Lines Matching +full:- +full:- +full:build
35 was last assigned to the task - which due to priority inheritance, may not
42 FreeRTOSConfig.h. We thank @mdnr-g for their contribution.
46 vTaskResume or vTaskResumeFromISR. We thank @Moral-Hao for their
49 FreeRTOS handlers for PendSV and SVCall interrupts on Cortex-M devices.
54 + Add CMake support to allow the application writer to select the RISC-V
56 + Add CMake support to allow the application writer to build an application
58 + Make taskYIELD available to unprivileged tasks for ARMv8-M ports.
59 + Update Cortex-M23 ports to not use PSPLIM_NS. We thank @urutva for their
61 + Update the SysTick setup code for ARMv8-M ports to first configure the clock
66 + Add the port-optimized task selection algorithm optionally available for
67 ARMv7-M ports to the ARMv8-M ports. We thank @jefftenney for their
71 @Moral-Hao for their contribution.
74 @Moral-Hao for their contribution.
75 + Update xTaskNotifyWait and ulTaskNotifyTake to remove the non-deterministic
82 is bigger than the inherited priority. We thank @Moral-Hao for their
89 of the stack. We thank @bebebib-rs for their contribution.
99 - Introduce Access Control List (ACL) feature to allow the application
101 - Update the system call entry mechanism to only require one Supervisor
103 - Wrap parameters for system calls with more than four parameters in a
105 - Fix 2 possible integer overflows.
106 - Convert some asserts to run time parameter checks.
114 - Lan Luo, Zixia Liu of School of Computer Science and Technology,
116 - Xinwen Fu of Department of Computer Science, University of
118 - Xinhui Shao, Yumeng Wei, Huaiyu Yan, Zhen Ling of School of
140 and de-reference it, now verify that the calling task has required
144 - vQueueDelete
145 - xQueueCreateMutex
146 - xQueueCreateMutexStatic
147 - xQueueCreateCountingSemaphore
148 - xQueueCreateCountingSemaphoreStatic
149 - xQueueGenericCreate
150 - xQueueGenericCreateStatic
151 - xQueueCreateSet
152 - xQueueRemoveFromSet
153 - xQueueGenericReset
154 - xTaskCreate
155 - xTaskCreateStatic
156 - vTaskDelete
157 - vTaskPrioritySet
158 - vTaskSuspendAll
159 - xTaskResumeAll
160 - xTaskGetHandle
161 - xTaskCallApplicationTaskHook
162 - vTaskList
163 - vTaskGetRunTimeStats
164 - xTaskCatchUpTicks
165 - xEventGroupCreate
166 - xEventGroupCreateStatic
167 - vEventGroupDelete
168 - xStreamBufferGenericCreate
169 - xStreamBufferGenericCreateStatic
170 - vStreamBufferDelete
171 - xStreamBufferReset
176 - David Reiss of Meta Platforms, Inc.
177 - Lan Luo, Xinhui Shao, Yumeng Wei, Zixia Liu, Huaiyu Yan and Zhen Ling
180 - Xinwen Fu of Department of Computer Science, University of
182 - Yueqi Chen, Zicheng Wang, Minghao Lin, Jiahe Wang of University of
184 + Add Cortex-M35P port. Contributed by @urutva.
185 + Add embedded extension (RV32E) support to the IAR RISC-V port.
190 - xTaskGetStaticBuffers
191 - xQueueGetStaticBuffers
192 - xQueueGenericGetStaticBuffers
193 - xSemaphoreGetStaticBuffer
194 - xEventGroupGetStaticBuffer
195 - xStreamBufferGetStaticBuffers
196 - xMessageBufferGetStaticBuffers
202 by @keith-packard.
212 + Add macros used in FreeRTOS-Plus libraries. Contributed by @Holden.
214 + Add assertions to ARMv8-M ports to detect when FreeRTOS APIs are called from
218 + Fix build warning in MSP430X port when large data model is used.
219 + Add the ability to use Cortex-R5 port on the parts without FPU.
