Lines Matching refs:selection

36 Since the hardware P-state selection interface used by ``intel_pstate`` is
68 provides its own scaling algorithms for P-state selection.  Those algorithms
71 ``sysfs``).  [Note that different P-state selection algorithms may be chosen for
77 For example, the ``powersave`` P-state selection algorithm provided by
81 There are two P-state selection algorithms provided by ``intel_pstate`` in the
86 Which of the P-state selection algorithms is used by default depends on the
101 internal P-state selection logic.  What those hints are depends on which P-state
102 selection algorithm has been applied to the given policy (or to the CPU it
105 Even though the P-state selection is carried out by the processor automatically,
107 in this mode.  However, they are not used for running a P-state selection
117 internal P-state selection logic is expected to focus entirely on performance.
123 internal P-state selection logic is always restricted to the upper boundary
134 internal P-state selection logic to be less performance-focused.
147 CPU scheduler in order to run a P-state selection algorithm, either
156 Without HWP, this P-state selection algorithm is always the same regardless of
163 This is the default P-state selection algorithm if the
170 Without HWP, this P-state selection algorithm is similar to the algorithm
182 This is the default P-state selection algorithm if the
203 in ``sysfs`` (and the P-state selection algorithms described above are not
457 	List of P-state selection algorithms provided by ``intel_pstate``.
460 	P-state selection algorithm provided by ``intel_pstate`` currently in
497 change in order to request its internal P-state selection logic to always set
514 selection logic by focusing it on performance or on energy-efficiency, or