Lines Matching refs:configuration

3 Hardware modules that control pin multiplexing or configuration parameters
8 Hardware modules whose signals are affected by pin configuration are
14 single static pin configuration, e.g. set up during initialization. Others
22 configuration used by those states.
26 driver loads. This would allow representing a board's static pin configuration
31 they require certain specific named states for dynamic pin configuration.
37 property exists to define the pin configuration. Each state may also be
47 pinctrl-0:	List of phandles, each pointing at a pin configuration
48 		node. These referenced pin configuration nodes must be child
53 		contributing part of the overall configuration. See the next
55 		pin configuration nodes.
65 pinctrl-1:	List of phandles, each pointing at a pin configuration
68 pinctrl-n:	List of phandles, each pointing at a pin configuration
90 	 * For an IP block whose binding supports pin configuration,
107 		pin configuration. This allows using an OS that does not have a
112 Pin controller devices should contain the pin configuration nodes that client
131 The contents of each of those pin configuration child nodes is defined
136 The pin configuration nodes need not be direct children of the pin controller
178 binding with a hardware based index and a number of pin configuration values:
213 property, where the pin identifier is provided with mux configuration settings
218 a single pin multiplexing configuration.
227 how pin IDs and pin multiplexing configuration are defined and assembled
230 == Generic pin configuration node content ==
232 Many data items that are represented in a pin configuration node are common
245 			  supports configuration of whole groups rather than