220 + Fix build warning in heap implementations on PIC24/dsPIC.
221 + Update interrupt priority asserts for Cortex-M ports so that these do not fire
223 + Update ARMv7-M ports to ensure that kernel interrupts run at the lowest priority.
224 configKERNEL_INTERRUPT_PRIORITY is now obsolete for ARMv7-M ports and brings
225 these ports inline with the newer ARMv8-M ports. Contributed by @chrisnc.
226 + Fix build issue in POSIX GCC port on Windows Subsystem for Linux (WSL). Contributed
237 + ARMv7-M and ARMv8-M MPU ports: It was possible for a third party that
245 + ARMv7-M and ARMv8-M MPU ports: It was possible for an unprivileged task
254 + ARMv7-M and ARMv8-M MPU ports: It was possible for a third party that
264 + ARMv7-M MPU ports: It was possible to configure overlapping memory
270 + Add support for ARM Cortex-M55.
271 + Add support for ARM Cortex-M85. Contributed by @gbrtth.
272 + Add vectored mode interrupt support to the RISC-V port.
273 + Add support for RV32E extension (Embedded Profile) in RISC-V GCC port.
276 - Add a check to heap_2 to track if a memory block is allocated to
280 - Add a new flag configHEAP_CLEAR_MEMORY_ON_FREE to heap_2, heap_4
283 - Add a new API pvPortCalloc to heap_2, heap_4 and heap_5 which has the same
285 - Update the pointer types to portPOINTER_SIZE_TYPE. Contributed by
291 and stream buffers to be used differently - for example, some for inter core
303 is not tied to newlib and can be used with other c-runtime libraries also.
306 + Add support to build and link FreeRTOS using CMake build system. Contributed
309 + Add support for 16 MPU regions to the GCC Cortex-M33 ports.
310 + Add ARM Cortex-M7 r0p0/r0p1 Errata 837070 workaround to ARM CM4 MPU ports.
312 when using CM4 MPU ports on a Cortex-M7 r0p0/r0p1 core.
313 + Add configSYSTICK_CLOCK_HZ to Cortex-M0 ports. This is needed to support
322 observed when strict-aliasing and link time optimization are enabled.
327 without any warning with -Wmissing-prototypes compiler option.
339 The new function xTimerGetAutoReload() provides the auto-reload state as
350 + Fix a warning in tasks.c when compiled with -Wduplicated-branches
351 GCC option. Contributed by @pierrenoel-bouteville-act.
360 Contributed by @felipe-iar.
361 + Add tick type is atomic flag when tick count is 16-bit to PIC24 port. This
364 + Fix offset-out-of-range errors for GCC CM3/CM4 mpu ports when
366 + Remove #error when RISC-V port is compiled on a 64-bit RISC-V platform.
368 + Fix ullPortInterruptNesting alignment in Cortex-A53 port so that it is
369 8-byte aligned. This fixes the unaligned access exception. Contributed
373 + Change FreeRTOS IRQ Handler for Cortex-A53 SRE port to store and restore
382 + ARMv7-M and ARMv8-M MPU ports – prevent non-kernel code from calling the
392 See https://www.FreeRTOS.org/FreeRTOS-V10.4.5.html
398 + Introduce ulTaskGetIdleRunTimePercent() to complement the pre-existing
399 ulTaskGetIdleRunTimeCounter(). Whereas the pre-existing function returns
405 + ARMv8-M secure-side port: Tasks that call secure functions from the
406 non-secure side of an ARMv8-M MCU (ARM Cortex-M23 and Cortex-M33) have two
407 contexts - one on the non-secure side and one on the secure-side. Previous
408 versions of the FreeRTOS ARMv8-M secure-side ports allocated the structures
409 that reference secure-side contexts at run time. Now the structures are
414 Applications that only use FreeRTOS code on the non-secure side, such as
415 those running third-party code on the secure side, are not affected by
423 post to its own event queue. A consequence of this change is that auto-
435 (configMAX_PRIORITIES - 1) should it be set to a value above that priority.
447 + Update the ESP32 port and TF-M (Trusted Firmware M)code to the latest from
449 + Correct a build error in the POSIX port.
455 Multiprocessing Kernel. https://github.com/FreeRTOS/FreeRTOS-Kernel/tree/smp
459 …V10.4.3 is included in the 202012.00 LTS release. Learn more at https:/freertos.org/lts-libraries…
461 See https://www.FreeRTOS.org/FreeRTOS-V10.4.x.html
466 - xTaskCreateRestricted
467 - xTaskCreateRestrictedStatic
468 - vTaskAllocateMPURegions
473 See https://www.FreeRTOS.org/FreeRTOS-V10.4.x.html
475 + Fix an issue in the ARMv8-M ports that caused BASEPRI to be masked
484 + Re-introduce uxTopUsedPriority to support OpenOCD debugging.
491 See https://www.FreeRTOS.org/FreeRTOS-V10.4.x.html
500 See https://www.FreeRTOS.org/FreeRTOS-V10.4.x.html
509 https://www.freertos.org/RTOS-task-notifications.html for more information.
510 + Kernel ports that support memory protection units (MPUs): The ARMv7-M and
511 ARMv8-M MPU ports now support a privilege access only heap. The ARMv7-M
515 the Flash memory. The ARMv8-M MPU ports now support tickless idle mode.
516 See https://www.freertos.org/FreeRTOS-MPU-memory-protection-unit.html
522 collaborative development in Git. The auto-formated code is not identical
536 see https://github.com/FreeRTOS/FreeRTOS-Kernel/commits/main
541 See https://www.FreeRTOS.org/FreeRTOS-V10.3.x.html
543 + ./FreeRTOS-Labs directory was removed from this file. The libraries it
548 See https://www.FreeRTOS.org/FreeRTOS-V10.3.x.html
552 + Added RISC-V port for the IAR compiler.
557 + Correct alignment of stack top in RISC-V port when
560 + The RISC-V machine timer compare register can now be for any HART, whereas
562 + Update the sequence used to update the 64-bit machine timer
563 compare register on 32-bit cores to match that suggested in RISC-V
565 + Added tickless low power modes into the ARM, IAR and GCC Cortex-M0 compiler
567 + Updated the behaviour of the ARMv7-M MPU (Memory Protection Unit) ports to
568 match that of the ARMv8-M ports whereby privilege escalations can only
573 + Added contributed port and demo application for a T-Head (formally C-SKY)
591 + Added LPC51U68 Cortex-M0+ demos for GCC (MCUXpresso), Keil and IAR
600 + Added ARM Cortex-M23 port layer to complement the pre-existing ARM
601 Cortex-M33 port layer.
602 + The RISC-V port now automatically switches between 32-bit and 64-bit
604 + Introduced the portMEMORY_BARRIER macro to prevent instruction re-ordering
606 + Introduced the portDONT_DISCARD macro to the ARMv8-M ports to try and
608 non secure side build.
609 + Introduced the portARCH_NAME to provide additional data to select semi-
610 automated build environments.
611 + Cortex-M33 and Cortex-M23 ports now correctly disable the MPU before
614 + Added Nuvoton NuMaker-PFM-M2351 ARM Cortex-M23 demo.
615 + Added LPC55S69 ARM Cortex-M33 demo.
621 + Added GCC RISC-V MCU port with three separate demo applications.
622 + Included pre-existing ARM Cortex-M33 (ARMv8-M) GCC/ARMclang and IAR ports
627 re-added to a list, so now the timer's active status is stored separately.
661 debugger plug-ins.
677 struct to be renamed - set configENABLE_BACKWARD_COMPATIBILITY to 1 if
680 functionality in a more user friendly way - previously the generic thread
690 configSTACK_DEPTH_TYPE in place of uint16_t - that change should have been
692 16-bit limit on stack size specifications) was introduced.
731 - Improve the formatting of text that displays the available netword
733 - Introduce ipconfigSOCKET_HAS_USER_WAKE_CALLBACK option to enable a user
742 + Stream Buffers - see https://www.FreeRTOS.org/RTOS-stream-buffer-example.html
743 + Message Buffers - see https://www.FreeRTOS.org//RTOS-message-buffer-example.html
757 + Cortex-M ports push additional register prior to calling
758 vTaskSwitchContext to ensure 8-byte alignment is maintained. Only
760 requires 8-byte alignment.
762 Cortex-M devices.
765 + Updated GCC TriCore port to build with later compiler versions.
767 + The uxNumberOfItems member of List_t is now volatile - solving an issue
784 even called - previously it was only possible to abort from within the
797 checking, or high water mark checking/viewing, is in use - removing the
808 + Priority dis-inheritance behaviour has been enhanced in the case where a
820 testing purposes - although setting configUSE_16_BIT_TICKS to 1 can also
822 + Ensure the Cortex-M SysTick count is cleared to zero before starting the
824 + Add configASSERT() into ARM Cortex-M ports to check the number of priority
826 + Clear the 'control' register before starting ARM Cortex-M4F ports in case
845 See https://www.FreeRTOS.org/FreeRTOS-V9.html
855 + GCC ARM Cortex-A port: Introduced the configUSE_TASK_FPU_SUPPORT
858 + GCC ARM Cortex-A port: It is now possible to automatically save and
862 + All ARM Cortex-M3/4F/7 ports: Clear the least significant bit of the task
864 strict compliance with the ARM Cortex-M3/4/7 architecture documentation
866 + Added GCC and Keil ARM Cortex-M4F MPU ports - previously the MPU was only
867 supported on ARM Cortex-M3.
868 + ARM Cortex-M3/4F MPU ports: Update to fully support the FreeRTOS V9.0.0
872 + All ARM Cortex-M3/4F/7 ports: Add additional barrier instructions to the
874 + All ARM Cortex-M0 ports: Prevent an item being left on the stack of the
878 + Add an ARM Cortex-M4F port for the MikroC compiler. Ensure to read the
894 + Move the Xilinx UltraScale Cortex-R5 demo into the main distribution.
896 + Add Microchip CEC1302 (ARM Cortex-M4F) demos for GCC, Keil and MikroC
903 NOTE - See https://www.FreeRTOS.org/FreeRTOS-V9.html for details
911 /FreeRTOS/demo/WIN32-MSVC-Static-Allocation-Only directory is provided as
913 + Minor run-time optimisations.
923 + Major new feature - tasks, semaphores, queues, timers and event groups can
926 + Major new features - Added the xTaskAbortDelay() API function which allows
930 + Updates necessary to allow FreeRTOS to run on 64-bit architectures.
939 later re-use.
953 the array that will be used as the FreeRTOS heap, and in-so-doing, place
962 + Replicate previous Cortex-M4F and Cortex-M7 optimisations in some
963 Cortex-M3 port layers.
971 + Added ARM Cortex-A53 64-bit port.
972 + Added a port and demo for the ARM Cortex-A53 64-bit cores on the Xilinx
974 + Added Cortex-M7 SAME70 GCC demo.
987 + New IAR and GCC Cortex-R ports for microprocessors that do not use an ARM
1008 WolfSSL's re-branding.
1015 + Add demo applications for Renesas RZ/T (Cortex-R), PIC32MZ EF (PIC32 with
1024 + Added Intel IA32/x86 32-bit port.
1030 + Remove the restriction that prevented tick-less idle implementations
1045 + Update heap_4 and heap_5 to allow use on 64-bit processors.
1047 + General improved tick-less idle behaviour.
1059 + Added Atmel Studio / GCC project for the SAMV71 (ARM Cortex-M7)
1085 + Added ARM Cortex-M4F port for Texas Instruments Code Composer Studio.
1086 + Added ARM Cortex-M7 r0p1 port layer for IAR, GCC and Keil which contains a
1087 minor errata work around. All other ARM Cortex-M7 core revisions should
1088 use the ARM Cortex-M4F port.
1090 + Change some data types from uint32_t to size_t in preparation for 64-bit
1099 + Added demo application for TI's ARM Cortex-M4F based MSP432
1101 + Added demo application for STM32F ARM Cortex-M7 based microcontroller
1103 + Added demo application for Atmel SAMV71 ARM Cortex-M7 based
1116 details: https://www.FreeRTOS.org/RTOS-task-notifications.html
1119 This header file must be present to build. Note some of the obsolete
1133 + GCC, IAR and Keil Cortex-M4F ports now use more inlining (performance
1139 tick count to be read atomically (performance benefits - especially when
1142 application writer to provide their own heap array - and in so doing
1148 + configASSERT()s in all Cortex-M ports used to test the lowest 5 bits of
1154 + Cortex-A5 GIC-less port no longer passes the address of the interrupting
1156 + Fix an issue in FreeRTOS-MPU where an attempt was made to free the stack
1167 + Added port and demo application for Atmel SAMA5D4 Cortex-A5 MPU.
1168 + Added demo application for Altera Cyclone V Cortex-A9 MPU.
1192 By popular requests - a minor patch to V8.1.0 to re-instate the ability to
1203 span multiple non-contiguous memory regions.
1204 + Updated all Cortex-A9 ports to help trap a couple of common usage errors -
1208 + Update all Cortex-A9 ports to remove obsolete mode switches prior to
1211 + Update all Cortex-M3/4F ports to trap a non interrupt safe API function
1221 alternative to pdTICKS_PER_MS - both of which can be used to convert a
1223 + Fix a bug in the Tasking compiler's Cortex-M port that resulted in an
1229 + Updated the CCS Cortex-R4 port to enable it to be built with the latest
1236 + Generic IAR Cortex-A5 port (without any reliance on a GIC) introduced.
1249 + Update the IAR and DS-5/ARM RZ demos to target the official RZ RSK
1264 + Minor fixes to FreeRTOS+FAT SL - namely seeking beyond the end of a file
1266 + Ensure Cortex-A9 system registers are only ever accessed as 32-bit values,
1280 https://www.FreeRTOS.org/upgrading-to-FreeRTOS-V8.html
1282 FreeRTOS V8.x.x is a drop-in compatible replacement for FreeRTOS V7.x.x,
1287 See https://www.FreeRTOS.org/upgrading-to-FreeRTOS-V8.html for full
1292 + Event groups - see https://www.FreeRTOS.org/FreeRTOS-Event-Groups.html
1293 + Centralised deferred interrupt processing - see
1304 microcontroller - see
1305 https://www.FreeRTOS.org/STM32L-discovery-low-power-tickless-RTOS-demo.html
1317 + Add Cortex-A9 GCC port layer.
1323 V7.6.0 changes some behaviour when the co-operative scheduler is used (when
1325 behaviour of the pre-emptive scheduler is unchanged - the following
1338 set to 0, so the normal pre-emptive scheduler is being used, then task B
1344 + Update the PIC32MX port layer to re-introduce some ehb instructions that
1353 + Slight improvement to the Cortex-M4F port layers where previously one
1359 + Update the Cortex-M0 port layers to allow the scheduler to be started
1361 + Added a build configuration to the PIC32MX MPLAB X demo project that
1362 targets the PIC32 USB II starter kit. Previously all the build
1365 correctly with the updated co-operative scheduling behaviour.
1378 same tick interrupt - revert to that original behaviour.
1380 + Introduced the prvTaskExitError() function to Cortex-M0, Cortex-M3/4
1381 and Cortex-M4F ports. prvTaskExitError() is used to trap tasks that
1384 + The Cortex-M0 version of portSET_INTERRUPT_MASK_FROM_ISR and
1386 + Improved behaviour and robustness of the default Cortex-M tickless idle
1389 all Cortex-M4F ports.
1390 + Add Cortex-M0 port for Keil.
1397 + Update FreeRTOS+UDP to V1.0.1 - including direct integration of the
1411 + Added demo for the Atmel SAMD20 Cortex-M0+. The demo includes
1413 + Added a demo for the Infineon Cortex-M0 that can be built with the IAR
1416 with additional build configurations to directly support the XMC4200 and
1424 V7.5.2 makes the new Cortex-M vPortCheckInterruptPriority() function
1450 + Core kernel files now pass PC-Lint V8 static checking without outputting
1463 + ARM Cortex-A9 IAR
1464 + ARM Cortex-A9 ARM compiler
1490 include a new basic 'blinky' build option in addition to the original
1491 comprehensive build option.
1497 + Fix build error when R4 port is build in co-operative mode.
1512 the yield macros of Cortex-M and Cortex-R port layers. For efficiency
1513 the Cortex-M port layer "yield" and "yield" from ISR are now implemented
1527 + Updated the Cortex_M4F_Infineon_XMC4500_IAR demo to build with the latest
1535 https://www.FreeRTOS.org/Pend-on-multiple-rtos-objects.html
1537 ARM Cortex-M3 port layers.
1547 pre-processor macro for backward compatibility with the previous name.
1551 + Updated the CCS Cortex-R4 port layer to replace the CLZ assembler function
1559 + Minor changes to tasks.c that allow the state viewer plug-ins to display
1576 + Reworked the Cortex-M3 and Cortex-M4F port layers for GCC, Keil and IAR to
1583 macros in the Cortex-M ports. The save macro now returns the previous
1593 + Added SAM3 demos targeting the ATSAM3S-EK2 and ATSAM3X-EK evaluation
1604 + Added a FreeRTOS+ sub-directory. The directory contains some FreeRTOS+
1608 + Added a demo that targets the Atmel SAM4S Cortex-M4 based microcontroller.
1609 The demo is preconfigured to build using the free Atmel Studio 6 IDE and
1626 + Add #error macros into the Keil and IAR Cortex-M ports to ensure they
1629 + Added comments in the FreeRTOSConfig.h files associated with Cortex-M3 and
1630 Cortex-M4 demos stating that the configMAX_SYSCALL_INTERRUPT_PRIORITY
1634 + Added two new list handling macros - for internal use only in upcoming new
1654 + Cortex-M3 Tasking
1658 + Cortex-M0 IAR
1659 + Cortex-M0 GCC
1660 + Cortex-M4F GCC (with full floating point support)
1693 + Correct the alignment given to the initial stack of Cortex-M4F tasks.
1697 the port making use of the traceTASK_DELETE() trace macros - leaving this
1703 V7.1.0 as it broke the IAR plug-in.
1724 that build with Eclipse to include a #error statement informing the user
1737 + Cortex-M4F IAR port.
1738 + Cortex-M4F Keil/RVDS port.
1746 the IAR STM32F407ZG-SK starter kit.
1755 can execute stand alone - without being connected to the debugger.
1759 return parameter sub-strings.
1766 ports - including the new TriCore port where the checked pointer does not
1769 up when a task is deleted - again this is required by the TriCore port.
1777 + The legacy trace mechanism has been completely removed - it has been
1784 - the queue structure includes an additional member to hold the queue
1787 - the queue structure includes an additional member to hold a queue
1790 - the TCB structure includes an additional member to hold a task number
1795 + Added two new trace macros - traceTASK_PRIORITY_INHERIT() and
1849 + All ARM IAR projects have been updated to build with the latest V6.2.x
1854 + The old Virtex-4 Microblaze demo has been marked as deprecated. Please
1855 use the brand new Spartan-6 port and demo in its place.
1905 transparent to users and do not effect the pre-existing API.
1936 GCC, Keil, and RVDS build tools, and all use the PSoC Creator IDE.
1942 revisions, and the new J-Link debug interface DLL.
