Lines Matching refs:battery

45 		Fine grain representation of battery capacity.
53 		Maximum battery capacity trip-wire value where the supply will
55 		battery discharging scenario where user-space needs to know the
56 		battery has dropped to an upper level so it can take
57 		appropriate action (e.g. warning user that battery level is
67 		Minimum battery capacity trip-wire value where the supply will
69 		battery discharging scenario where user-space needs to know the
70 		battery has dropped to a lower level so it can take
71 		appropriate action (e.g. warning user that battery level is
81 		Coarse representation of battery capacity.
91 		Reports an average IBAT current reading for the battery, over a
102 		Reports the maximum IBAT current allowed into the battery.
111 		Reports an instant, single IBAT current reading for the battery.
122 		battery.
132 		when the battery is considered full and charging should end.
141 		Reports the health of the battery or battery side of charger
154 		for a battery charge cycle.
163 		Reports whether a battery is present or not in the system.
174 		Represents the charging status of the battery. Normally this
176 		used to enable/disable charging to the battery.
186 		Describes the battery technology supported by the supply.
196 		Reports the current TBAT battery temperature reading.
207 		battery charging scenario where user-space needs to know the
208 		battery temperature has crossed an upper threshold so it can
209 		take appropriate action (e.g. warning user that battery level is
221 		battery charging scenario where user-space needs to know the
222 		battery temperature has crossed a lower threshold so it can take
223 		appropriate action (e.g. warning user that battery level is
234 		Reports the maximum allowed TBAT battery temperature for
244 		Reports the minimum allowed TBAT battery temperature for
254 		Reports an average VBAT voltage reading for the battery, over a
265 		Reports the maximum safe VBAT voltage permitted for the battery,
275 		Reports the minimum safe VBAT voltage permitted for the battery,
285 		Reports an instant, single VBAT voltage reading for the battery.
456 What:		/sys/class/power/ds2760-battery.*/charge_now
462 		coloumb counter value inside the battery monitor chip. This
464 		A userspace daemon can monitor the battery charging logic
468 What:		/sys/class/power/ds2760-battery.*/charge_full
474 		battery 'full level'. As batteries age, this value has to be
582 		devices. If enabled and the input is removed, the internal battery FET
584 		than 1uA. Note that on some devices/systems this disconnects the battery