Lines Matching refs:suspended

89     core regards the device as suspended, which need not mean that it has been
94     'suspended'.
103     is directly set to  either 'active', or 'suspended' (the PM core provides
131     'suspended' (by means of special helper functions provided by the PM core
146 if the device can be suspended (i.e. if all of the conditions necessary for
178 (4) ->runtime_resume() can only be executed for 'suspended' devices  (i.e. the
180     PM status of which is 'suspended').
254       suspend to complete; means "start a resume as soon as you've suspended"
259       PM core as 'suspended', regardless of its real hardware status
315       success, 1 if the device's runtime PM status was already 'suspended', or
349       runtime status was already 'suspended', or error code if the request
435       PM status to 'suspended' and update its parent's counter of 'active'
445     - return true if the device's runtime PM status is 'suspended' and its
449     - return true if the device's runtime PM status is 'suspended'
542 'suspended', but it need not reflect the actual physical state of the device.
556 status should be changed back to 'suspended' with the help of
559 If the default initial runtime PM status of the device (i.e. 'suspended')
583 resumes the device if it's in the suspended state and prevents it from
584 being suspended again while those routines are being executed.
586 To allow bus types and drivers to put devices into the suspended state by
615 straightforward.  But what should happen if the device is already suspended?
627 power, even if they had been suspended before the system suspend began.  There
642   * Even though the device was suspended, if its usage counter was > 0 then most
645 If the device had been suspended before the system suspend began and it's
670 be more efficient to leave the devices that had been suspended before the system
671 suspend began in the suspended state.
676 that the device appears to be runtime-suspended and its state is fine, so it
717     - if the device has not been suspended at run time, invoke the ->suspend()
734     - if the device has not been suspended at run time, invoke the ->freeze()
744     - if the device has not been suspended at run time, invoke the ->thaw()
754     - if the device has not been suspended at run time, invoke the ->poweroff()
802 devices should be suspended.
815 unused; following this advice, drivers should not allow devices to be suspended
821 device is automatically suspended (the subsystem or driver still has to call