Lines Matching refs:adi
5 * "adi,adf4350": When using the ADF4350 device
6 * "adi,adf4351": When using the ADF4351 device
15 - adi,channel-spacing: Channel spacing in Hz (influences MODULUS).
16 - adi,power-up-frequency: If set in Hz the PLL tunes to
18 - adi,reference-div-factor: If set the driver skips dynamic calculation
20 - adi,reference-doubler-enable: Enables reference doubler.
21 - adi,reference-div2-enable: Enables reference divider.
22 - adi,phase-detector-polarity-positive-enable: Enables positive phase
24 - adi,lock-detect-precision-6ns-enable: Enables 6ns lock detect precision.
26 - adi,lock-detect-function-integer-n-enable: Enables lock detect
28 - adi,charge-pump-current: Charge pump current in mA.
30 - adi,muxout-select: On chip multiplexer output selection.
39 - adi,low-spur-mode-enable: Enables low spur mode.
41 - adi,cycle-slip-reduction-enable: Enables cycle slip reduction.
42 - adi,charge-cancellation-enable: Enabled charge pump
44 - adi,anti-backlash-3ns-enable: Enables 3ns antibacklash pulse width
46 - adi,band-select-clock-mode-high-enable: Enables faster band
48 - adi,12bit-clk-divider: Clock divider value used when
49 adi,12bit-clkdiv-mode != 0
50 - adi,clk-divider-mode:
55 - adi,aux-output-enable: Enables auxiliary RF output.
56 - adi,aux-output-fundamental-enable: Selects fundamental VCO output on
58 - adi,mute-till-lock-enable: Enables Mute-Till-Lock-Detect function.
59 - adi,output-power: Output power selection.
65 - adi,aux-output-power: Auxiliary output power selection.
75 compatible = "adi,adf4351";
80 adi,channel-spacing = <10000>;
81 adi,power-up-frequency = <2400000000>;
82 adi,phase-detector-polarity-positive-enable;
83 adi,charge-pump-current = <2500>;
84 adi,output-power = <3>;
85 adi,mute-till-lock-enable;