Lines Matching refs:UFS
6 UFS host controller. A value of '0' means auto-hibernate is not
8 idle time before the UFS host controller will autonomously put
12 maximum value of 102300000. Refer to the UFS Host Controller
18 Description: This file shows the device type. This is one of the UFS
20 the descriptor could be found at UFS specifications 2.1.
26 Description: This file shows the device class. This is one of the UFS
28 the descriptor could be found at UFS specifications 2.1.
34 Description: This file shows the UFS storage subclass. This is one of
35 the UFS device descriptor parameters. The full information
36 about the descriptor could be found at UFS specifications 2.1.
42 Description: This file shows the protocol supported by an UFS device.
43 This is one of the UFS device descriptor parameters.
45 at UFS specifications 2.1.
52 the UFS device descriptor parameters. The full information
53 about the descriptor could be found at UFS specifications 2.1.
60 This is one of the UFS device descriptor parameters.
62 at UFS specifications 2.1.
69 enabled for boot. This is one of the UFS device descriptor
71 be found at UFS specifications 2.1.
79 of the boot sequence. This is one of the UFS device descriptor
81 be found at UFS specifications 2.1.
89 the UFS device descriptor parameters. The full information
90 about the descriptor could be found at UFS specifications 2.1.
97 the UFS device descriptor parameters. The full information
98 about the descriptor could be found at UFS specifications 2.1.
105 the UFS device descriptor parameters. The full information
106 about the descriptor could be found at UFS specifications 2.1.
113 This is one of the UFS device descriptor parameters.
115 at UFS specifications 2.1.
122 latency. This is one of the UFS device descriptor parameters.
124 at UFS specifications 2.1.
131 of the UFS device descriptor parameters. The full information
132 about the descriptor could be found at UFS specifications 2.1.
139 of the UFS device descriptor parameters. The full information
140 about the descriptor could be found at UFS specifications 2.1.
147 This is one of the UFS device descriptor parameters.
149 at UFS specifications 2.1.
156 UFS device descriptor parameters. The full information about
157 the descriptor could be found at UFS specifications 2.1.
164 supported by the device. This is one of the UFS device
166 the descriptor could be found at UFS specifications 2.1.
173 clock update. This is one of the UFS device descriptor
175 could be found at UFS specifications 2.1.
182 This is one of the UFS device descriptor parameters.
184 found at UFS specifications 2.1.
191 UFS device descriptor parameters. The full information
192 about the descriptor could be found at UFS specifications 2.1.
199 UFS device descriptor parameters. The full information
200 about the descriptor could be found at UFS specifications 2.1.
207 UFS device descriptor parameters. The full information
208 about the descriptor could be found at UFS specifications 2.1.
215 supported by the device. This is one of the UFS device
217 the descriptor could be found at UFS specifications 2.1.
225 This is one of the UFS device descriptor parameters.
227 at UFS specifications 2.1.
234 in PSA state. This is one of the UFS device descriptor
236 be found at UFS specifications 2.1.
244 This is one of the UFS interconnect descriptor parameters.
246 UFS specifications 2.1.
253 This is one of the UFS interconnect descriptor parameters.
255 UFS specifications 2.1.
264 of the UFS geometry descriptor parameters. The full
266 UFS specifications 2.1.
273 supported by the UFS device. This is one of the UFS
275 the descriptor could be found at UFS specifications 2.1.
281 Description: This file shows the segment size. This is one of the UFS
283 the descriptor could be found at UFS specifications 2.1.
290 the UFS geometry descriptor parameters. The full information
291 about the descriptor could be found at UFS specifications 2.1.
298 is one of the UFS geometry descriptor parameters. The full
299 information about the descriptor could be found at UFS
307 of the UFS geometry descriptor parameters. The full
308 information about the descriptor could be found at UFS
316 of the UFS geometry descriptor parameters. The full
317 information about the descriptor could be found at UFS
325 is one of the UFS geometry descriptor parameters. The full
326 information about the descriptor could be found at UFS
334 is one of the UFS geometry descriptor parameters. The full
335 information about the descriptor could be found at UFS
343 in Security Protocol In/Out. This is one of the UFS geometry
345 descriptor could be found at UFS specifications 2.1.
352 is one of the UFS geometry descriptor parameters. The full
354 UFS specifications 2.1.
361 This is one of the UFS geometry descriptor parameters.
363 UFS specifications 2.1.
370 are supported by the device. This is one of the UFS geometry
372 descriptor could be found at UFS specifications 2.1.
379 the UFS geometry descriptor parameters. The full information
380 about the descriptor could be found at UFS specifications 2.1.
388 This is one of the UFS geometry descriptor parameters.
390 UFS specifications 2.1.
397 one of the UFS geometry descriptor parameters. The full
399 UFS specifications 2.1.
406 the UFS geometry descriptor parameters. The full
408 UFS specifications 2.1.
416 enhanced type 1-4). This is one of the UFS geometry
418 descriptor could be found at UFS specifications 2.1.
