337 static inline u32 cprman_read(struct bcm2835_cprman *cprman, u32 reg)  in cprman_read()  function
367 	while (cprman_read(cprman, CM_OSCCOUNT)) {  in bcm2835_measure_tcnt_mux()
378 	while (cprman_read(cprman, CM_TCNTCTL) & CM_BUSY) {  in bcm2835_measure_tcnt_mux()
387 	count = cprman_read(cprman, CM_TCNTCNT);  in bcm2835_measure_tcnt_mux()
523 	return cprman_read(cprman, data->a2w_ctrl_reg) &  in bcm2835_pll_is_on()
573 	u32 a2wctrl = cprman_read(cprman, data->a2w_ctrl_reg);  in bcm2835_pll_get_rate()
580 	fdiv = cprman_read(cprman, data->frac_reg) & A2W_PLL_FRAC_MASK;  in bcm2835_pll_get_rate()
583 	using_prediv = cprman_read(cprman, data->ana_reg_base + 4) &  in bcm2835_pll_get_rate()
603 		     cprman_read(cprman, data->a2w_ctrl_reg) |  in bcm2835_pll_off()
616 		     cprman_read(cprman, data->a2w_ctrl_reg) &  in bcm2835_pll_on()
622 		     cprman_read(cprman, data->cm_ctrl_reg) & ~CM_PLL_ANARST);  in bcm2835_pll_on()
627 	while (!(cprman_read(cprman, CM_LOCK) & data->lock_mask)) {  in bcm2835_pll_on()
638 		     cprman_read(cprman, data->a2w_ctrl_reg) |  in bcm2835_pll_on()
682 		ana[i] = cprman_read(cprman, data->ana_reg_base + i * 4);  in bcm2835_pll_set_rate()
706 		     cprman_read(cprman, A2W_XOSC_CTRL) |  in bcm2835_pll_set_rate()
716 	a2w_ctl = cprman_read(cprman, data->a2w_ctrl_reg);  in bcm2835_pll_set_rate()
787 	return !(cprman_read(cprman, data->a2w_reg) & A2W_PLL_CHANNEL_DISABLE);  in bcm2835_pll_divider_is_on()
811 		     (cprman_read(cprman, data->cm_reg) &  in bcm2835_pll_divider_off()
814 		     cprman_read(cprman, data->a2w_reg) |  in bcm2835_pll_divider_off()
827 		     cprman_read(cprman, data->a2w_reg) &  in bcm2835_pll_divider_on()
831 		     cprman_read(cprman, data->cm_reg) & ~data->hold_mask);  in bcm2835_pll_divider_on()
853 	cm = cprman_read(cprman, data->cm_reg);  in bcm2835_pll_divider_set_rate()
913 	return (cprman_read(cprman, data->ctl_reg) & CM_ENABLE) != 0;  in bcm2835_clock_is_on()
996 	div = cprman_read(cprman, data->div_reg);  in bcm2835_clock_get_rate()
1007 	while (cprman_read(cprman, data->ctl_reg) & CM_BUSY) {  in bcm2835_clock_wait_busy()
1025 		     cprman_read(cprman, data->ctl_reg) & ~CM_ENABLE);  in bcm2835_clock_off()
1040 		     cprman_read(cprman, data->ctl_reg) |  in bcm2835_clock_on()
1078 	ctl = cprman_read(cprman, data->ctl_reg) & ~CM_FRAC;  in bcm2835_clock_set_rate()
1237 	u32 src = cprman_read(cprman, data->ctl_reg);  in bcm2835_clock_get_parent()
1432 		if (!(cprman_read(cprman, data->ctl_reg) & CM_ENABLE))  in bcm2835_register_clock()