585 		DBG_PRINT(ERR_DBG,  in init_shared_mem()
600 			DBG_PRINT(ERR_DBG, "Fifo %d: Invalid length (%d) - "  in init_shared_mem()
700 			DBG_PRINT(ERR_DBG, "%s: Ring%d RxD count is not a "  in init_shared_mem()
1058 		DBG_PRINT(ERR_DBG, "%s: Device is on PCI-E bus\n",  in s2io_print_pci_mode()
1093 	DBG_PRINT(ERR_DBG, "%s: Device is on %d bit %s\n",  in s2io_print_pci_mode()
1201 		DBG_PRINT(ERR_DBG, "ERROR: Setting Swapper failed\n");  in init_nic()
1633 			DBG_PRINT(ERR_DBG,  in init_nic()
1712 				DBG_PRINT(ERR_DBG, "%s: RTI init failed\n",  in init_nic()
2118 		DBG_PRINT(ERR_DBG, "TDMA is not ready!\n");  in verify_xena_quiescence()
2122 		DBG_PRINT(ERR_DBG, "RDMA is not ready!\n");  in verify_xena_quiescence()
2126 		DBG_PRINT(ERR_DBG, "PFC is not ready!\n");  in verify_xena_quiescence()
2130 		DBG_PRINT(ERR_DBG, "TMAC BUF is not empty!\n");  in verify_xena_quiescence()
2134 		DBG_PRINT(ERR_DBG, "PIC is not QUIESCENT!\n");  in verify_xena_quiescence()
2138 		DBG_PRINT(ERR_DBG, "MC_DRAM is not ready!\n");  in verify_xena_quiescence()
2142 		DBG_PRINT(ERR_DBG, "MC_QUEUES is not ready!\n");  in verify_xena_quiescence()
2146 		DBG_PRINT(ERR_DBG, "M_PLL is not locked!\n");  in verify_xena_quiescence()
2158 		DBG_PRINT(ERR_DBG, "P_PLL is not locked!\n");  in verify_xena_quiescence()
2163 		DBG_PRINT(ERR_DBG, "RC_PRC is not QUIESCENT!\n");  in verify_xena_quiescence()
2267 		DBG_PRINT(ERR_DBG, "%s: device is not ready, "  in start_nic()
2916 			DBG_PRINT(ERR_DBG, "%s: NULL skb in Rx Intr\n",  in rx_intr_handler()
3049 			DBG_PRINT(ERR_DBG, "%s: NULL skb in Tx Free Intr\n",  in tx_intr_handler()
3187 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3189 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3193 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3195 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3199 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3201 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3205 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3242 		DBG_PRINT(ERR_DBG,  in s2io_updt_xpak_counter()
3250 		DBG_PRINT(ERR_DBG, "Incorrect value at PMA address 0x0000 - "  in s2io_updt_xpak_counter()
3426 		DBG_PRINT(ERR_DBG, "%s SW_Reset failed!\n", __func__);  in s2io_reset()
3543 			DBG_PRINT(ERR_DBG, "%s: Endian settings are wrong, "  in s2io_set_swapper()
3576 			DBG_PRINT(ERR_DBG,  in s2io_set_swapper()
3637 		DBG_PRINT(ERR_DBG,  in s2io_set_swapper()
3660 		DBG_PRINT(ERR_DBG, "XMSI # %d Access failed\n", i);  in wait_for_msix_trans()
3683 			DBG_PRINT(ERR_DBG, "%s: index: %d failed\n",  in restore_xmsi_data()
3705 			DBG_PRINT(ERR_DBG, "%s: index: %d failed\n",  in store_xmsi_data()
3779 		DBG_PRINT(ERR_DBG, "Enabling MSI-X failed\n");  in s2io_enable_msi_x()
3824 		DBG_PRINT(ERR_DBG, "%s: PCI %s: cannot assign irq %d\n",  in s2io_test_msi()
3842 		DBG_PRINT(ERR_DBG, "%s: PCI %s: No interrupt was generated "  in s2io_test_msi()
3918 		DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",  in s2io_open()
3924 		DBG_PRINT(ERR_DBG, "Set Mac Address Failed\n");  in s2io_open()
4977 			DBG_PRINT(ERR_DBG,  in s2io_set_multicast()
5003 				DBG_PRINT(ERR_DBG,  in s2io_set_multicast()
5033 				DBG_PRINT(ERR_DBG,  in s2io_set_multicast()
5103 		DBG_PRINT(ERR_DBG,  in do_s2io_add_mc()
5154 	DBG_PRINT(ERR_DBG, "MAC address 0x%llx not found in CAM\n",  in do_s2io_delete_unicast_mc()
5246 		DBG_PRINT(ERR_DBG, "CAM full no space left for Unicast MAC\n");  in do_s2io_prog_unicast()
5710 			DBG_PRINT(ERR_DBG, "Read of VPD data failed\n");  in s2io_vpd_read()
5774 			DBG_PRINT(ERR_DBG, "Read of EEPROM failed\n");  in s2io_ethtool_geeprom()
5806 		DBG_PRINT(ERR_DBG,  in s2io_ethtool_seeprom()
5822 			DBG_PRINT(ERR_DBG,  in s2io_ethtool_seeprom()
5886 		DBG_PRINT(ERR_DBG, "Write Test level %d fails\n", 1);  in s2io_register_test()
5894 		DBG_PRINT(ERR_DBG, "Write Test level %d fails\n", 2);  in s2io_register_test()
5942 		DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x4F0. "  in s2io_eeprom_test()
5964 		DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x7F0. "  in s2io_eeprom_test()
6212 			DBG_PRINT(ERR_DBG, "%s: is not up, cannot run test\n",  in s2io_ethtool_test()
6647 			DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",  in s2io_change_mtu()
6715 				DBG_PRINT(ERR_DBG,  in s2io_set_link()
6920 		DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name);  in s2io_add_isr()
6963 					DBG_PRINT(ERR_DBG,  in s2io_add_isr()
6975 					DBG_PRINT(ERR_DBG,  in s2io_add_isr()
6979 					DBG_PRINT(ERR_DBG,  in s2io_add_isr()
6999 			DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",  in s2io_add_isr()
7072 			DBG_PRINT(ERR_DBG, "Device not Quiescent - "  in do_s2io_card_down()
7106 		DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",  in s2io_card_up()
7127 			DBG_PRINT(ERR_DBG, "%s: Out of memory in Open\n",  in s2io_card_up()
7168 		DBG_PRINT(ERR_DBG, "%s: Starting NIC failed\n", dev->name);  in s2io_card_up()
7224 		DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n", dev->name);  in s2io_restart_nic()
7227 	DBG_PRINT(ERR_DBG, "%s: was reset by Tx watchdog timer\n", dev->name);  in s2io_restart_nic()
7340 			DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%x\n",  in rx_osm_handler()
7420 					DBG_PRINT(ERR_DBG,  in rx_osm_handler()
7466 			DBG_PRINT(ERR_DBG, "%s: Link down\n", dev->name);  in s2io_link()
7474 			DBG_PRINT(ERR_DBG, "%s: Link Up\n", dev->name);  in s2io_link()
7523 		DBG_PRINT(ERR_DBG, "Requested number of tx fifos "  in s2io_verify_parm()
7531 		DBG_PRINT(ERR_DBG, "Default to %d tx fifos\n", tx_fifo_num);  in s2io_verify_parm()
7539 			DBG_PRINT(ERR_DBG,  in s2io_verify_parm()
7547 		DBG_PRINT(ERR_DBG,  in s2io_verify_parm()
7549 		DBG_PRINT(ERR_DBG, "Disabling transmit steering\n");  in s2io_verify_parm()
7554 		DBG_PRINT(ERR_DBG,  in s2io_verify_parm()
