147 			hw_dbg(hw, "I2C byte read combined error - Retry.\n");  in ixgbe_read_i2c_combined_generic_int()
149 			hw_dbg(hw, "I2C byte read combined error.\n");  in ixgbe_read_i2c_combined_generic_int()
212 			hw_dbg(hw, "I2C byte write combined error - Retry.\n");  in ixgbe_write_i2c_combined_generic_int()
214 			hw_dbg(hw, "I2C byte write combined error.\n");  in ixgbe_write_i2c_combined_generic_int()
323 		hw_dbg(hw, "MNG_VETO bit detected.\n");  in ixgbe_check_reset_blocked()
455 		hw_dbg(hw, "PHY reset polling failed to complete.\n");  in ixgbe_reset_phy_generic()
497 		hw_dbg(hw, "PHY address command did not complete.\n");  in ixgbe_read_phy_reg_mdi()
524 		hw_dbg(hw, "PHY read command didn't complete\n");  in ixgbe_read_phy_reg_mdi()
601 		hw_dbg(hw, "PHY address cmd didn't complete\n");  in ixgbe_write_phy_reg_mdi()
629 		hw_dbg(hw, "PHY write cmd didn't complete\n");  in ixgbe_write_phy_reg_mdi()
999 		hw_dbg(hw, "PHY reset did not complete.\n");  in ixgbe_reset_phy_nl()
1024 			hw_dbg(hw, "DELAY: %d MS\n", edata);  in ixgbe_reset_phy_nl()
1028 			hw_dbg(hw, "DATA:\n");  in ixgbe_reset_phy_nl()
1041 				hw_dbg(hw, "Wrote %4.4x to %4.4x\n", eword,  in ixgbe_reset_phy_nl()
1049 			hw_dbg(hw, "CONTROL:\n");  in ixgbe_reset_phy_nl()
1051 				hw_dbg(hw, "EOL\n");  in ixgbe_reset_phy_nl()
1054 				hw_dbg(hw, "SOL\n");  in ixgbe_reset_phy_nl()
1056 				hw_dbg(hw, "Bad control value\n");  in ixgbe_reset_phy_nl()
1061 			hw_dbg(hw, "Bad control type\n");  in ixgbe_reset_phy_nl()
1344 		hw_dbg(hw, "SFP+ module not supported\n");  in ixgbe_identify_sfp_module_generic()
1523 			hw_dbg(hw, "QSFP module not supported\n");  in ixgbe_identify_qsfp_module_generic()
1606 				hw_dbg(hw, "SFP+ module not supported\n");  in ixgbe_get_sfp_init_sequence_offsets()
1619 		hw_dbg(hw, "No matching SFP+ module found\n");  in ixgbe_get_sfp_init_sequence_offsets()
1775 			hw_dbg(hw, "I2C byte read error - Retrying.\n");  in ixgbe_read_i2c_byte_generic_int()
1777 			hw_dbg(hw, "I2C byte read error.\n");  in ixgbe_read_i2c_byte_generic_int()
1876 			hw_dbg(hw, "I2C byte write error - Retrying.\n");  in ixgbe_write_i2c_byte_generic_int()
1878 			hw_dbg(hw, "I2C byte write error.\n");  in ixgbe_write_i2c_byte_generic_int()
2079 		hw_dbg(hw, "I2C ack was not received.\n");  in ixgbe_get_i2c_ack()
2151 		hw_dbg(hw, "I2C data was not set to %X\n", data);  in ixgbe_clock_out_i2c_bit()
2247 		hw_dbg(hw, "Error - I2C data was not set to %X.\n", data);  in ixgbe_set_i2c_data()