Lines Matching full:build

26 NOTE: It may be possible to build and run this with the open-source
74 to build the port. You can also download the official release of FreeRTOS
116 To build the FreeRTOS library and the example programs, go into the
118 "make all" will build all the examples. There is another makefile in
122 By default, you will build for the Xtensa instruction set simulator. If
123 you have a supported emulation board, you can build to run on that. You
124 can also build to run on a raw Xtensa core with no board support, a
135 The build for each Xtensa configuration and target platform is placed in
137 incremental rebuilds. You may specify the root of the build area (if tou
154 Now build the FreeRTOS RTOS as a library (libfreertos.a) as follows:
175 There are more details about build options in the comment in the Makefile.
188 To build the examples for the default platform (simulator):
207 To build in a location other than the default, specify the new location
209 FreeRTOS library build makefile automatically, passing on the relevant
224 To build your application with thread-safe C library support, you
258 reent.h header into the build directory during the build process. If you
259 use a different build process, then you must make sure to copy this file
261 the build directory or the directory that contains the Xtensa port source
747     FreeRTOS build. However an application is free to take advantage of