482   PRINTD (DBG_REGS, "CONTROL 0: %#x", rd_regl (dev, CONTROL_0_REG));  in dump_regs()
483   PRINTD (DBG_REGS, "RX CONFIG: %#x", rd_regw (dev, RX_CONFIG_OFF));  in dump_regs()
484   PRINTD (DBG_REGS, "TX CONFIG: %#x", rd_regw (dev, TX_CONFIG_OFF));  in dump_regs()
485   PRINTD (DBG_REGS, "TX STATUS: %#x", rd_regw (dev, TX_STATUS_OFF));  in dump_regs()
486   PRINTD (DBG_REGS, "IRQ ENBLE: %#x", rd_regl (dev, INT_ENABLE_REG_OFF));  in dump_regs()
487   PRINTD (DBG_REGS, "IRQ SORCE: %#x", rd_regl (dev, INT_SOURCE_REG_OFF));  in dump_regs()
603 	PRINTD (DBG_QOS|DBG_FLOW, "make_rate b=%lu, c=%u, %s", br, c,  in make_rate()
608 		PRINTD (DBG_QOS|DBG_ERR, "zero rate is not allowed!");  in make_rate()
641 		PRINTD (DBG_QOS, "A: p=%u, d=%u", pre, div);  in make_rate()
665 			PRINTD (DBG_QOS, "B: p=%u, d=%u", pre, div);  in make_rate()
676 	PRINTD (DBG_QOS, "C: p=%u, d=%u", pre, div);  in make_rate()
680 		PRINTD (DBG_QOS, "set_cr internal failure: d=%u p=%u",  in make_rate()
688 			PRINTD (DBG_QOS, "actual rate: %u", *actual);  in make_rate()
698   PRINTD (DBG_QOS|DBG_FLOW, "make_rate_with_tolerance c=%u, %s, tol=%u",  in make_rate_with_tolerance()
730   PRINTD (DBG_FLOW, "hrz_open_rx %x", channel);  in hrz_open_rx()
738     PRINTD (DBG_ERR|DBG_VCC, "RX channel for VC already open");  in hrz_open_rx()
745     PRINTD (DBG_VCC, "using a spare buffer: %u", buf_ptr);  in hrz_open_rx()
749       PRINTD (DBG_ERR|DBG_VCC, "bad spare buffer pointer, using IDLE");  in hrz_open_rx()
753     PRINTD (DBG_VCC, "using IDLE buffer pointer");  in hrz_open_rx()
770   PRINTD (DBG_FLOW, "hrz_open_rx ok");  in hrz_open_rx()
812     PRINTD (DBG_VCC, "closing VC: RX channel %u already disabled", vc);  in hrz_close_rx()
887     PRINTD (DBG_VCC|DBG_RX, "r1 = %u, r2 = %u", r1, r2);  in hrz_close_rx()
900     PRINTD (DBG_VCC|DBG_RX, "rd_ptr = %u, wr_ptr = %u", rd_ptr, wr_ptr);  in hrz_close_rx()
908 	PRINTD (DBG_RX|DBG_VCC|DBG_WARN, "marking a frame as dodgey");  in hrz_close_rx()
948       PRINTD (DBG_RX|DBG_WARN, "RX error: other PCI Bus Master RX still in progress!");  in rx_schedule()
950 	PRINTD (DBG_RX|DBG_ERR, "spun out waiting PCI Bus Master RX completion");  in rx_schedule()
966 	PRINTD (DBG_RX|DBG_BUS, "(pio)");  in rx_schedule()
970 	PRINTD (DBG_RX|DBG_BUS, "(simple or last multi)");  in rx_schedule()
973 	PRINTD (DBG_RX|DBG_BUS, "(continuing multi)");  in rx_schedule()
995 	  PRINTD (DBG_RX|DBG_BUS, "(pio)");  in rx_schedule()
999 	  PRINTD (DBG_RX|DBG_BUS, "(full region)");  in rx_schedule()
1002 	  PRINTD (DBG_RX|DBG_BUS, "(start multi region)");  in rx_schedule()
1017 	PRINTD (DBG_RX|DBG_SKB, "push %p %u", skb->data, skb->len);  in rx_schedule()
1047       PRINTD (DBG_RX, "cleared rx_busy for dev %p", dev);  in rx_schedule()
1069     PRINTD (DBG_RX|DBG_ERR, "unexpected RX bus master completion");  in rx_bus_master_complete_handler()
