Lines Matching refs:rebuild

281 enclosure, the controller is able to rebuild failed drives automatically as
293 syslog.  The progress of asynchronous rebuild or consistency check operations
359     Note that the flush-cache command also stops an asynchronous rebuild or
374     one of them back online, after which a rebuild to the final drive is
380     drive; rebuild should be used if only a single drive is dead.
386     a dead drive was replaced after an automatic rebuild was performed onto a
391   rebuild <channel>:<target-id>
393     The "rebuild" command initiates an asynchronous rebuild onto physical drive
404   cancel-rebuild
407     The "cancel-rebuild" and "cancel-consistency-check" commands cancel any
408     rebuild or consistency check operations previously initiated.
490 replaced and a rebuild operation completed to restore the redundancy of the
494 controller to initiate a rebuild operation onto the newly replaced drive:
496 gwynedd:/u/lnz# echo "rebuild 1:1" > /proc/rd/c0/user_command
500 The echo command instructs the controller to initiate an asynchronous rebuild
506 asynchronous rebuild operation:
529 As the rebuild progresses, the current status in /proc/rd/c0/current_status is
553 Finally, the rebuild completes successfully.  The driver logs the status of the 
554 logical and physical drives and the rebuild completion:
642 reflects the drive failure and automatic rebuild.  The status message in
664 As the rebuild progresses, the current status in /proc/rd/c0/current_status is
688 Finally, the rebuild completes successfully.  The driver logs the status of the 
689 logical and physical drives and the rebuild completion: