Lines Matching refs:queues

21 - TX queues must be rated starting from txq0 that has highest priority
23 - CBS shapers should be used with rated queues
25   potential incoming rate, thus, rate of all incoming tx queues has
139 // Add 4 tx queues, for interface Eth0, and 1 tx queue for Eth1
144 // Check if num of queues is set correctly:
159 // TX queues must be rated starting from 0, so set bws for tx0 and tx1
162 // Leave last 2 tx queues not rated.
163 $ echo 40 > /sys/class/net/eth0/queues/tx-0/tx_maxrate
164 $ echo 20 > /sys/class/net/eth0/queues/tx-1/tx_maxrate
167 // Check maximum rate of tx (cpdma) queues:
168 $ cat /sys/class/net/eth0/queues/tx-*/tx_maxrate
181 map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@1 2@2 hw 1
184 // As two interface sharing same set of tx queues, assign all traffic
190 map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 queues 1@4 hw 0
354 // Add 8 tx queues, for interface Eth0, but they are common, so are accessed
360 // Check if num of queues is set correctly:
375 // TX queues must be rated starting from 0, so set bws for tx0 and tx1 for Eth0
379 // Leave last 4 tx queues as not rated
380 $ echo 40 > /sys/class/net/eth0/queues/tx-0/tx_maxrate
381 $ echo 20 > /sys/class/net/eth0/queues/tx-1/tx_maxrate
382 $ echo 30 > /sys/class/net/eth1/queues/tx-2/tx_maxrate
383 $ echo 10 > /sys/class/net/eth1/queues/tx-3/tx_maxrate
386 // Check maximum rate of tx (cpdma) queues:
387 $ cat /sys/class/net/eth0/queues/tx-*/tx_maxrate
403 map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@1 2@4 hw 1
455 map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@2 1@3 2@6 hw 1