426 enhanced type 1-4). This is one of the UFS geometry
428 descriptor could be found at UFS specifications 2.1.
436 of the UFS health descriptor parameters. The full
438 UFS specifications 2.1.
445 (method a). This is one of the UFS health descriptor
447 could be found at UFS specifications 2.1.
454 (method b). This is one of the UFS health descriptor
456 could be found at UFS specifications 2.1.
464 active ICC levels from 0 to 15. This is one of the UFS
466 the descriptor could be found at UFS specifications 2.1.
475 UFS specifications 2.1.
482 about the descriptor could be found at UFS specifications 2.1.
489 about the descriptor could be found at UFS specifications 2.1.
497 UFS specifications 2.1.
505 UFS specifications 2.1.
513 the UFS unit descriptor parameters. The full information
514 about the descriptor could be found at UFS specifications 2.1.
521 the UFS unit descriptor parameters. The full information
522 about the descriptor could be found at UFS specifications 2.1.
528 Description: This file shows LUN queue depth. This is one of the UFS
530 the descriptor could be found at UFS specifications 2.1.
536 Description: This file shows PSA sensitivity. This is one of the UFS
538 the descriptor could be found at UFS specifications 2.1.
544 Description: This file shows LUN memory type. This is one of the UFS
546 the descriptor could be found at UFS specifications 2.1.
553 occurs during a write operation. This is one of the UFS
555 the descriptor could be found at UFS specifications 2.1.
563 the UFS unit descriptor parameters. The full information about
564 the descriptor could be found at UFS specifications 2.1.
571 This is one of the UFS unit descriptor parameters. The full
573 UFS specifications 2.1.
580 the UFS unit descriptor parameters. The full information
581 about the descriptor could be found at UFS specifications 2.1.
588 the UFS unit descriptor parameters. The full information
589 about the descriptor could be found at UFS specifications 2.1.
596 one of the UFS unit descriptor parameters. The full information
597 about the descriptor could be found at UFS specifications 2.1.
604 the UFS unit descriptor parameters. The full information
605 about the descriptor could be found at UFS specifications 2.1.
612 the UFS unit descriptor parameters. The full information
613 about the descriptor could be found at UFS specifications 2.1.
621 about the flag could be found at UFS specifications 2.1.
629 UFS specifications 2.1.
638 UFS specifications 2.1.
646 found at UFS specifications 2.1.
654 UFS specifications 2.1.
662 UFS specifications 2.1.
670 about the flag could be found at UFS specifications 2.1.
678 at UFS specifications 2.1.
685 Description: This file provides the boot lun enabled UFS device attribute.
687 UFS specifications 2.1.
693 Description: This file provides the current power mode UFS device attribute.
695 UFS specifications 2.1.
701 Description: This file provides the active icc level UFS device attribute.
703 UFS specifications 2.1.
709 Description: This file provides the out of order data transfer enabled UFS
711 could be found at UFS specifications 2.1.
717 Description: This file provides the background operations status UFS device
719 be found at UFS specifications 2.1.
725 Description: This file provides the purge operation status UFS device
727 be found at UFS specifications 2.1.
735 be found at UFS specifications 2.1.
743 about the attribute could be found at UFS specifications 2.1.
749 Description: This file provides the reference clock frequency UFS device
751 be found at UFS specifications 2.1.
759 UFS specifications 2.1. The file is read only.
767 UFS specifications 2.1.
773 Description: This file provides the exception event control UFS device
775 be found at UFS specifications 2.1.
781 Description: This file provides the exception event status UFS device
783 be found at UFS specifications 2.1.
789 Description: This file provides the ffu status UFS device attribute.
791 UFS specifications 2.1.
798 about the attribute could be found at UFS specifications 2.1.
807 UFS specifications 2.1.
817 the attribute could be found at UFS specifications 2.1.
824 Description: This entry could be used to set or show the UFS device
827 0 - an UFS device will stay active, an UIC link will
829 1 - an UFS device will stay active, an UIC link will
831 2 - an UFS device will moved to sleep, an UIC link will
833 3 - an UFS device will moved to sleep, an UIC link will
835 4 - an UFS device will be powered off, an UIC link will
837 5 - an UFS device will be powered off, an UIC link will
843 Description: This entry shows the target power mode of an UFS device
850 Description: This entry shows the target state of an UFS UIC link
857 Description: This entry could be used to set or show the UFS device
860 0 - an UFS device will stay active, an UIC link will
862 1 - an UFS device will stay active, an UIC link will
864 2 - an UFS device will moved to sleep, an UIC link will
866 3 - an UFS device will moved to sleep, an UIC link will
868 4 - an UFS device will be powered off, an UIC link will
870 5 - an UFS device will be powered off, an UIC link will
876 Description: This entry shows the target power mode of an UFS device
883 Description: This entry shows the target state of an UFS UIC link