603 	PRINTD (DBG_QOS|DBG_FLOW, "make_rate b=%lu, c=%u, %s", br, c,  in make_rate()
608 		PRINTD (DBG_QOS|DBG_ERR, "zero rate is not allowed!");  in make_rate()
641 		PRINTD (DBG_QOS, "A: p=%u, d=%u", pre, div);  in make_rate()
665 			PRINTD (DBG_QOS, "B: p=%u, d=%u", pre, div);  in make_rate()
676 	PRINTD (DBG_QOS, "C: p=%u, d=%u", pre, div);  in make_rate()
680 		PRINTD (DBG_QOS, "set_cr internal failure: d=%u p=%u",  in make_rate()
688 			PRINTD (DBG_QOS, "actual rate: %u", *actual);  in make_rate()
698   PRINTD (DBG_QOS|DBG_FLOW, "make_rate_with_tolerance c=%u, %s, tol=%u",  in make_rate_with_tolerance()
1531 	PRINTD (DBG_QOS|DBG_TX, "tx_channel: aal0");  in setup_idle_tx_channel()
1536 	PRINTD (DBG_QOS|DBG_TX, "tx_channel: aal34");  in setup_idle_tx_channel()
2047   PRINTD (DBG_FLOW|DBG_QOS, "check_max_sdu");  in check_max_sdu()
2052 	PRINTD (DBG_QOS, "defaulting max_sdu");  in check_max_sdu()
2055 	PRINTD (DBG_QOS|DBG_ERR, "rejecting max_sdu");  in check_max_sdu()
2061 	PRINTD (DBG_QOS, "%sing max_sdu", tp->max_sdu ? "capp" : "default");  in check_max_sdu()
2067 	PRINTD (DBG_QOS, "%sing max_sdu", tp->max_sdu ? "capp" : "default");  in check_max_sdu()
2081     PRINTD (DBG_QOS, "luser gave min_pcr = ATM_MAX_PCR");  in atm_pcr_check()
2083     PRINTD (DBG_QOS, "luser gave negative min_pcr");  in atm_pcr_check()
2085     PRINTD (DBG_QOS, "pcr less than min_pcr");  in atm_pcr_check()
2091       PRINTD (DBG_QOS, "luser gave max_pcr = ATM_MAX_PCR");  in atm_pcr_check()
2093       PRINTD (DBG_QOS, "luser gave negative max_pcr");  in atm_pcr_check()
2095       PRINTD (DBG_QOS, "pcr greater than max_pcr");  in atm_pcr_check()
2098       PRINTD (DBG_QOS, "xBR(pcr) OK");  in atm_pcr_check()
2101   PRINTD (DBG_QOS, "pcr=%u, tp: min_pcr=%d, pcr=%d, max_pcr=%d",  in atm_pcr_check()
2148       PRINTD (DBG_QOS|DBG_VCC, "AAL0");  in hrz_open()
2153       PRINTD (DBG_QOS|DBG_VCC, "AAL3/4");  in hrz_open()
2157       PRINTD (DBG_QOS|DBG_VCC, "AAL5");  in hrz_open()
2161       PRINTD (DBG_QOS|DBG_VCC, "Bad AAL!");  in hrz_open()
2199   PRINTD (DBG_QOS, "TX:");  in hrz_open()
2216       PRINTD (DBG_QOS, "TX max_sdu check failed");  in hrz_open()
2250 	  PRINTD (DBG_QOS, "snatching all remaining TX bandwidth");  in hrz_open()
2261 	  PRINTD (DBG_QOS, "could not make rate from TX PCR");  in hrz_open()
2267 	  PRINTD (DBG_QOS, "TX PCR failed consistency check");  in hrz_open()
2298 	  PRINTD (DBG_QOS, "snatching all remaining TX bandwidth");  in hrz_open()
2309 	  PRINTD (DBG_QOS, "could not make rate from TX SCR");  in hrz_open()
2315 	  PRINTD (DBG_QOS, "TX SCR failed consistency check");  in hrz_open()
2325 	  PRINTD (DBG_QOS, "shrinking bucket from %u to %u",  in hrz_open()
2335 	PRINTD (DBG_QOS, "unsupported TX traffic class");  in hrz_open()
2343   PRINTD (DBG_QOS, "RX:");  in hrz_open()
2353       PRINTD (DBG_QOS, "RX max_sdu check failed");  in hrz_open()
2373 	  PRINTD (DBG_QOS, "snatching all remaining RX bandwidth");  in hrz_open()
2382 	  PRINTD (DBG_QOS, "RX PCR failed consistency check");  in hrz_open()
2394 	  PRINTD (DBG_QOS, "snatching all remaining RX bandwidth");  in hrz_open()
2403 	  PRINTD (DBG_QOS, "RX SCR failed consistency check");  in hrz_open()
2410 	PRINTD (DBG_QOS, "unsupported RX traffic class");  in hrz_open()
2419     PRINTD (DBG_QOS, "AAL not supported");  in hrz_open()
2436     PRINTD (DBG_QOS, "not enough TX PCR left");  in hrz_open()
2441     PRINTD (DBG_QOS, "not enough RX PCR left");  in hrz_open()
2449     PRINTD (DBG_QOS|DBG_VCC, "reserving %u TX PCR and %u RX PCR",  in hrz_open()
2456     PRINTD (DBG_QOS|DBG_VCC, "insufficient cell rate resources");  in hrz_open()
2533   PRINTD (DBG_QOS|DBG_VCC, "releasing %u TX PCR and %u RX PCR",  in hrz_close()