Lines Matching refs:MIPI
30 camera sensors over Parallel, BT.656/1120, and MIPI CSI-2 busses.
64 - MIPI CSI-2 Receiver for camera sensors with the MIPI CSI-2 bus
82 - Supports parallel, BT.565, and MIPI CSI-2 interfaces.
109 This is the MIPI CSI-2 receiver entity. It has one sink pad to receive
110 the MIPI CSI-2 stream (usually from a MIPI CSI-2 camera sensor). It has
111 four source pads, corresponding to the four MIPI CSI-2 demuxed virtual
115 This entity actually consists of two sub-blocks. One is the MIPI CSI-2
116 core. This is a Synopsys Designware MIPI CSI-2 core. The other sub-block
136 MIPI CSI-2 virtual channels from imx6-mipi-csi2 entity. They have a
141 the four MIPI CSI-2 virtual channels (a total of five sink pads). The
143 select between a parallel sensor and any of the four MIPI CSI-2 virtual
147 IPU1-CSI0 to select between a parallel sensor and MIPI CSI-2 virtual
149 select between a parallel sensor and MIPI CSI-2 virtual channel 3 (two
156 either a video mux or from a MIPI CSI-2 virtual channel as described
460 camera interface, and the OV5640 module with a MIPI CSI-2
472 The MIPI CSI-2 OV5640 module is connected to the i.MX internal MIPI CSI-2
481 the OV5640, transmitting on MIPI CSI-2 virtual channel 1 (which is
546 SabreSD with MIPI CSI-2 OV5640
550 OV5642 module on IPU1 CSI0, and a MIPI CSI-2 OV5640 module. The OV5642
554 OV5642 and the MIPI CSI-2 OV5640, but as of this writing only the MIPI
556 The OV5640 module connects to MIPI connector J5 (sorry I don't have the
560 from the OV5640, transmitting on MIPI CSI-2 virtual channel 1. $sensorfmt