7556 		DBG_PRINT(ERR_DBG, "Default to %d rx rings\n",  in s2io_verify_parm()
7562 		DBG_PRINT(ERR_DBG, "Wrong intr_type requested. "  in s2io_verify_parm()
7570 		DBG_PRINT(ERR_DBG, "Xframe I does not support MSI_X. "  in s2io_verify_parm()
7576 		DBG_PRINT(ERR_DBG, "Requested ring mode not supported\n");  in s2io_verify_parm()
7577 		DBG_PRINT(ERR_DBG, "Defaulting to 1-buffer mode\n");  in s2io_verify_parm()
7583 			DBG_PRINT(ERR_DBG, "Requested rx ring size not "  in s2io_verify_parm()
7677 		DBG_PRINT(ERR_DBG,  in s2io_init_nic()
7686 			DBG_PRINT(ERR_DBG,  in s2io_init_nic()
7700 		DBG_PRINT(ERR_DBG, "%s: Request Regions failed - %x\n",  in s2io_init_nic()
7838 		DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", dev->name);  in s2io_init_nic()
7845 		DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem1\n",  in s2io_init_nic()
7853 		DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem2\n",  in s2io_init_nic()
7882 		DBG_PRINT(ERR_DBG, "%s: swapper settings are wrong\n",  in s2io_init_nic()
7892 			DBG_PRINT(ERR_DBG, "%s: Unsupported PCI bus mode\n",  in s2io_init_nic()
7910 			DBG_PRINT(ERR_DBG,  in s2io_init_nic()
8020 		DBG_PRINT(ERR_DBG, "Device registration failed\n");  in s2io_init_nic()
8025 	DBG_PRINT(ERR_DBG, "Copyright(c) 2002-2010 Exar Corp.\n");  in s2io_init_nic()
8026 	DBG_PRINT(ERR_DBG, "%s: Neterion %s (rev %d)\n", dev->name,  in s2io_init_nic()
8028 	DBG_PRINT(ERR_DBG, "%s: Driver version %s\n", dev->name,  in s2io_init_nic()
8030 	DBG_PRINT(ERR_DBG, "%s: MAC Address: %pM\n", dev->name, dev->dev_addr);  in s2io_init_nic()
8031 	DBG_PRINT(ERR_DBG, "Serial number: %s\n", sp->serial_num);  in s2io_init_nic()
8042 		DBG_PRINT(ERR_DBG, "%s: 1-Buffer receive mode enabled\n",  in s2io_init_nic()
8046 		DBG_PRINT(ERR_DBG, "%s: 2-Buffer receive mode enabled\n",  in s2io_init_nic()
8053 		DBG_PRINT(ERR_DBG, "%s: NAPI disabled\n", dev->name);  in s2io_init_nic()
8056 		DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name);  in s2io_init_nic()
8060 	DBG_PRINT(ERR_DBG, "%s: Using %d Tx fifo(s)\n", dev->name,  in s2io_init_nic()
8063 	DBG_PRINT(ERR_DBG, "%s: Using %d Rx ring(s)\n", dev->name,  in s2io_init_nic()
8068 		DBG_PRINT(ERR_DBG, "%s: Interrupt type INTA\n", dev->name);  in s2io_init_nic()
8071 		DBG_PRINT(ERR_DBG, "%s: Interrupt type MSI-X\n", dev->name);  in s2io_init_nic()
8080 		DBG_PRINT(ERR_DBG, "%s: Multiqueue support enabled\n",  in s2io_init_nic()
8083 		DBG_PRINT(ERR_DBG, "%s: Multiqueue support disabled\n",  in s2io_init_nic()
8088 		DBG_PRINT(ERR_DBG, "%s: No steering enabled for transmit\n",  in s2io_init_nic()
8092 		DBG_PRINT(ERR_DBG,  in s2io_init_nic()
8097 		DBG_PRINT(ERR_DBG,  in s2io_init_nic()
8102 	DBG_PRINT(ERR_DBG, "%s: Large receive offload enabled\n",  in s2io_init_nic()
8152 		DBG_PRINT(ERR_DBG, "Driver Data is NULL!!\n");  in s2io_rem_nic()
8455 		DBG_PRINT(ERR_DBG, "%s: Don't know, can't say!!\n", __func__);  in s2io_club_tcp_session()