1079   PRINTD (DBG_TX, "sleeping at tx lock %p %lu", dev, dev->flags);  in tx_hold()
1081   PRINTD (DBG_TX, "woken at tx lock %p %lu", dev, dev->flags);  in tx_hold()
1084   PRINTD (DBG_TX, "set tx_busy for dev %p", dev);  in tx_hold()
1092   PRINTD (DBG_TX, "cleared tx_busy for dev %p", dev);  in tx_release()
1114       PRINTD (DBG_TX|DBG_WARN, "TX error: other PCI Bus Master TX still in progress!");  in tx_schedule()
1116 	PRINTD (DBG_TX|DBG_ERR, "spun out waiting PCI Bus Master TX completion");  in tx_schedule()
1128 	PRINTD (DBG_TX|DBG_BUS, "(pio)");  in tx_schedule()
1132 	PRINTD (DBG_TX|DBG_BUS, "(simple or last multi)");  in tx_schedule()
1139 	PRINTD (DBG_TX|DBG_BUS, "(continuing multi)");  in tx_schedule()
1156 	  PRINTD (DBG_TX|DBG_BUS, "(pio)");  in tx_schedule()
1160 	  PRINTD (DBG_TX|DBG_BUS, "(full region)");  in tx_schedule()
1163 	  PRINTD (DBG_TX|DBG_BUS, "(start multi region)");  in tx_schedule()
1225     PRINTD (DBG_TX|DBG_ERR, "unexpected TX bus master completion");  in tx_bus_master_complete_handler()
1257   PRINTD (DBG_FLOW, "hrz_data_av_handler");  in rx_data_av_handler()
1261     PRINTD (DBG_RX, "locked out of rx lock");  in rx_data_av_handler()
1264   PRINTD (DBG_RX, "set rx_busy for dev %p", dev);  in rx_data_av_handler()
1278   PRINTD (DBG_RX, "rx_queue_entry is: %#x", rx_queue_entry);  in rx_data_av_handler()
1289     PRINTD (DBG_RX|DBG_ERR, "Simon's marker detected!");  in rx_data_av_handler()
1294     PRINTD (DBG_RX, "got a frame on rx_channel %x len %u", rx_channel, rx_len);  in rx_data_av_handler()
1322 	    PRINTD (DBG_RX, "RX start simple transfer (addr %p, len %d)",  in rx_data_av_handler()
1330 	    PRINTD (DBG_SKB|DBG_WARN, "failed to get skb");  in rx_data_av_handler()
1344       PRINTD (DBG_WARN|DBG_VCC|DBG_RX, "no VCC for this frame (VC closed)");  in rx_data_av_handler()
1369   PRINTD (DBG_FLOW, "interrupt_handler: %p", dev_id);  in interrupt_handler()
1393       PRINTD (DBG_IRQ|DBG_BUS|DBG_RX, "rx_bus_master_complete asserted");  in interrupt_handler()
1398       PRINTD (DBG_IRQ|DBG_BUS|DBG_TX, "tx_bus_master_complete asserted");  in interrupt_handler()
1403       PRINTD (DBG_IRQ|DBG_RX, "rx_data_av asserted");  in interrupt_handler()
1408     PRINTD (DBG_IRQ, "work done: %u", irq_ok);  in interrupt_handler()
1410     PRINTD (DBG_IRQ|DBG_WARN, "spurious interrupt source: %#x", int_source);  in interrupt_handler()
1413   PRINTD (DBG_IRQ|DBG_FLOW, "interrupt_handler done: %p", dev_id);  in interrupt_handler()
1443   PRINTD (DBG_FLOW|DBG_TX, "setup_idle_tx_channel %p", dev);  in setup_idle_tx_channel()
1449     PRINTD (DBG_TX|DBG_WARN, "waiting for idle TX channel");  in setup_idle_tx_channel()
1452       PRINTD (DBG_TX|DBG_ERR, "spun out waiting for idle TX channel");  in setup_idle_tx_channel()
1522       PRINTD (DBG_TX|DBG_ERR, "TX buffer pointers are broken!");  in setup_idle_tx_channel()
