436 struct brcmf_sdio {  struct
437 	struct brcmf_sdio_dev *sdiodev;	/* sdio device handler */  argument
456 	struct brcmf_sdio_hdrinfo cur_read;  argument
458 	bool rxskip;		/* Skip receive (awaiting NAK ACK) */
459 	bool rxpending;		/* Data frame pending in dongle */
461 	uint rxbound;		/* Rx frames to read before resched */
462 	uint txbound;		/* Tx frames to send before resched */
463 	uint txminmax;
465 	struct sk_buff *glomd;	/* Packet containing glomming descriptor */
466 	struct sk_buff_head glom; /* Packet list for glommed superframe */
468 	u8 *rxbuf;		/* Buffer for receiving control packets */
469 	uint rxblen;		/* Allocated length of rxbuf */
470 	u8 *rxctl;		/* Aligned pointer into rxbuf */
471 	u8 *rxctl_orig;		/* pointer for freeing rxctl */
472 	uint rxlen;		/* Length of valid data in buffer */
473 	spinlock_t rxctl_lock;	/* protection lock for ctrl frame resources */
475 	u8 sdpcm_ver;	/* Bus protocol reported by dongle */
477 	bool intr;		/* Use interrupts */
478 	bool poll;		/* Use polling */
479 	atomic_t ipend;		/* Device interrupt is pending */
480 	uint spurious;		/* Count of spurious interrupts */
481 	uint pollrate;		/* Ticks between device polls */
482 	uint polltick;		/* Tick counter */
485 	uint console_interval;
486 	struct brcmf_console console;	/* Console output polling support */
487 	uint console_addr;	/* Console address from shared struct */
490 	uint clkstate;		/* State of sd and backplane clock(s) */
491 	s32 idletime;		/* Control for activity timeout */
492 	s32 idlecount;		/* Activity timeout counter */
493 	s32 idleclock;		/* How to set bus driver when idle */
494 	bool rxflow_mode;	/* Rx flow control mode */
518 	struct brcmf_sdio_count sdcnt;  argument
519 	bool sr_enabled; /* SaveRestore enabled */
520 	bool sleeping;
522 	u8 tx_hdrlen;		/* sdio bus header length for tx packet */
523 	bool txglom;		/* host tx glomming enable flag */
524 	u16 head_align;		/* buffer pointer alignment */
525 	u16 sgentry_align;	/* scatter-gather buffer alignment */