Lines Matching refs:cards

44    PCI isdn cards Champ, Ergo and Metro. To enable support for this cards
45    enable ISDN support in the kernel config and support for HYSDN cards in
46    the active cards submenu. The driver may only be compiled and used if 
49    These cards provide two different interfaces to the kernel. Without the
59    active AVM cards and in fact uses the same module.
64    The module has no command line parameters and auto detects up to 10 cards
84    The cards are numbered in the order found in the PCI config data.
88    This file may be read to get by everyone to get info about the cards type, 
91    type field gives the information about the cards type:
116    the cards firmware. The type of data is automatically detected when the 
118    The firmware boot files are normally called hyclient.pof for client cards
119    and hyserver.pof for server cards.
143    get the cards and drivers log data. Card messages always start with the
146    appropriate bitmask. The cards log messages will always be send to this
150    desired output options. As mentioned above the cards log dat is always