Lines Matching refs:bttv
1 The bttv driver
4 Release notes for bttv
7 You'll need at least these config options for bttv:
15 The latest bttv version is available from http://bytesex.org/bttv/
18 Make bttv work with your card
21 Just try "modprobe bttv" and see if that works.
23 If it doesn't bttv likely could not autodetect your card and needs some
24 insmod options. The most important insmod option for bttv is "card=n"
27 cards is in CARDLIST.bttv
29 If bttv takes very long to load (happens sometimes with the cheap
42 If your card isn't listed in CARDLIST.bttv or if you have trouble making
49 bttv uses the PCI Subsystem ID to autodetect the card type. lspci lists
62 in bttv-cards.c (in case you are intrested or want to mail patches
99 bttv.o
138 push used by bttv. bttv will disable overlay
270 part of bttv.c, so if your sound used to work but does not
287 If the box freezes hard with bttv
290 It might be a bttv driver bug. It also might be bad hardware. It also
293 Just mailing me "bttv freezes" isn't going to help much. This README
297 bttv bugs argument
319 I've seen reports that bttv 0.7.x crashes whereas 0.8.x works rock solid
320 for some people. Thus probably a small buglet left somewhere in bttv
330 Sometimes problems show up with bttv just because of the high load on
336 only makes it less likely to happen. Both bttv and btaudio have a
340 doing DMA at the same time. bttv + ide seems to cause this sometimes,
354 try to shuffle around the PCI cards to give bttv another IRQ or make
357 effects with bttv sharing the IRQ with the ACPI bridge (and
373 messages, bttv tells you).
439 bttv and sound mini howto
448 bttv-cards.c, which holds the information required for each board.
450 makes no difference). The bttv driver prints a line to the kernel
458 correct board type as insmod argument, "insmod bttv card=2" for
534 Starting with release 0.7.41 bttv has a number of insmod options to
956 insmod bttv pll=1 radio=1 card=17
1820 Chips used at bttv devices