Lines Matching refs:here
7 Say Y here, and a list of supported touchscreens will be displayed.
22 Say Y here if you have a 88PM860x PMIC and want to enable
27 To compile this driver as a module, choose M here: the
35 Say Y here if you have a touchscreen interface using the
46 To compile this driver as a module, choose M here: the
53 Say Y here if you have a touchscreen interface using the
59 To compile this driver as a module, choose M here: the
65 Say Y here if you want to support a touchscreen interface using
70 To compile this driver as a module, choose M here: the
78 Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
80 To compile this driver as a module, choose M here: the
88 Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
92 To compile this driver as a module, choose M here: the
100 Say Y here if you want to use the generic ADC
105 To compile this driver as a module, choose M here: the
112 Say Y here if you have the Microchip AR1020 or AR1021 touchscreen
117 To compile this driver as a module, choose M here: the
125 Say Y here if you have Atmel mXT series I2C touchscreen,
130 To compile this driver as a module, choose M here: the
139 Say Y here if you want support to output data from the T37
147 Say Y here if you have a AUO display with in-cell touchscreen
152 To compile this driver as a module, choose M here: the
159 Say Y here if you have a bu21013 touchscreen connected to
164 To compile this driver as a module, choose M here: the
171 Say Y here if you have a Rohm BU21029 touchscreen controller
176 To compile this driver as a module, choose M here: the
185 Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
189 To compile this driver as a module, choose M here: the
196 Say Y here if you have a ChipOne icn8505 based I2C touchscreen.
200 To compile this driver as a module, choose M here: the
208 Say Y here if you have a cy8ctmg110 capacitive touchscreen on
213 To compile this driver as a module, choose M here: the
219 Say Y here if you have a touchscreen using controller from
226 To compile this driver as a module, choose M here: the
233 Say Y here if the touchscreen is connected via I2C bus.
235 To compile this driver as a module, choose M here: the
242 Say Y here if the touchscreen is connected via SPI bus.
244 To compile this driver as a module, choose M here: the
253 Say Y here if you have a Cypress Gen4 touchscreen.
257 To compile this driver as a module, choose M here.
263 Say Y here if the touchscreen is connected via I2C bus.
265 To compile this driver as a module, choose M here: the
272 Say Y here if the touchscreen is connected via SPI bus.
274 To compile this driver as a module, choose M here: the
282 Say Y here to enable the support for the touchscreen found
287 To compile this driver as a module, choose M here: the
294 Say Y here to support the touchscreen found on Dialog Semiconductor
299 To compile this driver as a module, choose M here: the
306 Say Y here if you have a Dynapro serial touchscreen connected to
311 To compile this driver as a module, choose M here: the
318 Say Y here if you have a Hampshire serial touchscreen connected to
323 To compile this driver as a module, choose M here: the
330 Say Y here to enable support for I2C connected EETI touch panels.
332 To compile this driver as a module, choose M here: the
339 Say Y here to enable support for I2C connected EETI
342 To compile this driver as a module, choose M here: the
349 Say Y here to enable support for serial connected EETI
352 To compile this driver as a module, choose M here: the
359 Say Y here to enable support for I2C connected EETI
362 To compile this driver as a module, choose M here: the
369 Say Y here if you have the Fujitsu touchscreen (such as one
375 To compile this driver as a module, choose M here: the
383 Say Y here if you have the Goodix touchscreen (such as one
390 To compile this driver as a module, choose M here: the
397 Say Y here if you have a touchscreen using HiDeep.
401 To compile this driver as a module, choose M here : the
408 Say Y here if you have a ILI210X based touchscreen
416 To compile this driver as a module, choose M here: the
423 Say Y here if you want to add support for the IPROC touch
428 To compile this driver as a module, choose M here: the
436 Say Y here if you have the s3c2410 touchscreen.
440 To compile this driver as a module, choose M here: the
451 To compile this driver as module, choose M here: the
458 Say Y here if you have the Gunze AHL-51 touchscreen connected to
463 To compile this driver as a module, choose M here: the
470 Say Y here if you have an Elan eKTF2127 touchscreen
475 To compile this driver as a module, choose M here: the
482 Say Y here if you have an Elan eKTH I2C touchscreen
487 To compile this driver as a module, choose M here: the
494 Say Y here if you have an Elo serial touchscreen connected to
499 To compile this driver as a module, choose M here: the
506 Say Y here if you have an Wacom W8001 penabled serial touchscreen
511 To compile this driver as a module, choose M here: the
518 Say Y here if you want to use the I2C version of the Wacom
523 To compile this driver as a module, choose M here: the module
530 Say Y here if you have a LPC32XX device and want
533 To compile this driver as a module, choose M here: the
540 Say Y here if you have a MAX11801 based touchscreen
545 To compile this driver as a module, choose M here: the
552 Say Y here if you have the MELFAS MCS-5000 touchscreen controller
557 To compile this driver as a module, choose M here: the
564 Say Y here if you have the MELFAS MMS114 touchscreen controller
569 To compile this driver as a module, choose M here: the
576 Say Y here if you have a MELFAS MIP4 Touchscreen device.
580 To compile this driver as a module, choose M here:
587 Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
592 To compile this driver as a module, choose M here: the
599 Say Y here if you have a Freescale i.MX6UL, and want to
604 To compile this driver as a module, choose M here: the
611 Say Y here if you have an iNexio serial touchscreen connected to
616 To compile this driver as a module, choose M here: the
622 Say Y here if you have the ICS MicroClock MK712 touchscreen
627 To compile this driver as a module, choose M here: the
634 Say Y here if you have a HP Jornada 620/660/680/690 and want to
637 To compile this driver as a module, choose M here: the
644 Say Y here if you have a HP Jornada 710/720/728 and want
647 To compile this driver as a module, choose M here: the
654 Say Y here to enable support for the touchscreen attached to
659 To compile this driver as a module, choose M here: the
666 Say Y here if you have an HTC Shift UMPC also known as HTC X9500
671 To compile this driver as a module, choose M here: the
678 Say Y here if you have a Penmount serial touchscreen connected to
683 To compile this driver as a module, choose M here: the
690 Say Y here if you have an EDT "Polytouch" touchscreen based
696 To compile this driver as a module, choose M here: the
703 Say Y here to enable MIGO-R touchscreen support.
707 To compile this driver as a module, choose M here: the
714 Say Y here if you have a Touchright serial touchscreen connected to
719 To compile this driver as a module, choose M here: the
726 Say Y here if you have a Touchwin serial touchscreen connected to
731 To compile this driver as a module, choose M here: the
738 Say Y here if you have 4/5/8 wire touchscreen controller
743 To compile this driver as a module, choose M here: the
759 To compile this driver as a module, choose M here: the
766 Say Y here if you have a pixcir i2c touchscreen
771 To compile this driver as a module, choose M here: the
778 Say Y here if you have a Weida WDT87XX I2C touchscreen
783 To compile this driver as a module, choose M here: the
793 To compile this driver as a module, choose M here: the
800 Say Y here if you have a Wolfson Microelectronics WM97xx
807 To compile this driver as a module, choose M here: the
815 Say Y here to enable support for the Wolfson Microelectronics
823 Say Y here to enable support for the Wolfson Microelectronics
831 Say Y here to enable support for the Wolfson Microelectronics
838 Say Y here for support for streaming mode with WM97xx touchscreens
843 To compile this driver as a module, choose M here: the
851 Say Y here for support for streaming mode with the touchscreen
856 To compile this driver as a module, choose M here: the
884 To compile this driver as a module, choose M here: the
891 Say Y here if you have a touchscreen connected to the low-resolution
894 To compile this driver as a module, choose M here: the module will be
903 To compile this driver as a module, choose M here: the
910 Say Y here if you have an Freescale MC13783 PMIC on your
915 To compile this driver as a module, choose M here: the
1008 Say Y here if you have an EasyTouch USB Touch controller.
1015 Say Y here if you have a Sahara TouchIT-213 Tablet PC.
1019 To compile this driver as a module, choose M here: the
1029 Say Y here if you have a touchscreen on a TS-4800 board.
1036 To compile this driver as a module, choose M here: the
1043 Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
1048 To compile this driver as a module, choose M here: the
1060 Say Y here if you have a TSC2004 based touchscreen.
1064 To compile this driver as a module, choose M here: the
1073 Say Y here if you have a TSC2005 based touchscreen.
1077 To compile this driver as a module, choose M here: the
1084 Say Y here if you have a TSC2007 based touchscreen.
1088 To compile this driver as a module, choose M here: the
1096 Saying Y here adds an iio interface to the tsc2007 which
1105 Say Y here if you have a W90P910 based touchscreen.
1107 To compile this driver as a module, choose M here: the
1114 Say Y here if you have a Motorola EZX telephone and
1117 To compile this driver as a module, choose M here: the
1125 Say Y here if you have Raydium series I2C touchscreen,
1130 To compile this driver as a module, choose M here: the
1137 Say Y here if you have the Silead touchscreen connected to
1142 To compile this driver as a module, choose M here: the
1155 To compile this driver as a module, choose M here: the
1162 Say Y here if you want to support Sitronix ST1232
1167 To compile this driver as a module, choose M here: the
1175 Say Y here if you want support for STMicroelectronics
1178 To compile this driver as a module, choose M here: the
1186 Say Y here if you want support for STMicroelectronics
1189 To compile this driver as a module, choose M here: the
1201 To compile this driver as a module, choose M here: the
1211 Say Y here if you want support for the Samsung SUR40 touchscreen
1214 To compile this driver as a module, choose M here: the
1222 Say Y here if you have the Ntrig/Microsoft SPI touchscreen
1227 To compile this driver as a module, choose M here: the
1234 Say Y here if you have a Semtech SX8654 touchscreen controller.
1238 To compile this driver as a module, choose M here: the
1246 Say Y here if you have a TPS6507x based touchscreen
1251 To compile this driver as a module, choose M here: the
1258 Say Y here if you have a touchscreen using Zeitec ZET6223
1262 To compile this driver as a module, choose M here: the
1270 Say Y here if you have a touchscreen using the zforce
1275 To compile this driver as a module, choose M here: the
1283 Say Y here if you have a Colibri VF50 and plan to use
1288 To compile this driver as a module, choose M here: the
1295 Say Y here if you have a touchscreen using ROHM BU21023/24.
1299 To compile this driver as a module, choose M here: the