1966 allows them to effectively start in the Suspended state - a feature that
1979 + Fixed some build time compiler warnings in various FreeTCPIP (based on
1981 + Fixed some build time compiler warnings in Demo/Common/Minimal/IntQueue.c.
1992 https://www.FreeRTOS.org/RTOS-contributed-ports.html
2002 + SuperH SH7216 (SH2A-FPU) port and demo application added.
2006 be defined when a memory protection unit (MPU) is being used - and then
2023 + Altered pxPortInitialiseStack() for all Cortex-M3 ports to ensure the
2027 The following minor changes only effect the Cortex-M3 MPU port:
2047 which does not include MPU support, and FreeRTOS-MPU which does.
2049 in support of FreeRTOS-MPU.
2061 setting up the initial stack of a task - removing the need for
2077 + Posix simulator has been upgraded - see the corresponding WEB page on the
2127 + Added a new demo application for the Atmel AT91SAM3U Cortex-M3 based
2129 + Added a new demo application for the NXP LPC1766 Cortex-M3 based
2136 statistics gathering feature - and include a served WEB page that
2184 + Included FreeRTOS-uIP - a faster uIP. This is not yet complete.
2194 + BUG FIX - set the PIC32 definition of portSTACK_GROWTH to the correct
2195 value of -1.
2207 + Completely re-written port for ColdFire GCC.
2230 build and therefore allow use of the KickStart (code size limited)
2237 allows the omit-frame-pointer optimisation to be turned off.
2245 used to allow the use of a floating point co-processor. The
2263 + Added the ST Cortex-M3 drivers into the Demo/Common/Drivers directory to
2287 + Support added for the new Luminary Micro LM3S3768 and LM3S3748 Cortex-M3
2300 + Efficiency improvements to the Cortex-M3 port layer. NOTE: This
2308 + Ports that used the arm-stellaris-eabi-gcc tools have been converted to
2309 use the arm-non-eabi-gcc tools.
2317 + Removed some redundant casting that was generating warnings - but was
2328 + Updating demos to allow more to run with the co-operative scheduler.
2329 + Fixed co-operative scheduler behaviour upon the occurrence of a tick
2358 without the -fomit-frame-pointer option, and at all optimisation levels.
2365 xQueueSend() function - which is maintained for backward compatibility.
2376 + Optimised the GCC and IAR port layer code - specifically the context
2386 + Added an lwIP demo for the STR9 - thanks ST for assistance.
2408 + Added STMicroelectronics STM32 Cortex-M3 demo application.
2413 + Introduced configKERNEL_INTERRUPT_PRIORITY to the IAR Cortex-M3, PIC24
2416 + Updated the PIC24 and dsPIC demos to build with V3.0 of the PIC30 GCC
2430 + Added -fomit-frame-pointer option to lwIP SAM7X demo makefile.
2438 + Added Cortex-M3 LM3S811 demos for GCC and IAR tools.
2443 + Added -fomit-frame-pointer option to Rowley ARM7 demos as work around
2447 + CO-ROUTINE BUG FIX: Removed the call to prvIsQueueEmpty from within
2479 + Modified the AVR demo applications to demonstrate the use of co-routines.
2494 + When ending the scheduler - do not try to attempt a context switch when
2510 + Added a port and demo application for the Cortex-M3 target using the IAR
2512 + The ARM Cortex-m3 Rowley projects have been updated to use V1.6 of the
2518 + The uIP Rowley project has been updated to build with V1.6 of CrossWorks.
2560 + Added new co-routine functionality.
2575 This is to allow co-routines to run when there are no tasks.
2583 + Changed the WinAVR makefile to make chars signed - needed for the
2584 co-routine code if BaseType_t is set to char.
2585 + Added new demo application file crflash.c. This demonstrates co-routine
2586 functionality including passing data between co-routines.
2587 + Added new demo application file crhook.c. This demonstrates co-routine
2589 a co-routine.
2593 demo co-routines as an example of their use.
