Lines Matching refs:battery
3 The devicetree battery node provides static battery characteristics.
5 on a fuel gauge chip. The battery node should be used where there is
8 Upstream dts files should not include battery nodes, unless the battery
11 behavior should a replacement that changes the battery type occur
15 - compatible: Must be "simple-battery"
18 - voltage-min-design-microvolt: drained battery voltage
19 - energy-full-design-microwatt-hours: battery design energy
20 - charge-full-design-microamp-hours: battery design capacity
32 "monitored-battery".
36 bat: battery {
37 compatible = "simple-battery";
49 monitored-battery = <&bat>;
55 monitored-battery = <&bat>;