13 - Speed and Duplex Configuration
38 	For more information about the AutoNeg, Duplex, and Speed
39         parameters, see the "Speed and Duplex Configuration" section in
56 advertised by the adapter.  When this parameter is used, the Speed and
60        Refer to the Speed and Duplex section of this readme for more
241 Speed  section in Command Line Parameters
249 Speed forces the line speed to the specified value in megabits per second
252 speed.  Duplex should also be set when Speed is set to either 10 or 100.
333 Speed and Duplex Configuration
337 These keywords are Speed, Duplex, and AutoNeg.
348 - If Speed = 1000, limited auto-negotiation is enabled and only 1000 Mbps
351 - If Speed = 10 or 100, then both Speed and Duplex should be set.  Auto-
367 Speed (Mbps)   N/A    N/A    1000    N/A     100    100    10      10
383 Note that when this parameter is used, Speed and Duplex must not be specified.
386 parameter should not be used.  Instead, use the Speed and Duplex parameters