Lines Matching refs:identifier

38 		A mapping of an ILA identifier to a locator (or to a
44 		four bits) and an identifier (lower sixty-four bits).
51 		bits) and an identifier (low order sixty-four bits). ILA
125 		the checksum. The low order sixteen bits of the identifier
131 bits of the identifier. When ILA to SIR address translation is done on
133 restores the identifier as it was originally sent.
143       0: interface identifier
145       1: locally unique identifier
147       2: virtual networking identifier for IPv4 address
149       3: virtual networking identifier for IPv6 unicast address
151       4: virtual networking identifier for IPv6 multicast address
153       5: non-local address identifier
157 identifier.
163 Kernel ILA supports two optional fields in an identifier for formatting:
164 "C-bit" and "identifier type". The presence of these fields is determined
167 If the identifier type is present it occupies the three highest order
168 bits of an identifier. The possible values are given in the above list.
174 In the simplest format the identifier types, C-bit, and checksum
175 adjustment value are not present so an identifier is considered an
186 checksum adjustment is in the low order 16 bits. The identifier is
204 The identifier type field may be present to indicate the identifier
207 used with the identifier type as illustrated below.
215 If the identifier type and the C-bit can be present simultaneously so
216 the identifier format would be:
245 "use-format." In the case of use-format, the identifier type field is
268 # (no C-bit) and configure identifier type to be LUID so that the
269 # identifier type field will not be present.
277 # identifier field are used.
282 # set without the C-bit and the identifier type is configured to be LUID
283 # so that the identifier type field is not present.