Lines Matching refs:hypercall

9  The hypercall number should be placed in rax and the return value will be
11  by the particular hypercall.
14   R2-R7 are used for parameters 1-6. In addition, R1 is used for hypercall
17   S390 uses diagnose instruction as hypercall (0x500) along with hypercall
24   It uses R3-R10 and hypercall number in R11. R4-R11 are used as output registers.
27   KVM hypercalls uses 4 byte opcode, that are patched with 'hypercall-instructions'
32   KVM hypercalls use the HYPCALL instruction with code 0 and the hypercall
38 The template for each hypercall is:
62 Purpose: Expose hypercall availability to the guest. On x86 platforms, cpuid
65 mechanism (which is this hypercall) can be used.
74 memory using this hypercall.
86 same guest can wakeup the sleeping vcpu by issuing KVM_HC_KICK_CPU hypercall,
88 is used in the hypercall for future use.
118 The hypercall lets a guest compute a precise timestamp across
136 The hypercall lets a guest send multicast IPIs, with at most 128
137 128 destinations per hypercall in 64-bit mode and 64 vCPUs per
138 hypercall in 32-bit mode.  The destinations are represented by a