120 		hw_dbg("PHY Address %d is out of range\n", offset);  in igb_read_phy_reg_mdic()
146 		hw_dbg("MDI Read did not complete\n");  in igb_read_phy_reg_mdic()
151 		hw_dbg("MDI Error\n");  in igb_read_phy_reg_mdic()
176 		hw_dbg("PHY Address %d is out of range\n", offset);  in igb_write_phy_reg_mdic()
203 		hw_dbg("MDI Write did not complete\n");  in igb_write_phy_reg_mdic()
208 		hw_dbg("MDI Error\n");  in igb_write_phy_reg_mdic()
249 		hw_dbg("I2CCMD Read did not complete\n");  in igb_read_phy_reg_i2c()
253 		hw_dbg("I2CCMD Error bit set\n");  in igb_read_phy_reg_i2c()
279 		hw_dbg("PHY I2C Address %d is out of range.\n",  in igb_write_phy_reg_i2c()
306 		hw_dbg("I2CCMD Write did not complete\n");  in igb_write_phy_reg_i2c()
310 		hw_dbg("I2CCMD Error bit set\n");  in igb_write_phy_reg_i2c()
337 		hw_dbg("I2CCMD command address exceeds upper limit\n");  in igb_read_sfp_data_byte()
358 		hw_dbg("I2CCMD Read did not complete\n");  in igb_read_sfp_data_byte()
362 		hw_dbg("I2CCMD Error bit set\n");  in igb_read_sfp_data_byte()
469 			hw_dbg("Error resetting the PHY.\n");  in igb_copper_link_setup_82580()
611 		hw_dbg("Error committing the PHY changes\n");  in igb_copper_link_setup_m88()
689 			hw_dbg("Error committing the PHY changes\n");  in igb_copper_link_setup_m88_gen2()
705 		hw_dbg("Error committing the PHY changes\n");  in igb_copper_link_setup_m88_gen2()
735 		hw_dbg("Error resetting the PHY.\n");  in igb_copper_link_setup_igp()
752 			hw_dbg("Error Disabling LPLU D3\n");  in igb_copper_link_setup_igp()
760 		hw_dbg("Error Disabling LPLU D0\n");  in igb_copper_link_setup_igp()
877 	hw_dbg("Reconfiguring auto-neg advertisement params\n");  in igb_copper_link_autoneg()
880 		hw_dbg("Error Setting up Auto-Negotiation\n");  in igb_copper_link_autoneg()
883 	hw_dbg("Restarting Auto-Neg\n");  in igb_copper_link_autoneg()
903 			hw_dbg("Error while waiting for autoneg to complete\n");  in igb_copper_link_autoneg()
962 	hw_dbg("autoneg_advertised %x\n", phy->autoneg_advertised);  in igb_phy_setup_autoneg()
966 		hw_dbg("Advertise 10mb Half duplex\n");  in igb_phy_setup_autoneg()
972 		hw_dbg("Advertise 10mb Full duplex\n");  in igb_phy_setup_autoneg()
978 		hw_dbg("Advertise 100mb Half duplex\n");  in igb_phy_setup_autoneg()
984 		hw_dbg("Advertise 100mb Full duplex\n");  in igb_phy_setup_autoneg()
990 		hw_dbg("Advertise 1000mb Half duplex request denied!\n");  in igb_phy_setup_autoneg()
994 		hw_dbg("Advertise 1000mb Full duplex\n");  in igb_phy_setup_autoneg()
1048 		hw_dbg("Flow control param set incorrectly\n");  in igb_phy_setup_autoneg()
1057 	hw_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);  in igb_phy_setup_autoneg()
1096 		hw_dbg("Forcing Speed and Duplex\n");  in igb_setup_copper_link()
1099 			hw_dbg("Error Forcing Speed and Duplex\n");  in igb_setup_copper_link()
1112 		hw_dbg("Valid link established!!!\n");  in igb_setup_copper_link()
1116 		hw_dbg("Unable to establish link!!!\n");  in igb_setup_copper_link()
1162 	hw_dbg("IGP PSCR: %X\n", phy_data);  in igb_phy_force_speed_duplex_igp()
1167 		hw_dbg("Waiting for forced speed/duplex link on IGP phy.\n");  in igb_phy_force_speed_duplex_igp()
1174 			hw_dbg("Link taking longer than expected.\n");  in igb_phy_force_speed_duplex_igp()
1219 		hw_dbg("M88E1000 PSCR: %X\n", phy_data);  in igb_phy_force_speed_duplex_m88()
1238 		hw_dbg("Waiting for forced speed/duplex link on M88 phy.\n");  in igb_phy_force_speed_duplex_m88()
1261 				hw_dbg("Link taking longer than expected.\n");  in igb_phy_force_speed_duplex_m88()
1355 		hw_dbg("Half Duplex\n");  in igb_phy_force_speed_duplex_setup()
1359 		hw_dbg("Full Duplex\n");  in igb_phy_force_speed_duplex_setup()
1367 		hw_dbg("Forcing 100mb\n");  in igb_phy_force_speed_duplex_setup()
1372 		hw_dbg("Forcing 10mb\n");  in igb_phy_force_speed_duplex_setup()
1917 		hw_dbg("Phy info is only valid for copper media\n");  in igb_get_phy_info_m88()
1927 		hw_dbg("Phy info is only valid if link is up\n");  in igb_get_phy_info_m88()
1997 		hw_dbg("Phy info is only valid if link is up\n");  in igb_get_phy_info_igp()
2123 	hw_dbg("Running IGP 3 PHY init script\n");  in igb_phy_init_script_igp3()
2272 		hw_dbg("Error committing the PHY changes\n");  in igb_initialize_M88E1512_phy()
2366 		hw_dbg("Error committing the PHY changes\n");  in igb_initialize_M88E1543_phy()
2474 	hw_dbg("I82580_PHY_CTRL_2: %X\n", phy_data);  in igb_phy_force_speed_duplex_82580()
2479 		hw_dbg("Waiting for forced speed/duplex link on 82580 phy\n");  in igb_phy_force_speed_duplex_82580()
2486 			hw_dbg("Link taking longer than expected.\n");  in igb_phy_force_speed_duplex_82580()
2519 		hw_dbg("Phy info is only valid if link is up\n");  in igb_get_phy_info_82580()