113 	hw_dbg("Programming MAC Address into RAR[0]\n");  in igb_init_rx_addrs()
118 	hw_dbg("Clearing RAR[1-%u]\n", rar_count-1);  in igb_init_rx_addrs()
302 		hw_dbg("NVM Read Error\n");  in igb_check_alt_mac_addr()
322 			hw_dbg("NVM Read Error\n");  in igb_check_alt_mac_addr()
332 		hw_dbg("Ignoring Alternate Mac Address with MC bit set\n");  in igb_check_alt_mac_addr()
630 		hw_dbg("Error configuring flow control\n");  in igb_check_for_copper_link()
671 	hw_dbg("After fix-ups FlowControl is now = %x\n", hw->fc.current_mode);  in igb_setup_link()
683 	hw_dbg("Initializing the Flow Control address, type and timer regs\n");  in igb_setup_link()
783 		hw_dbg("NVM Read Error\n");  in igb_set_default_fc()
832 	hw_dbg("hw->fc.current_mode = %u\n", hw->fc.current_mode);  in igb_force_mac_fc()
850 		hw_dbg("Flow control param set incorrectly\n");  in igb_force_mac_fc()
892 		hw_dbg("Error forcing flow control settings\n");  in igb_config_fc_after_link_up()
916 			hw_dbg("Copper PHY and Auto Neg has not completed.\n");  in igb_config_fc_after_link_up()
978 				hw_dbg("Flow Control = FULL.\n");  in igb_config_fc_after_link_up()
981 				hw_dbg("Flow Control = RX PAUSE frames only.\n");  in igb_config_fc_after_link_up()
996 			hw_dbg("Flow Control = TX PAUSE frames only.\n");  in igb_config_fc_after_link_up()
1010 			hw_dbg("Flow Control = RX PAUSE frames only.\n");  in igb_config_fc_after_link_up()
1036 			hw_dbg("Flow Control = NONE.\n");  in igb_config_fc_after_link_up()
1039 			hw_dbg("Flow Control = RX PAUSE frames only.\n");  in igb_config_fc_after_link_up()
1048 			hw_dbg("Error getting link speed and duplex\n");  in igb_config_fc_after_link_up()
1060 			hw_dbg("Error forcing flow control settings\n");  in igb_config_fc_after_link_up()
1077 			hw_dbg("PCS Auto Neg has not completed.\n");  in igb_config_fc_after_link_up()
1133 				hw_dbg("Flow Control = FULL.\n");  in igb_config_fc_after_link_up()
1136 				hw_dbg("Flow Control = Rx PAUSE frames only.\n");  in igb_config_fc_after_link_up()
1151 			hw_dbg("Flow Control = Tx PAUSE frames only.\n");  in igb_config_fc_after_link_up()
1165 			hw_dbg("Flow Control = Rx PAUSE frames only.\n");  in igb_config_fc_after_link_up()
1171 			hw_dbg("Flow Control = NONE.\n");  in igb_config_fc_after_link_up()
1183 			hw_dbg("Error forcing flow control settings\n");  in igb_config_fc_after_link_up()
1209 		hw_dbg("1000 Mbs, ");  in igb_get_speed_and_duplex_copper()
1212 		hw_dbg("100 Mbs, ");  in igb_get_speed_and_duplex_copper()
1215 		hw_dbg("10 Mbs, ");  in igb_get_speed_and_duplex_copper()
1220 		hw_dbg("Full Duplex\n");  in igb_get_speed_and_duplex_copper()
1223 		hw_dbg("Half Duplex\n");  in igb_get_speed_and_duplex_copper()
1253 		hw_dbg("Driver can't access device - SMBI bit is set.\n");  in igb_get_hw_semaphore()
1273 		hw_dbg("Driver can't access the NVM\n");  in igb_get_hw_semaphore()
1319 		hw_dbg("Auto read by HW from NVM has not completed.\n");  in igb_get_auto_rd_done()
1342 		hw_dbg("NVM Read Error\n");  in igb_valid_led_default()
1542 		hw_dbg("Master requests are pending.\n");  in igb_disable_pcie_master()
1567 		hw_dbg("Invalid MDI setting detected\n");  in igb_validate_mdi_setting()
1606 		hw_dbg("Reg %08x did not indicate ready\n", reg);  in igb_write_8bit_ctrl_reg()