2600 some systems when the code is executed using a j-link debugger. The
2601 j-link macro file configures the PLL before the code executes so
2643 Changes between V3.2.1 and V3.2.2 - Released 23 September, 2005
2648 + Updated the J-Link macro file included with the SAM7X uIP demo project
2649 to allow the demo board to be reset over the J-Link.
2651 Changes between V3.2.0 and V3.2.1 - Released 1 September, 2005
2666 Changes between V3.1.1 and V3.2.0 - Released 29 June, 2005
2686 Changes between V3.1.0 and V3.1.1 - Released 21st June, 2005
2703 Changes between V3.0.0 and V3.1.0 - Released 11th June, 2005
2715 + Updated the CrossWorks uIP demo to build with V1.4 of CrossWorks.
2716 + Slight modification to the SAM7 release build configuration to correct
2721 Changes between V3.0.0 and V2.6.1 - Released 23rd April, 2005
2731 - API changes
2741 - New ports
2750 - Directory name changes
2765 - Kernel and miscellaneous changes changes
2776 in each of FreeRTOS/Demo subdirectories - as it's settings relate to
2791 + The GCC AVR port is now build using the standard make utility. The
2817 Changes between V2.6.0 and V2.6.1 - Released Feb 22, 2005
2826 + AVR port - Replaced the inb() and outb() functions with direct memory
2827 access. This allows the port to be built with the 20050414 build of
2829 + GCC LPC2106 port - removed the 'static' from the definition of
2832 + GCC LPC2106 port - Corrected the optimisation options in the batch files
2834 -o is replaced by an uppercase -O.
2835 + Tasks.c - The strcpy call has been removed when copying across the task
2844 + SAM7 USB driver - Replaced the duplicated RX_DATA_BK0 in the interrupt
2848 Changes between V2.5.5 and V2.6.0 - Released January 16, 2005
2858 Changes between V2.5.4 and V2.5.5 - Released January 3, 2005
2872 + Minor modifications to the SDCC build files to allow their use under
2879 Changes between V2.5.3 and V2.5.4 - Released Dec 1, 2004
2888 Changes between V2.5.2 and V2.5.3 - Released Nov 2, 2004
2895 optimisation levels - including -Os.
2902 Changes between V2.5.1 and V2.5.2 - Released Oct 26, 2004
2908 Changes between V2.5.0 and V2.5.1 - Released Oct 9, 2004
2921 Changes between V2.4.2 and V2.5.0 - Released Aug 12, 2004
2924 schemes - so you can choose the most appropriate for your application.
2940 Changes between V2.4.1 and V2.4.2 - Released July 14, 2004
2945 Changes between V2.4.0 and V2.4.1 - Released July 2, 2004
2947 + Rationalised the ARM7 port version of portEXIT_CRITICAL() -
2952 Changes between V2.4.0 and V2.3.1 - Released June 30, 2004
2954 + Added the first ARM7 port - thanks to Bill Knight for the assistance
2961 Changes between V2.3.0 and V2.3.1 - Released June 25, 2004
2968 Changes between V2.2.0 and V2.3.0 - Released June 19, 2004
2980 Changes between V2.1.1 and V2.2.0 - Released May 18, 2004
2989 Changes between V2.1.0 and V2.1.1 - Released March 12, 2004
2991 + Bug fix - pxCurrentTCB is now initialised before the call to
2996 Changes between V2.0.0 and V2.1.0 - Released Feb 29, 2004
3032 Changes between V1.2.6 and V2.0.0 - Released Jan 31, 2004
3042 kernel that are unused by an application to be excluded from the build.
3051 has a higher priority than the calling task - assuming the kernel is
3056 Changes between V1.2.5 and V1.2.6 - Released December 31, 2003
3062 0x18 to 0x08 - where it should have always been. The incorrect address
3118 The zip file also contains a pre-release version of the PIC18 port. This
3135 have been modified for use with the September 2003 build of WinAVR. No
3158 at improving the context switch time - with is now approximately 10% faster.