Lines Matching refs:nodes

47  node may write to those sectors.  This is used when a new nodes
52  Each node has to communicate with other nodes when starting or ending
61  Normally all nodes hold a concurrent-read lock on this device.
65  Messages can be broadcast to all nodes, and the sender waits for all
66  other nodes to acknowledge the message before proceeding.  Only one
73  3.1.1 METADATA_UPDATED: informs other nodes that the metadata has
78  3.1.2 RESYNCING: informs other nodes that a resync is initiated or
85  3.1.3 NEWDISK: informs other nodes that a device is being added to
101  The DLM LVB is used to communicate within nodes of the cluster. There
112    acknowledged by all nodes in the cluster. The BAST of the resource
118  1. receive status - all nodes have concurrent-reader lock on "ack".
184 		other nodes from writing anywhere on the array.
187  environment when a resync is performed, it needs to tell other nodes
194  other nodes and other nodes remove the corresponding entry from the
205  acknowledged by all other nodes.
209  For adding a new device, it is necessary that all nodes "see" the new
215     3. Other nodes issue kobject_uevent_env with uuid and slot number
219     5. Other nodes issue either of the following depending on whether
224     6. Other nodes drop lock on "no-new-devs" (CR) if device is found
230    10. Other nodes get the information whether a disk is added or not
239 6.1 join(nodes) and leave()
244  Only the first 'nodes' nodes in the cluster can use the array.
249  Range is from 0 to nodes-1.
274  message to all other nodes, otherwise metadata_update_cancel()
305  the array.  It causes a REMOVE message to be send to other nodes.
309  This sends a RE_ADD message to all other nodes and then
317  nodes are using the raid which is achieved by lock all bitmap