()
751 brcmf_err("HT Avail request error: %d\n", err); in brcmf_sdio_htclk()
759 brcmf_err("HT Avail read error: %d\n", err); in brcmf_sdio_htclk()
769 brcmf_err("Devctl error setting CA: %d\n", err); in brcmf_sdio_htclk()
802 brcmf_err("HT Avail request error: %d\n", err); in brcmf_sdio_htclk()
806 brcmf_err("HT Avail timeout (%d): clkctl 0x%02x\n", in brcmf_sdio_htclk()
818 brcmf_err("HT Clock should be on\n"); in brcmf_sdio_htclk()
839 brcmf_err("Failed access turning clock off: %d\n", in brcmf_sdio_htclk()
889 brcmf_err("request for %d -> %d\n", in brcmf_sdio_clkctl()
940 brcmf_err("error while changing bus sleep state %d\n", in brcmf_sdio_bus_sleep()
1000 brcmf_err("invalid sdpcm_shared address 0x%08X\n", addr); in brcmf_sdio_readshared()
1025 brcmf_err("sdpcm shared version unsupported: dhd %d dongle %d\n", in brcmf_sdio_readshared()
1033 brcmf_err("unable to obtain sdpcm_shared info: rv=%d (addr=0x%x)\n", in brcmf_sdio_readshared()
1076 brcmf_err("mailbox indicates firmware halted\n"); in brcmf_sdio_hostmail()
1085 brcmf_err("unexpected NAKHANDLED!\n"); in brcmf_sdio_hostmail()
1099 brcmf_err("Version mismatch, dongle reports %d, " in brcmf_sdio_hostmail()
1139 brcmf_err("Unknown mailbox data content: 0x%02x\n", in brcmf_sdio_hostmail()
1154 brcmf_err("%sterminate frame%s\n", in brcmf_sdio_rxfail()
1177 brcmf_err("count growing: last 0x%04x now 0x%04x\n", in brcmf_sdio_rxfail()
1184 brcmf_err("count never zeroed: last 0x%04x\n", lastrbc); in brcmf_sdio_rxfail()
1208 brcmf_err("sdio error, abort command and terminate frame\n"); in brcmf_sdio_txfail()
1333 brcmf_err("HW header checksum error\n"); in brcmf_sdio_hdparse()
1339 brcmf_err("HW header length error\n"); in brcmf_sdio_hdparse()
1344 brcmf_err("HW superframe header length error\n"); in brcmf_sdio_hdparse()
1348 brcmf_err("HW subframe header length error\n"); in brcmf_sdio_hdparse()
1357 brcmf_err("Glom descriptor found in superframe head\n"); in brcmf_sdio_hdparse()
1365 brcmf_err("HW header length too long\n"); in brcmf_sdio_hdparse()
1372 brcmf_err("Wrong channel for superframe\n"); in brcmf_sdio_hdparse()
1378 brcmf_err("Wrong channel for subframe\n"); in brcmf_sdio_hdparse()
1384 brcmf_err("seq %d: bad data offset\n", rx_seq); in brcmf_sdio_hdparse()
1402 brcmf_err("seq %d: next length error\n", rx_seq); in brcmf_sdio_hdparse()
1417 brcmf_err("seq %d: max tx seq number error\n", rx_seq); in brcmf_sdio_hdparse()
1482 brcmf_err("bad glomd len(%d), ignore descriptor\n", in brcmf_sdio_rxglom()
1494 brcmf_err("descriptor len %d bad: %d\n", in brcmf_sdio_rxglom()
1500 brcmf_err("sublen %d not multiple of %d\n", in brcmf_sdio_rxglom()
1516 brcmf_err("bcm_pkt_buf_get_skb failed, num %d len %d\n", in brcmf_sdio_rxglom()
1575 brcmf_err("glom read of %d bytes failed: %d\n", in brcmf_sdio_rxglom()
1737 brcmf_err("%d-byte control read exceeds %d-byte buffer\n", in brcmf_sdio_read_control()
1744 brcmf_err("%d-byte ctl frame (%d-byte ctl data) exceeds %d-byte limit\n", in brcmf_sdio_read_control()
1757 brcmf_err("read %d control bytes failed: %d\n", in brcmf_sdio_read_control()
1773 brcmf_err("last control frame is being processed.\n"); in brcmf_sdio_read_control()
1840 brcmf_err("RXHEADER FAILED: %d\n", in brcmf_sdio_readframes()
1884 brcmf_err("brcmu_pkt_buf_get_skb failed\n"); in brcmf_sdio_readframes()
1898 brcmf_err("read %d bytes from channel %d failed: %d\n", in brcmf_sdio_readframes()
1923 brcmf_err("frame length mismatch:read %d, should be %d\n", in brcmf_sdio_readframes()
1944 brcmf_err("readahead on control packet %d?\n", in brcmf_sdio_readframes()
1971 brcmf_err("%s: glom superframe w/o " in brcmf_sdio_readframes()
2438 brcmf_err("Failed to force clock for F2: err %d\n", in brcmf_sdio_bus_stop()
2591 brcmf_err("Dongle reports WR_OOSYNC\n"); in brcmf_sdio_dpc()
2596 brcmf_err("Dongle reports RD_OOSYNC\n"); in brcmf_sdio_dpc()
2601 brcmf_err("Dongle reports SBINT\n"); in brcmf_sdio_dpc()
2651 brcmf_err("failed backplane access over SDIO, halting operation\n"); in brcmf_sdio_dpc()
2711 brcmf_err("brcmu_pktq_pdeq_tail() failed\n"); in brcmf_sdio_prec_enq()
2718 brcmf_err("brcmu_pktq_penq() failed\n"); in brcmf_sdio_prec_enq()
2752 brcmf_err("out of bus->txq !!!\n"); in brcmf_sdio_bus_txdata()
3039 brcmf_err("assertion in dongle\n"); in brcmf_sdio_checkdied()
3042 brcmf_err("firmware trap in dongle\n"); in brcmf_sdio_checkdied()
3176 brcmf_err("resumed on timeout\n"); in brcmf_sdio_bus_rxctl()
3221 brcmf_err("error %d on reading %d membytes at 0x%08x\n", in brcmf_sdio_verifymemory()
3226 brcmf_err("Downloaded RAM image is corrupted, block offset is %d, len is %d\n", in brcmf_sdio_verifymemory()
3258 brcmf_err("error %d on writing %d membytes at 0x%08x\n", in brcmf_sdio_download_code_file()
3278 brcmf_err("error %d on writing %d nvram bytes at 0x%08x\n", in brcmf_sdio_download_nvram()
3302 brcmf_err("dongle image file download failed\n"); in brcmf_sdio_download_firmware()
3310 brcmf_err("dongle nvram file download failed\n"); in brcmf_sdio_download_firmware()
3316 brcmf_err("error getting out of ARM core reset\n"); in brcmf_sdio_download_firmware()
3335 brcmf_err("error reading SBSDIO_FUNC1_WAKEUPCTRL\n"); in brcmf_sdio_sr_init()
3342 brcmf_err("error writing SBSDIO_FUNC1_WAKEUPCTRL\n"); in brcmf_sdio_sr_init()
3352 brcmf_err("error writing SDIO_CCCR_BRCM_CARDCAP\n"); in brcmf_sdio_sr_init()
3359 brcmf_err("error writing SBSDIO_FUNC1_CHIPCLKCSR\n"); in brcmf_sdio_sr_init()
3383 brcmf_err("error reading SBSDIO_FUNC1_SLEEPCSR\n"); in brcmf_sdio_kso_init()
3393 brcmf_err("error writing SBSDIO_FUNC1_SLEEPCSR\n"); in brcmf_sdio_kso_init()
3499 brcmf_err("error %d on reading %d membytes at 0x%08x\n", in brcmf_sdio_bus_get_memdump()
3526 brcmf_err("bus is null pointer, exiting\n"); in brcmf_sdio_isr()
3536 brcmf_err("failed backplane access\n"); in brcmf_sdio_isr()
3541 brcmf_err("isr w/o interrupt configured!\n"); in brcmf_sdio_isr()
3682 brcmf_err("Invalid SDIO Drive strength for chip %s, strength=%d\n", in brcmf_sdio_drivestrengthinit()
3728 brcmf_err("error writing for HT off\n"); in brcmf_sdio_buscoreprep()
3737 brcmf_err("ChipClkCSR access: wrote 0x%02x read 0x%02x\n", in brcmf_sdio_buscoreprep()
3748 brcmf_err("timeout on ALPAV wait, clkval 0x%02x\n", in brcmf_sdio_buscoreprep()
3849 brcmf_err("ChipClkCSR access: err %d wrote 0x%02x read 0x%02x\n", in brcmf_sdio_probe_attach()
3856 brcmf_err("brcmf_chip_attach failed!\n"); in brcmf_sdio_probe_attach()
3876 brcmf_err("Failed to get device parameters\n"); in brcmf_sdio_probe_attach()
3906 brcmf_err("error enabling KSO\n"); in brcmf_sdio_probe_attach()
4088 brcmf_err("Failed to force clock for F2: err %d\n", err); in brcmf_sdio_firmware_callback()
4129 brcmf_err("intr register failed:%d\n", err); in brcmf_sdio_firmware_callback()
4147 brcmf_err("brcmf_attach failed\n"); in brcmf_sdio_firmware_callback()
4210 brcmf_err("insufficient memory to create txworkqueue\n"); in brcmf_sdio_probe()
4219 brcmf_err("brcmf_sdio_probe_attach failed\n"); in brcmf_sdio_probe()
4281 brcmf_err("async firmware request failed: %d\n", ret); in brcmf_sdio_probe()