Lines Matching refs:attributes

62 as well as all sysfs attributes attached to the hwmon device.
72 attributes in the hardware monitoring core, letting the driver focus on reading
73 from and writing to the chip instead of having to bother with sysfs attributes.
144   is optional, but must be provided if any readable attributes exist.
147   optional, but must be provided if any writeable attributes exist.
161   * hwmon_chip		A virtual sensor type, used to describe attributes
174   describing the attributes supposed by a single sensor.
224 HWMON_C_xxxx	Chip attributes, for use with hwmon_chip.
225 HWMON_T_xxxx	Temperature attributes, for use with hwmon_temp.
226 HWMON_I_xxxx	Voltage attributes, for use with hwmon_in.
227 HWMON_C_xxxx	Current attributes, for use with hwmon_curr.
228 		Notice the prefix overlap with chip attributes.
229 HWMON_P_xxxx	Power attributes, for use with hwmon_power.
230 HWMON_E_xxxx	Energy attributes, for use with hwmon_energy.
231 HWMON_H_xxxx	Humidity attributes, for use with hwmon_humidity.
232 HWMON_F_xxxx	Fan speed attributes, for use with hwmon_fan.
233 HWMON_PWM_xxxx	PWM control attributes, for use with hwmon_pwm.
290 Driver-provided sysfs attributes
295 it is most likely not necessary to provide sysfs attributes. Only additional
296 non-standard sysfs attributes need to be provided when one of those registration
300 declare and use hardware monitoring sysfs attributes.
303 attributes. This is feasible if an attribute has no additional context. However,
307 SENSOR_DEVICE_ATTR and SENSOR_DEVICE_ATTR_2 can be used to define attributes