Lines Matching refs:Host
26 This driver supports all present BusLogic MultiMaster Host Adapters, and should
28 recently, BusLogic introduced the FlashPoint Host Adapters, which are less
30 Despite not having an onboard CPU, the FlashPoint Host Adapters perform very
35 analogous to the firmware on the MultiMaster Host Adapters. Thanks to their
36 having provided the SCCB Manager, this driver now supports the FlashPoint Host
40 to achieve the full performance that BusLogic SCSI Host Adapters and modern
47 The latest information on Linux support for BusLogic SCSI Host Adapters, as
61 the BT-948 PCI Ultra SCSI Host Adapter, and then again for the BT-958 PCI Wide
62 Ultra SCSI Host Adapter in January 1996. This was mutually beneficial since
135 BusLogic SCSI Host Adapters directly implement SCSI-2 Tagged Queuing, and so
195 On systems that support shared interrupts, any number of BusLogic Host
201 The following list comprises the supported BusLogic SCSI Host Adapters as of
203 Host Adapter not in the following table contact the author beforehand to verify
206 FlashPoint Series PCI Host Adapters:
218 MultiMaster "W" Series Host Adapters:
224 MultiMaster "C" Series Host Adapters:
236 MultiMaster "S" Series Host Adapters:
248 MultiMaster "A" Series Host Adapters:
253 AMI FastDisk Host Adapters that are true BusLogic MultiMaster clones are also
256 BusLogic SCSI Host Adapters are available packaged both as bare boards and as
267 FlashPoint Host Adapters now include RAIDPlus, Mylex's bootable software
278 FlashPoint Host Adapters ship with their configuration set to "Factory
292 The BT-948/958/958D PCI Ultra SCSI Host Adapters have some features which may
300 that previous BusLogic SCSI Host Adapters respond to. This driver supports
317 In systems with multiple BusLogic PCI Host Adapters, the order in which the
372 MultiMaster Host Adapter. If neither "IO:" nor "NoProbeISA" options are
380 The "NoProbe" option disables all probing and therefore no BusLogic Host
386 Addresses and therefore only PCI MultiMaster and FlashPoint Host Adapters
392 Space and therefore only ISA Multimaster Host Adapters will be detected, as
393 well as PCI Multimaster Host Adapters that have their ISA Compatible I/O
398 The "NoSortPCI" option forces PCI MultiMaster Host Adapters to be
404 The "MultiMasterFirst" option forces MultiMaster Host Adapters to be probed
405 before FlashPoint Host Adapters. By default, if both FlashPoint and PCI
406 MultiMaster Host Adapters are present, this driver will probe for
407 FlashPoint Host Adapters first unless the BIOS primary disk is controlled
408 by the first PCI MultiMaster Host Adapter, in which case MultiMaster Host
413 The "FlashPointFirst" option forces FlashPoint Host Adapters to be probed
414 before MultiMaster Host Adapters.
420 presented for execution (either to the Host Adapter or Target Device). Note
432 on the Host Adapter's Total Queue Depth and the number, type, speed, and
433 capabilities of the detected Target Devices. For Host Adapters that
451 based on the firmware version of the BusLogic Host Adapter and based on
457 all Target Devices on this Host Adapter, overriding any limitation that
458 would otherwise be imposed based on the Host Adapter firmware version.
463 for all Target Devices on this Host Adapter.
481 seconds. The Bus Settle Time is the amount of time to wait between a Host
488 Target Devices or Inquire Installed Devices command on MultiMaster Host
496 The "TraceProbe" option enables tracing of Host Adapter Probing.
500 The "TraceHardwareReset" option enables tracing of Host Adapter Hardware
505 The "TraceConfiguration" option enables tracing of Host Adapter
564 for BusLogic SCSI Host Adapters. To join the mailing list, send a message to