1526     PRINTD (DBG_TX, "TX buffer pointers are: rd %x, wr %x.",  in setup_idle_tx_channel()
1531 	PRINTD (DBG_QOS|DBG_TX, "tx_channel: aal0");  in setup_idle_tx_channel()
1536 	PRINTD (DBG_QOS|DBG_TX, "tx_channel: aal34");  in setup_idle_tx_channel()
1575   PRINTD (DBG_FLOW|DBG_TX, "hrz_send vc %x data %p len %u",  in hrz_send()
1596     PRINTD (DBG_ERR|DBG_TX, "attempt to transmit on zero (rx_)channel");  in hrz_send()
1607       PRINTD (DBG_BUS|DBG_ERR, "Clearing PCI Master Abort (and cleaning up)");  in hrz_send()
1648     PRINTD (DBG_TX, "waiting for free TX buffers, got %d of %d",  in hrz_send()
1655       PRINTD (DBG_TX|DBG_ERR, "spun out waiting for tx buffers, got %d of %d",  in hrz_send()
1665     PRINTD (DBG_TX, "last vc hack: hit");  in hrz_send()
1668     PRINTD (DBG_TX, "last vc hack: miss");  in hrz_send()
1672 	PRINTD (DBG_TX, "vc already on channel: hit");  in hrz_send()
1676       PRINTD (DBG_TX, "vc already on channel: miss");  in hrz_send()
1680 	PRINTD (DBG_TX|DBG_ERR, "failed to get channel");  in hrz_send()
1686     PRINTD (DBG_TX, "got channel");  in hrz_send()
1693   PRINTD (DBG_TX, "using channel %u", tx_channel);  in hrz_send()
1710       PRINTD (DBG_TX|DBG_BUS, "TX start scatter-gather transfer (iovec %p, len %d)",  in hrz_send()
1721       PRINTD (DBG_TX|DBG_BUS, "TX start simple transfer (addr %p, len %d)",  in hrz_send()
1841   PRINTD (DBG_INFO, "ctrl0reg is %#x", ctrl);  in hrz_init()
2047   PRINTD (DBG_FLOW|DBG_QOS, "check_max_sdu");  in check_max_sdu()
2052 	PRINTD (DBG_QOS, "defaulting max_sdu");  in check_max_sdu()
2055 	PRINTD (DBG_QOS|DBG_ERR, "rejecting max_sdu");  in check_max_sdu()
2061 	PRINTD (DBG_QOS, "%sing max_sdu", tp->max_sdu ? "capp" : "default");  in check_max_sdu()
2067 	PRINTD (DBG_QOS, "%sing max_sdu", tp->max_sdu ? "capp" : "default");  in check_max_sdu()
2081     PRINTD (DBG_QOS, "luser gave min_pcr = ATM_MAX_PCR");  in atm_pcr_check()
2083     PRINTD (DBG_QOS, "luser gave negative min_pcr");  in atm_pcr_check()
2085     PRINTD (DBG_QOS, "pcr less than min_pcr");  in atm_pcr_check()
2091       PRINTD (DBG_QOS, "luser gave max_pcr = ATM_MAX_PCR");  in atm_pcr_check()
2093       PRINTD (DBG_QOS, "luser gave negative max_pcr");  in atm_pcr_check()
2095       PRINTD (DBG_QOS, "pcr greater than max_pcr");  in atm_pcr_check()
2098       PRINTD (DBG_QOS, "xBR(pcr) OK");  in atm_pcr_check()
2101   PRINTD (DBG_QOS, "pcr=%u, tp: min_pcr=%d, pcr=%d, max_pcr=%d",  in atm_pcr_check()
2122   PRINTD (DBG_FLOW|DBG_VCC, "hrz_open %x %x", vpi, vci);  in hrz_open()
2134     PRINTD (DBG_WARN|DBG_VCC, "VPI/VCI out of range: %hd/%d", vpi, vci);  in hrz_open()
2148       PRINTD (DBG_QOS|DBG_VCC, "AAL0");  in hrz_open()
2153       PRINTD (DBG_QOS|DBG_VCC, "AAL3/4");  in hrz_open()
2157       PRINTD (DBG_QOS|DBG_VCC, "AAL5");  in hrz_open()
2161       PRINTD (DBG_QOS|DBG_VCC, "Bad AAL!");  in hrz_open()
2199   PRINTD (DBG_QOS, "TX:");  in hrz_open()
2216       PRINTD (DBG_QOS, "TX max_sdu check failed");  in hrz_open()
2250 	  PRINTD (DBG_QOS, "snatching all remaining TX bandwidth");  in hrz_open()
2261 	  PRINTD (DBG_QOS, "could not make rate from TX PCR");  in hrz_open()
2267 	  PRINTD (DBG_QOS, "TX PCR failed consistency check");  in hrz_open()
2298 	  PRINTD (DBG_QOS, "snatching all remaining TX bandwidth");  in hrz_open()
2309 	  PRINTD (DBG_QOS, "could not make rate from TX SCR");  in hrz_open()
2315 	  PRINTD (DBG_QOS, "TX SCR failed consistency check");  in hrz_open()
2325 	  PRINTD (DBG_QOS, "shrinking bucket from %u to %u",  in hrz_open()
2335 	PRINTD (DBG_QOS, "unsupported TX traffic class");  in hrz_open()
2343   PRINTD (DBG_QOS, "RX:");  in hrz_open()
2353       PRINTD (DBG_QOS, "RX max_sdu check failed");  in hrz_open()
2373 	  PRINTD (DBG_QOS, "snatching all remaining RX bandwidth");  in hrz_open()
2382 	  PRINTD (DBG_QOS, "RX PCR failed consistency check");  in hrz_open()
2394 	  PRINTD (DBG_QOS, "snatching all remaining RX bandwidth");  in hrz_open()
2403 	  PRINTD (DBG_QOS, "RX SCR failed consistency check");  in hrz_open()
2410 	PRINTD (DBG_QOS, "unsupported RX traffic class");  in hrz_open()
2419     PRINTD (DBG_QOS, "AAL not supported");  in hrz_open()
2436     PRINTD (DBG_QOS, "not enough TX PCR left");  in hrz_open()
2441     PRINTD (DBG_QOS, "not enough RX PCR left");  in hrz_open()
2449     PRINTD (DBG_QOS|DBG_VCC, "reserving %u TX PCR and %u RX PCR",  in hrz_open()
2456     PRINTD (DBG_QOS|DBG_VCC, "insufficient cell rate resources");  in hrz_open()
2469       PRINTD (DBG_ERR|DBG_VCC, "VC already open for RX");  in hrz_open()
2497   PRINTD (DBG_VCC|DBG_FLOW, "hrz_close");  in hrz_close()
2533   PRINTD (DBG_QOS|DBG_VCC, "releasing %u TX PCR and %u RX PCR",  in hrz_close()
2549   PRINTD (DBG_FLOW|DBG_VCC, "hrz_getsockopt");
2568   PRINTD (DBG_FLOW|DBG_VCC, "hrz_setsockopt");
2588   PRINTD (DBG_FLOW, "hrz_ioctl");
2594   PRINTD (DBG_FLOW, "hrz_phy_get");
2601   PRINTD (DBG_FLOW, "hrz_phy_put");
2606   PRINTD (DBG_FLOW, "hrz_change_qos");
2616   PRINTD (DBG_FLOW, "hrz_proc_read");  in hrz_proc_read()
2674 	PRINTD (DBG_FLOW, "hrz_probe");  in hrz_probe()
2688 		PRINTD(DBG_ERR, "out of memory");  in hrz_probe()
2702 		PRINTD(DBG_WARN, "request IRQ failed!");  in hrz_probe()
2707 	PRINTD(DBG_INFO, "found Madge ATM adapter (hrz) at: IO %x, IRQ %u, MEM %p",  in hrz_probe()
2713 		PRINTD(DBG_ERR, "failed to register Madge ATM adapter");  in hrz_probe()
2718 	PRINTD(DBG_INFO, "registered Madge ATM adapter (no. %d) (%p) at %p",  in hrz_probe()
2729 		PRINTD(DBG_INFO, "%s PCI latency timer from %hu to %hu",  in hrz_probe()
2783 		PRINTD(DBG_WARN, "Buggy ASIC: no TX bus-mastering.");  in hrz_probe()
2822 	PRINTD(DBG_INFO, "closing %p (atm_dev = %p)", dev, dev->atm_dev);  in hrz_remove_one()
2902   PRINTD (DBG_FLOW, "cleanup_module");  in hrz_module_exit()