Lines Matching refs:IR
10 a bi-directional interface for transporting raw IR and decoded scancodes
13 file_operations defined on it. With respect to transporting raw IR and
21 rc rc0: lirc_dev: driver mceusb registered at minor = 0, raw IR receiver, raw IR transmitter
36 LIRC supports some modes of receiving and sending IR codes, as shown
45 This mode is for both sending and receiving IR.
49 set the IR protocol, and all other members set to 0. Write this struct to
53 with ``scancode`` set to the received scancode and the IR protocol
83 This mode is used only for IR receive.
92 Signifies the presence of IR in microseconds.
96 Signifies absence of IR in microseconds.
108 :ref:`lirc_set_rec_timeout` expires due to no IR being detected,
110 no IR.
123 This mode is used only for IR send.
131 supported IR protocols: