Lines Matching refs:regulators
11 switches, and LDO/SMPS regulators which have a fixed voltage and mode.
17 RPMh regulators must be described in two levels of device nodes. The first
18 level describes the PMIC containing the regulators and must reside within an
20 which is to be used on the board. Each of these regulators maps to a single
36 Definition: Must be one of: "qcom,pm8998-rpmh-regulators",
37 "qcom,pmi8998-rpmh-regulators" or
38 "qcom,pm8005-rpmh-regulators".
43 Definition: RPMh resource name suffix used for the regulators found on
53 regulators for this PMIC.
81 regulators for this PMIC.
102 specified for VRM regulators using mode values from
104 may be specified for BOB type regulators managed via VRM.
105 regulator-allow-set-load may be specified for LDO type regulators managed via
115 pm8998-rpmh-regulators {
116 compatible = "qcom,pm8998-rpmh-regulators";
147 pmi8998-rpmh-regulators {
148 compatible = "qcom,pmi8998-rpmh-regulators";